DIY Home Heat Reduction: Insulation Foam Installation│Water Snake 101

Welcome to my very first DIY video. In this episode we will be installing an Insulation Foam to beat the summer heat. I am not expert installer but merely finding out alternative ways to keep down the burning temperature during summer. This installation is the fastest and easiest way so solve your heat problem. It may not look good but is very much effective.
Hope you enjoy the video.
Water snake 101
#insulationfoam
#heatreduction
#DIY
Music Titles:
My Contention
No Worries
Beat Provided By freebeats.io
Produced By White Hot
Camera Panasonic Lumix GX85
Hive Blog - hive.blog/@wat...

[@alphaellarma4228]

based on my observation lang ang insulation foam absorb all heat all day, the problem is when shiny side are not facing the heat source kapag hapon at pagabi na medyo mainit parin. kaya dapat talaga ang shiny side are facing the heat source para nag rereflect lang ang heat pataas hindi pababa. not advisable narin sguro ang double sided na shiny. one side is enough basta tama pagkakalagay.

[@chrislloyd123]

The shiny part should face up to reflect the radiant heat up, if the shiny part faces down.. you'll just reflect the radiant heat down towards the people... Makes the room hotter, same as an oven, you could see that the shiny walls(topside and sides) of the oven faces on the food you place inside, effectively cooking the food.... In your case you are not cooking the people inside the room... There should be an air space between the roof and the foil(foil part must face upwards) to effectively reduce the heat of the room

[@primoxanthous511]

foil insulation is a radiant barrier, and it works by reflecting heat from the metal, but for it to do its job, there has to be a layer of air between the roofing and the foil.

[@justsomedude2020]

Hi sir, how far should the foam be from the roof? Also if there's only one side of the shiny part, which part directs outward (facing roof)

[@eslante]

@@justsomedude2020 Mr. Google said shiny part idk the name should face the sun

[@chrislloyd123]

The shiny part should face up to reflect the radiant heat up, if the shiny part faces down.. you'll just reflect the radiant heat down towards the people... Makes the room hotter, same as an oven, you could see that the shiny walls(topside and sides) of the oven faces on the food you place inside, effectively cooking the food.... In your case you are not cooking the people inside the room... There should be an air space between the roof and the foil(foil part must face upwards) to effectively reduce the heat of the room

[@rcane6842]

@@chrislloyd123 I agree with this guy. Just look at "AtticFoil" channel, discussing the concept behind radiant barrier. It bewilders me that even the local engineers install it upside down. Not even providing a gap. It should at least be installed below the rafter, with the shiny part facing the sun. Let me know if I've missed some info, Peñas.

[@rcane6842]

@@chrislloyd123 a question for you since you seem to know some details about radiant barrier. Would it matter if you use a regular foam versus a fire-retardant one (popular in Lazada recently) for additional heat insulation? If you look at the videos uploaded by AtticFoil channel though, they're saying that the foil itself is enough as a radiant barrier, reflecting radiant heat (their product) by as much as 98%*. * - with their professional installers

[@fern5758]

Dapat may air space young insulation tsaka yung mismong ceiling para magbounce off yung init na narereceive. Pag nakadikit kasi sa ceileng yan iaabsorb lang din nung mismong material yung heat.

[@ryansobrevega7251]

Tama!

[@kervinmorta655]

Haha eto lng nkita kong comment n tama..ndi tlga nila nilalagyan boss..ewan ko ba..

[@terencemitchao]

ah kaya pla mga sinaunang bahay gnyan, kahit wla pa insulation nun, pero na notice ko meron ventilation yung mga kisame sa labas ng bahay, jan siguro labasan ng init? hehe

[@josephfreo24]

@@kervinmorta655 sinabi nya naman sa huli na dapat sa inside the ceiling ilalagay kaso kulang sya sa resources. :)

[@shruglife994]

@@terencemitchao yup walang double walling kaya tagos hanggang buto yung init. Hehe minsan maganda mabango lage bahay kasi lagi naiinitan. Kaso pag sumobra init di kana makapag siesta sa kwarto lalo na pag 10 am to 4 pm mainit padin.

[@mhadiesirens7190]

Nice boss. ito yung pinaplano ko para sa room ko. mabuti nlng nag search ako. maganda rin pala sabi kasi nung iba parang disco😂.. pero okey lng ibabagay korin nman sa paint ng wall😁 Gray color. and some Brickwall self adhesive.

[@WaterSnake101]

Ok din naman kung iisipin mo parang industrial warehouse theme. Need lang talaga ng creativity.

[@junelalib800]

Wag mo gayahin yan baliktad pag ka. Lagay

[@SuriyaPrakash-xn7bg]

Thanks for making your DIY project as a video. I got an idea of how to install thermal proofing for my house. Especially thanks for the materials.

[@WaterSnake101]

You are most welcome. I'm glad to have shared the idea.

[@hritikhritik1128]

Where can this material be available

[@journey_the_yatra]

Good idea

[@tjahangon7286]

Many thanks for recording and sharing the process

[@okinawajapan8895]

Shiny material should be facing the heatsource, and sadly its a common yet a malpractice here in the Philippines, wherein most installers do it the other way around

[@bersabeharris4680]

Sir, How do you do if both sides have shiny both sides then? This one is shiny on both sides so it dont matter i think. Remember this is just a DIY project, and still effective as he says. Any more idea you have please share im sure we will appreciate it. Thanks

[@okinawajapan8895]

@@bersabeharris4680 Reflective material on both sides? Then there’s no debate, as im referring to common malpractice placement of single sided insulation foam

[@mistercat5300]

I think available sa PH is double sided kasi to prevent heat from out side and locking cool air inside.

[@yusrilatib4212]

Tq for info. I have single shiny side, so i put it towards the heatsource

[@rrskaartihan7461]

Thanks for the idea, especially the materials needed to buy

[@deenperodua2u]

Better next time take thermometer before and after install.. can see the different temp to make sure the foam is true effect

[@thanesha83]

thermohygrometer

[@cebkun]

Nice! plano ko gawin yan sa room ng GF ko. grabe kahit binilihan ko ng Aircon, ramdam ko yung heat sa taas

[@WaterSnake101]

Sure ako makakatulong yan sa bawas init. Sure din ako na makakadagdag naman ito sa init ng inyong pag mamahalan. 💕

[@cebkun]

@@WaterSnake101 wahahahaha

[@radzi1969]

Nice STP t-shirt! Nice DIY.

[@WaterSnake101]

Thanks bro! 90s the best!

[@nhoyvlogs9757]

Sakto ang Search ko nito content nyo Sir!

[@WaterSnake101]

Maraming salamat sana makatulong 😊

[@holyshit9218]

Some guy in tiktok said that u should put it in reverse. The shiny part should be facing the roof and the white one should be facing down

[@vxiozn.v2653]

yes its true, but the foam he have has shiny material bot side

[@motherofaSpecialGirl_Vlog]

Hello po new subsciber here kasi sinasagot mo talaga mga tanong. It means you value your subscriber. 👍👍👍

[@WaterSnake101]

Yes we love our subscribers and interacting with them. Maraming salamat sa pag subscribe. It means a lot to us. ♥ ♥

[@pyroromancer]

paint the foil inside the room with latex based paint. 3 flat coats or 2 semi-gloss coats will do the trick Some heat will leak through and as soon as it transfers to the foil inside the room it will radiate into the room. painting with two thick coata of latex paint will further increase heat insulation. think of the latex paint coating like the electrical cord of an appliance. The rubber layer insulates the heat generated by the electrical.current. Fill the spaces between the rolls with silicon or latex caulk first. Edit if your insulation has a strong bond to the ceiling covering the gaps with aluminum tape works just fine.

[@GodsBlessing00]

boss, is it okay to buy a double sided foam insulation for my wall and paint the foil the outer side with latex based paint? or should I paint the inner side facing the wall?

[@pyroromancer]

@@GodsBlessing00Paint just the inside facing foil. The foil sticking to the wall should remain unpainted. This way the heat can be reflected back into the wall and not between the foils nor into the room.

[@virgelntv3568]

Pandagdag banas pa pala iyan..pag ganyan yung pagkainstall..it works by reflecting heat from the metal,but it must have a layer of air for circulation..

[@shruglife994]

Old house ako lumaki and wala siyang double walling so pag tag init tagos sa loob yung init hanggang sa buto ko haha. So plan ko maglagay ng insulation. Napadaan lang for ideas.

[@WaterSnake101]

Effective sya against heat. Sana makatulong.

[@miketolentino2132]

Ayos ah bro nakikita ko yan ginagamit sa mga ducting sa aircon

[@maywill1626]

Great idea. Thank you.

[@WaterSnake101]

I'm glad I could help. 😊

[@CutzMcOnions]

boss depende sa init mabilis mabulok to. lulusot ung tack sa foil. baka malaglag agad yan pag wlang brace or atleast metal tape.

[@WaterSnake101]

Thanks for the advise sir. Dadagdagan ko sya ng brace.

[@danclydetaclibon9267]

hello po, tanong ko lang po kung anong magandang brace po dito?

[@slofo6260]

Thank you for this amazing idea it really helps

[@quatrical]

Good job bro! Mas maganda sana kung may comparison ng temperature before and after. But so far ok naman 👍

[@WaterSnake101]

Tama ka sir should have included the temp. Thanks 😀

[@jeffersonuy2399]

@@WaterSnake101 ano po yung temp?

[@apoloniad.6503]

@@HealingBeats777 ako dn yan gusto ko lagyan insulation foam un room namin kc 12nn onwards napakainit naktpat kc s araw un pader

[@apoloniad.6503]

@@HealingBeats777 lagyan n lng ntn sis pti halaman dw sis para halaman mgaborb ng init 😅

[@maciejfassa4394]

If you are changing windows or doors in your home, or just starting to build one. Look at Dako products.

[@Libouh]

Hey great video bro I gonna try it

[@WaterSnake101]

Awesome it will definitely help especially this summer.

[@rasoolkeuusoolfatimakekhet72]

I think you should apply this sheat from outside.

[@vxiozn.v2653]

exactly, he done it wrong

[@nba2kliveremastered]

what is the proper installation for single sided? nkaharap ba sa bubong yung makintab?

[@WaterSnake101]

Yes sir shiny side up pang reflect ng heat.

[@okinawajapan8895]

@@WaterSnake101 then, you’ve installed it the other way around, shiny material acts as heat reflector

[@bersabeharris4680]

He used double sided not single sided. Thanks for sharing.

[@okinawajapan8895]

@@bersabeharris4680 then good, but if single sided was used, then its another story

[@AJBuen]

nice! try to look outside the room where the cold air leaks and seal it too.

[@WaterSnake101]

Thanks for the tip! So far sabi nung technician kulang daw talaga yung 1 hp para sa room.

[@KoDenzell]

Good job

[@michaellahananbetudio8529]

Yung shiny side up daw dapat to reflect the heat?

[@WaterSnake101]

Yes shiny side up dapat if single sided. Pero since dual sided yung ginamit ko any side would do 😊. Suggest ko din yung 10mm ang kapal.

[@Karthik_I_Am_]

Great DIY Btw! Can you tell me where can i buy the insulation foam?? I tried looking up in Amazon and couldn't find any that fits your product. Could you please share the Amazon link so that i can find it and buy it here in india. Much appreciated! Brother 👍🏼

[@WaterSnake101]

Hello friend I'm from the Philippines and I bought this from our local hardware store. This looks similar just not sure if the same www.amazon.in/SmartSHIELD-Reflective-Insulation-Radiant-Heat-Cold/dp/B07PLKLZFM/ref=mp_s_a_1_11?dchild=1&keywords=insulation+foam&qid=1615168912&sr=8-11 But it is 5mm I used 10mm. Hope it helps 😊

[@GeoPancho]

you can buy that foam at hardware sir.☺️

[@lilielhotiby2329]

I need to know what do you call that type of material here in the U.S. I tried to search insulation foam on home depot and lowe's here and nothing come up. Need something like this for my garage/gym so my clients don't end up passing up from the heat.

[@WaterSnake101]

You could try to search for reflective foam insulation shield. I think they have it in Amazon.

[@lilielhotiby2329]

@@WaterSnake101 hey thanks . I’ll try to do just that.

[@WaterSnake101]

Awesome hope I was able to help.

[@Dnrjhn7]

Nice STP's Purple shirt, Sir!1 btw thanks for this video, im doing insulation rn! Haha

[@WaterSnake101]

Yes sir. STP rules Scott Weiland will always be remembered.

[@Luna-oo4fs]

Can I stick wallpaper on it?

[@WaterSnake101]

Maybe but it could fall off due to heat in the long run.

[@ziondevera2168]

hot air goes up! remember that

[@unsopken0623]

Baliktad ata... well kung gusto mo magibg oven ang kwrto boss.

[@lexheart5877]

Question po sana po masagot, pede po kaya pinturahan ung insulation foam? Ayoko po kse nung kulay gusto ko puti lang ....kso ceiling ko kase hardiplex eh kaso mainit pden

[@WaterSnake101]

Pwede naman siguro. Di ko pa na try. Maganda kung may sobra kang insulation foam try mo muna yung paint dun para malaman kung ok at hindi mag flake or matanggal. Balitaan mo na lang ako if ma try mo parang gusto ko ding subukan. Para kasi kaming nasa space ship 😂

[@lexheart5877]

@@WaterSnake101 ahahahaha XD sige po salamat sa pagsagot try ko po ahaha XD try ko mag upload haha

[@roadth1379]

Sir kamusta po ung foil sa kisame ? hindi naman sya nalalaglag ? pwede po ba sya itucker gun ng walang brace?

[@WaterSnake101]

Ok naman sir di nahuhulog. Walang brace tacker lang.

[@roadth1379]

@@WaterSnake101 buti sir kinaya ng tucker gun ung 10mm na foil?

[@WaterSnake101]

@@roadth1379 kaya naman sya. Until now hindi sya nahuhulog.

[@knitzieknitzogena95]

hi sir. question po. anu po kayang pwede ilagay jan sa insulation foam para di naman po kita ung silver na kulay sa foam?. pwede po kaya sya dikitan ng wallpaper foam? ung uso po ngayon. or anu po masuggest nyo sir? salamat po

[@WaterSnake101]

Uu nakita ko ung mga foam na pang ceiling. Maganda sya pero baka mahulog sya agad kung glue lang ng wallpaper. Ang iniisip ko pintahan ng white ang problem lang is baka mag flake ang pintura in the long run. Pero kung staple gun mo din yung wallpaper sa tingin ko tatagal sya.

[@bersabeharris4680]

Will liquid nailworks kaya? I think if you put 3D foam wall paper it will look more better, watch other videos on YT who used one and it looks good.

[@apoloniad.6503]

Kuya pwede po ba sa pader and ano po ba pwede ipangdikit gun tucker po ba or pakuan n lng

[@WaterSnake101]

Ok lang tacker gun basta plywood. Di ko lang sure kung ok sa hardiflex.

[@rodelscreation]

Hello po sana, manotice toh 👋🙌❤️. Naka kisame po yung tiny room ko pero diko nasya mabaklas pero pwede ko nmn ipasok from outside side part po may access ako ok lng po ba khit ipasok kunlng sya kahit dikona idikit, basta ilatag kolng boss mageefect po kaya sya?

[@WaterSnake101]

Yes sir pwedeng pwede. Sa loob talaga sya dapat mas effective

[@crashercrasher9696]

Yes, paps, pwede at tama yan naisip mo paglalagay ng insulator, dapat nasa loob siya ng kisame, tapos yong silver part nakatapat sa metal roof may airgap sa gitna para maka singaw ang init sa loob ng kisame

[@buleigh8906]

ask ko lang po pano po kung ang pag kakabitan eh bakal tulad ng purlin at angle bar pede po ba glue stick?

[@WaterSnake101]

Baka po mam mahulog pag glue stick sa katagalan. Kung open ceiling po kagaya sa warehouse nakaipit sya ng mga bakal. Nakita ko lang warehouse sa work ko.

[@buleigh8906]

un nga po pinag iisipan ko kc open nga po wala pa po talagang ko same xa bali po kc long span po yero tas purlin nga po cguro po i siksik na lang po sa mga bakal kaso po mali do😔 super init kc

[@cesaralgerre1915]

yung bubong ng ofc eh semento, balak namin lagyan ng insulator katulad sa gamit mo sir, kaya ba ng "bostik no more nails" ang gamit pandikit instead na double sided tapes?

[@mhikko147]

Pwede ba to? Ung 2nd floor ko kasi made out of double wall wood, kaya mainit pag hapon, kaya kasa tangalin ung init pag na insulator ung loob? Balak ko kasi lagyan ng aircon din

[@WaterSnake101]

Yes po mas maganda talaga pag sa loob nakalagay. Laking tulong din sa aircon

[@AAAA-qc7io]

Bale ilang meters po lahat ng nagamit niyo and how much?

[@KatieNeric]

di ba pwedi na pasukin nlng ang kisame tas doon iinstall para no need baklasin? may manhole nman po kisame namin

[@WaterSnake101]

Kung kayang pasukin why not? Mas maganda talaga sa loob nakalagay. Ingat lang baka mahulog, minsan kasi mahina yung kisame baka mag ka gastos pa. One more thing sure ako sobra alikabok sa loob. Pero sa tingin ko wag na lang siguro safety first.

[@sunsetabandon2350]

Does this work for the firewall?

[@WaterSnake101]

Not suggested for firewall

[@felizardojrcanonigo0197]

Bossing ba sya baliktad ang nstall sa foam...?

[@ninjanigelo535]

Magkano po isang rolyo nyan sir?

[@WaterSnake101]

Per meter po yung benta nila. Parang 110 yata per meter if I recall correctly. Di ko lang sure if magkano 1roll baka mas mura.

[@30slifebelike45]

Pag pinunturahan po kaya ang insulation effective parin for the heat reduction?

[@WaterSnake101]

Wala naman magiging problems sa heat reduction. Di ko lang sure baka mag flake yung pintura sa katagalan.

[@30slifebelike45]

@@WaterSnake101 ok po thank you sa idea will try this one soon po

[@cjayzepeda9140]

pwede po ba sya sa pader na bato? tapos back to back tape lang gamit?

[@WaterSnake101]

Pwede naman sir bawas init din. Baka lang matanggal yung tape sa katagalan.

[@klarkvirtuso5665]

@@WaterSnake101 ano po maganda gamitin pag concrete yung ceiling?

[@alducenteisabella589]

I already put insulator on my window so that the heat in the sun won't go inside my room but it's not working 🤦🏻‍♀️😔

[@lauroagaceta5332]

How much it cost

[@joeyf.233]

Can we use liquid nails as an adhesive upon installation sa ceiling? Double sided din sya.

[@WaterSnake101]

Not sure sir. Never tried liquid nails before. If mabilis sya ma tuyo and dumikit sa ceiling ok naman siguro.

[@kevin-zv7dg]

Ramdam ba temp difference before and after installation?

[@WaterSnake101]

May big difference po sya. Dati pag tinaas mo lang kamay mo ramdam mo na yung init galing sa kisame. Ngayon kahit hipuin mo yung foam hindi mainit.

[@kevin-zv7dg]

@@WaterSnake101 sige sir, thanks for replying, pnplan ko kasi mag install, the only problem is cement yung pag mmountan ko

[@pinoysimpilot7394]

magkano po ung material na yan po ngaun?

[@binabdullah1416]

Sir I watched ur video regarding sa pag install nyo po ng insulation sa kisame nyo po,tanong ko lang po sir,does it work para maibsan ung init sa room nyo po?tq po sir...

[@WaterSnake101]

Yes sir nakaka bawas po sya. Pero kung kaya much better sa loob ng kisame.

[@binabdullah1416]

@@WaterSnake101 tq sir pero cguro gagayahin ko na lng ginawa nyo kc gaya nyo rin tight din ako sa budget

[@jakegois2572]

Okay lang po ba na kahit walang aircon yung room, gagamitan nito ?

[@WaterSnake101]

Bawas init pero mas maganda pa din may Aircon. Lalo na pag summer

[@jlo3368]

effective po b tlgang nkkawala ng init even when u install it in ceiling?sabi kc need airspace daw..

[@WaterSnake101]

Nakabawas po sya. Pero best pa din kung sa loob ng ceiling.

[@razeldevera4836]

Pwede po bang idikit yang reflective insulation s roof kahit walang gubeda ung ceeling.?kumbaga direkta s roof.

[@WaterSnake101]

Ah derecho po sa yero? I think ok yun kasi sa mga warehouse ganun yata pagkakabit.

[@nikohiroyagami8377]

Lagay k air vent. Exhaust fan.

[@dimgru9905]

Ask ko lang po, hindi ba dapt yung aluminum side nya ang nakaharap sa roof? Para madeflect ang heat or ano po ba talaga ang proper way?

[@WaterSnake101]

Shiny side up. Double sided Yung ginamit kaya any side ok lang 😃

[@Ratatatmotovlog]

@@WaterSnake101 what if One side lang meron Paano ang Tama pag kabit?

[@miguelcarlosenriquez7053]

Pwede po ba 3m double advesive tape gamitin para dumikit sa ceiling?

[@WaterSnake101]

Sa kainitan mahuhulog yun sir. Bili ka na lang ng tacker gun para sure. Mga 300-500 pesos sure yun di maguhulog.

[@joysalarda5055]

Hello po sir.pwede po bang ipagitna sa metalfurring at hardiflex ang insulation foam

[@joysalarda5055]

Sana masagot niyo ako sir.salamat po.

[@WaterSnake101]

Pede po yun. Mas maganda talaga kung sa loob nakalagay. Pero yung shiny part ng insulation dapat laging naka harap sa yero to deflect heat. Sana po nakatulong 😊

[@judiediezmo6576]

Lumamig naman ng sobra sa inyo Sir?

[@WaterSnake101]

Nabawasan ung init. Unlike dati sobrang init ng ceiling. Mapapasin mo yung difference.

[@hwfranjr]

Ya might ant to invest in a stapl gun,ooops see ya figuered it out,lol

[@waltergillian4748]

Can we use normal foam?

[@WaterSnake101]

I'm not sure it will work. Insulation foam has a reflective surface against heat.

[@lloydjasonpacana5415]

May link description sa tucker gun? San mo po yan nabili boss?

[@WaterSnake101]

Sa local hardware lang namin po dto. Pero marami din po sa shopee search nyo lang po tucker gun

[@thatsnicayt]

How many meters po ang isang roll ng insulation foam?

[@WaterSnake101]

Not sure how long is one whole roll. Sinukat lang namin how long we need then sila yung nag putol.

[@xiankentpaul6203]

Saan po kayo nakabili ng insulation?

[@WaterSnake101]

Local hardware store meron yan.

[@roycasilag02]

Pwede po ba kahit walang kisame yung bubong pwede magkabit nyan salamat

[@WaterSnake101]

Pwede Nmn po basta makabit nyo😁

[@shoichimakoto3703]

kuys di po ba nag cacause ng sunog kasi mag papalagay din sana ako sa kwarto namen e sobrang init don kasi siya pinaka tuktok na floor

[@WaterSnake101]

Di naman wag na lang mag laro ng apoy sa kwarto. Depende na rin kung anong apoy 😂

[@shoichimakoto3703]

@@WaterSnake101 i mean sa init ba HSHSHSH diba may mga ano wildfire ganon keme HSHSHSH

[@shoichimakoto3703]

@@WaterSnake101 oke

[@gopalganjnews1587]

Iss material ka name kya hai

[@belovedtiffany4926]

Hi how about po if sa wall na hindi na finishing..ano pw pweding gamitin para idikit yung insulator?

[@WaterSnake101]

Sa bato na wall ba? Hindi ko sure baka rugby pwede.

[@itsmekimmy25]

Wag po rugby kasi masisira yung foam, silicon gamitin mo yung sealant ata yun

[@melfransbacon9483]

sa loub ba dapat nakaharap yung foil nya? Kala ko kasi sa taas dahil dun nanggaling ang init.

[@WaterSnake101]

Yes sir sa loob po talaga sya dapat. Di ko kasi kaya baklasin yung kisame baka masira ko pa. Dual sided po yung foil nya. Merong single yes po dapat yung foil sa taas. Laking tulong din sya kahit sa labas ng ceiling nakalagay.

[@BoikTVOfficial]

Samin dre dapat buong kwarto. Pati pader. Hahahaha

[@WaterSnake101]

Uu pre alam ko yung iba pati pader talaga nilalagyan.

[@roadth1379]

Sir ilang horsepower po ung aircon nyo?

[@WaterSnake101]

1hp lang po dyan pero nag upgrade na kami to 1.5 may video din kami 😊

[@roadth1379]

@@WaterSnake101 Kamusta po ung 1hp nung may insulation na kayo? naka subscribe na po ako sir salamat

[@WaterSnake101]

@@roadth1379 kulang sir malaki kasi yung room namin kaya kami nag upgrade ng 1.5. Ngayon sobrang lamig na kahit mainit sa labas. Laking tulong ng insulation din. Salamat sa pag subscribe sir 😀

[@AlyVillanueva]

Question po, pwede po bang pinturahan yung insulation foam?

[@WaterSnake101]

Di ko pa na try baka kasi mag flake yung paint pag tumagal.

[@pattyquin1481]

Hi po ask ko lang kung anong size po ng staples ang ginamit nyo na bala ng staple gun? 😅

[@WaterSnake101]

13/08 8mm yung nakalagay sa box. Yun yung ginagamit sa upholstery.

[@mrangelo2717]

Boss, ok lang ba isang layer lang ikabit? or mas maganda ba dalawa o higit pa? balak ko maglagay din nang ganito sa kisame mismo DIY lang din. Salamat.

[@WaterSnake101]

Isa lang ginamit ko yun 10mm yung kapal. Double sided ung foil. Kung single sided lang bibilin mo yung foil ang dapat sa taas.

[@mrangelo2717]

@@WaterSnake101 Sige boss, Salamat.

[@zenbermudez8604]

Pwede po ba mauna ilagay ang insulation foam kaysa hardiflex?

[@WaterSnake101]

Yes po mas maganda sa loob sya ng kisame.

[@emmanuelmanahan3866]

Not Good. I suggest na dapat ay tinanggal nyo muna Yero at sa taas nyo nlng sana kinabit. Lulundo yan katagalan

[@WaterSnake101]

Tama sir dapat talaga sa loob sya nakalagay. Pero hindi ako pro baka masira ko pa sya lalo. Limited budget to hire a professional. Totoo maari syang lumundo in the long run planning to add the wooden braces. Maraming salamat sir sa feed back.God bless.

[@alvinmalicdem8563]

Ano po yung lundo?

[@emmanuelmanahan3866]

@@alvinmalicdem8563 Luluwag yung pinagkakabitan hanggang sa bumaba

[@vicbarb8135]

Pag single side lng un silver nya, un silver po ba ang dapat nkadikit sa yero? Thanks

[@luke_1234]

Stone Temple Pilots shirt

[@WaterSnake101]

Yes sir! The greatest era

[@jenethira4225]

Hai. .tanung lang po??pde ba rugby lang idikit. .taz wala na brace?

[@WaterSnake101]

Hello pwede naman walang brace. Kung rugby mahuhulog di agad kakapit. Tacker gun na lang makabili ka mga 300 pesos. Sure na di maguhulog.

[@lineman896]

Yung insulating foam nkaka soundproof din pobah?

[@WaterSnake101]

Hi hindi sya effective for sound proofing.

[@samweldtv]

Musta ano po ang result?

[@nicacatalan4193]

how much po kaya yung ganyan

[@sheilamarieeusebio9941]

hi po pno mglgay nian if trusses po un pgddikitan.? slmt po

[@terencemitchao]

mas maganda, if di pa nainstall ang roof. so bale truss pa lang, tapos layer ng metal wires na nakadiagonal, purpose nyan para di mag sag yung insulation... tapos insulation, if one side lng yung foil, dpat yung foil nakatapat sa bubong, so metal on metal, at foam yung kita sa kisame, then yun install na din yung roof. gnyan gnawa namin kahit naka install na ang roof, matrabaho lng ksi, tatanggalin ang roof tapos install yjng insulation, tapos balik nman ulet ang roof. pero malinis tingnan pramis, worth it ang effort

[@sheilamarieeusebio9941]

@@terencemitchao slamat po sa reply.. kaso po ang situation is my bubong na po

[@paulineanido8922]

Pwede po ba magdikit sa pader? If yes ano po the best na ipandikit?

[@WaterSnake101]

Pwede naman hindi nga lang magandang tingnan tulad ng ceiling ko. Kung kahoy pag kakapitan ok yung tacker gun. Kung bato naman siguro uubra naman yung rugby.

[@TitaD527]

Panu kaya kung slab ang ibabaw

[@WaterSnake101]

Sorry for the late reply. Cement slab po ba? Alam ko po may ibang ginagamit dun. Di ko lang sure if mag work sya dun.

[@janemaddela847]

Magkano po lahat ng nagastos niyo sa buong insolation?

[@cyrusmagoncia9159]

Hello! Paano po kapag sa bubong? Saan kaya po pwede ipako?

[@WaterSnake101]

Wala kisame sir? Dun na lang sa pamakuan ng yero pwede. Hindi ko lang sure kung derecho sa yero kung anong magandang pandikit. Maiinitan kasi maaring mahulog sa katagalan.

[@cyrusmagoncia9159]

@@WaterSnake101 salamat sir

[@mincassy6922]

1:40 nagstart

[@WaterSnake101]

Paensya na po na mahabang intro. Medyo na dala lang sa edit 😁

[@koli154]

D ba yan baliktad?

[@WaterSnake101]

Double sided po sya kaya any side pwede.

[@mollybolly680]

Mas better po bang maka absorb ng hest and double sided or yung one side lang?

[@euphydev]

gumana po ba?

[@WaterSnake101]

Opo effective naman po sya

[@euphydev]

@@WaterSnake101 thank u sir

[@claudioromantiko684]

Mas magnda single sided lng mainit pa rin yn

[@specfei9895]

Dapat sa loob ng kisame ilagay yan diba

[@WaterSnake101]

Yes sir tama.

[@user-fp2mp8kl4t]

Sa akin kasi boss isa lang yung foil paano po to?

[@WaterSnake101]

Basta yung foil dapat sa taas.

[@MsJonna13]

Mas effective ba pag nasa loob sya ng ceiling??

[@WaterSnake101]

Yes po sa loob talaga sya dapat ng ceiling. If may budget or kayang ilagay much better.