DIY Height Standards (for WOB, Sheaf, Keg over bar)

How to make your own height standards to practice your height events for Highland Games or Strongman including Weight Over Bar (WOB), Sheaf Toss, or Keg Over Bar, up to 18ft. Set up can be done by 1 person in under 10 minutes and no support wires/ropes are needed. Total cost of this DIY project is under $70 and it will pretty much last forever (I made these 4 years ago). Materials List below.
1:27 laying it out
2:17 stringing the rope
2:49 lashing to the crossbar
3:36 standing it up
4:57 lashing the standards
5:45 hoisting the crossbar
6:22 raising the height
8:45 materials list
Materials List
(2) 2"x 10' ABS ($7 ea)
(2) 1-5/8" x 10' Galvanized metal fence post or electricians conduit ($13 ea)
(4) 3/4" x 24" Nail Stakes/contractors stakes ($4.50 ea)
(2) 3/8" eye bolt with nut ($1 ea)
75' small common rope bundle ($5)
(1) 3/4" x 10" schedule 40 PVC electrical conduit ($3)
(2) hand clamps with about a 2" opening capability ($1 ea)
Tools List
Hammer
3/8" drill bit and drill

[@tatts2000]

Thanks for posting this video it is excellent. I have made 2 sets of these standards over the last few years! Both going strong and broken down will fit inside a 2020 pathfinder for transport. Only negative is inflation, materials will set you back $130