DIY How To Build a Homemade BBQ / Fire Pit || DIY BBQ Pit || Awesome DIY BBQ Pit || DIYFIREPIT

[@axcreates_official]

Hello friends! Thank you for watching ❤️😀👍

[@The1davidb]

Wow that professional work right there. Very nice!

[@axcreates_official]

Thank you! Cheers!😊❤️👍

[@cokhichetao72]

Woh!nó nhìn lạ lùng và rất cứng cáp, tốt lắm 👍

[@axcreates_official]

Cảm ơn. 😀

[@josecantuiii2638]

Good video

[@axcreates_official]

Thank you.

[@yazdankhodabandehloo1429]

کارت عالیه ، آفرین .

[@axcreates_official]

👍

[@junbarz361]

No doubt about the welding skills...nice work!

[@axcreates_official]

Thank you. 👍

[@mushtaqahmed4548]

Very good excellent work and job amazing

[@axcreates_official]

Thank you.

[@craftstest]

Great Work > super super super like Good luck 😍❤️😍❤️😍❤️😍

[@axcreates_official]

Thank you

[@kevincris0615]

Saved the video to see if one day i dare to build one. I have all the tools but no idea where to get the material. Amazing job

[@axcreates_official]

Thank for watching. Some of the materials you can get at a local hardware store and the scrap yard for the bigger stuff. Hope you make it one day.

[@dom5775]

Nice job ax creations

[@axcreates_official]

_HAUNTED? Thanks, more videos coming up soon.

[@moiseshernandez872]

That’s beautiful thank you Master for teaching us

[@axcreates_official]

My pleasure, thank you.

[@cutweldngrind]

I just built a tail gate grill for my truck and have some scrap to try building this. I love welding even though I have alot to learn. This is nice.

[@axcreates_official]

Thank you, I appreciate the positive comment. I’d like to see what you built. I love welding myself. It just takes practice, but it does help a lot that you like welding. 👍👍👍

[@cutweldngrind]

@@axcreates_official I work 50 to 60 hour weeks so I am very limited to work on my hobby. I also wish I knew how to use a torch since my plasma cutter only cuts and sometimes I need to bend metal. I have some scrap metal and was going to make a fire pit. Its been super hot here in south Texas and we should be around 108F today and the next few days. Well it looked awesome.

[@axcreates_official]

Jorge Serna that’s hot! And you have the humidity too!! Well stay safe working those long hours and keep up the good work!

[@sttm1283]

nice. looks like a fun project to do.

[@axcreates_official]

It was! Thank you.

[@HalitOguz-m4d]

Sehr guter Grill gute Arbeit bravo ❤👍👍💪💪👌👌😍🤩🥰😅💯🔥

[@axcreates_official]

Thank you ❤️❤️👍👍

[@dt9094]

Nice to watch a professional. Attention to detail. Outstanding, thank you

[@axcreates_official]

Thank you sir for your comment and support.

[@man-bj7nh]

Dang fine work buddy! Keep the good videos coming

[@axcreates_official]

Thank you very much. 👍👍

[@williamlott7612]

It’s like a mini Santa Maria BBQ grill; well done. Maybe for your next one you could make a heavy duty version 😂. Darlington, South Carolina

[@axcreates_official]

Thank you 👍

[@MakeItMetal]

Now that's a serious bit of kit..love it :)

[@axcreates_official]

Thank you. 👍

[@Hustler210]

That’s dope

[@axcreates_official]

Thanks ❤️👍👍

[@teamcq9204]

Great work. One heck of a job

[@axcreates_official]

Thank you very much for your comment. 🙏👍

[@dianaguerzoni1371]

Molto molto ben fatta e funzionale! 👏 Complimenti

[@joesask857]

nice

[@axcreates_official]

Thank you. 👍

[@mikenobbe1135]

very nice i have one made out of stainless

[@axcreates_official]

Thanks. Stainless had to look nice! 👍

[@ernestoescobar8450]

Buen video..good work

[@axcreates_official]

Gracias!🙏

[@kristopher5184]

this is nice neat work

[@axcreates_official]

Thank you 👍

[@bigamp3700]

Great job would love to have one

[@axcreates_official]

Thank you👍

[@junjie3949]

awesome!!! that's a bomb proof bbq grill

[@axcreates_official]

It sure is! Thank you for watching. 👍🙏

[@imin2cad]

Nice I got to learn to weld!

[@axcreates_official]

Thank you sir. 👍You can pickup an inexpensive wire feed welder fairly cheap now.

[@ibuildengines]

Nice pit! I built one out of 36” diameter pipe for my patio a few years ago and love it... I like the wheels.

[@axcreates_official]

Thank you Jeff. 36” is a very good size. Yes, the wheels are helpful because the pit was pretty heavy, but it works great. Thanks again for your feedback and support.

[@joshsoorlin579]

Where do u get a stubby piece of pipe like that

[@axcreates_official]

Check Metal Recycling yards, local Fabrication shops. They throw away lots of scrap metal, including pipe. You can also check platforms like OfferUp and Craigslist. Hope this helps.

[@joshsoorlin579]

@@axcreates_official ya good idea, im suprised ur channel has not blown up - really well made vids for the last half a year, ur only 1 vid away prolly

[@axcreates_official]

Thank you for you kind words. I’m Trying my best to provide the best content and share my ideas for everyone to make and enjoy. Thanks for your support. 🙏👍

[@kareemjohnson8059]

Thts a damn good grill. I want one now

[@axcreates_official]

Thank you.

[@danielcalderon4439]

Excelentre trabajo

[@axcreates_official]

Gracias👍

[@Borinqueneer65th]

This was awesome. I cannot weld but it is a great skill. Thank you for the video. If you ever get to a point to giving one of these away, please throw my name in the pot. God bless.

[@axcreates_official]

Thank you. Will do!!👍

[@mccosti]

Very good my friend you have lots of skill and great ideas

[@axcreates_official]

Thank you and thanks for watching.

[@tommyjohnson3566]

Great Job. That's awesome.

[@axcreates_official]

Thank you sir.

[@turtlelifecover9113]

nice work 👍

[@axcreates_official]

Thank you.

[@yvesf5355]

Real Nice Job ,I just started welding and this look's like a real nice one to try Thanks

[@axcreates_official]

Thank you. Hope you make one. 👍

[@Unwrapasmile]

WOW absolutely love this, that will produce some awesome cooks.

[@axcreates_official]

Thank you. Yes it does!👍

[@genarorodriguez5617]

Thanks I needed this video I'm gonna make the same one but out of a barrel

[@axcreates_official]

Thank you. Yes, that’ll look nice.

[@ababoy4228]

Ok I’ll just get on it

[@slabcityslobbers6444]

Very nice!

[@axcreates_official]

Thank you 🙏

[@husafel]

Outstanding!!👍🏼

[@axcreates_official]

Thank you.

[@filomenaregan1537]

Awesome 👏 a true craftsman.

[@axcreates_official]

Thank you 🙏 for your comment and support.

[@ajsironworks3937]

Nice work sir.

[@axcreates_official]

Thank you for your comment. 👍🙏

[@sunnyshukrware308]

Wonderful

[@axcreates_official]

Thank you. 🙏👍

[@Tatal.b]

Goooooood 👍👏🙏🍀🇧🇷

[@hdwoodshop]

Nice and indestructible. How’s it holding up? Wonder about a drip hole. And thermal insulation for the bearings.

[@axcreates_official]

Thank you. Holding up great!! I did end up drilling a drip hole, good point bty. I didn’t use any bearings.

[@hdwoodshop]

@@axcreates_official the bearings is whats allowing the caster wheels to spin. Ball bearings to be exact.

[@axcreates_official]

👍Yes, I understand the casters have bearings, but they don’t get hot enough to get damaged. You can use a high heat lubricant if needed. www.amazon.com/dp/B00AFTGN0M/ref=cm_sw_r_as_gl_api_glt_fabc_BW5M7H4ASK7CKCSW7F02?linkCode=ml2&tag=alexpalominos-20

[@picamedina9055]

Muy bueno

[@axcreates_official]

Gracias

[@vickifrakes2761]

Love it.

[@axcreates_official]

Thank you 🙏 The next one is in-progress.

[@beverlyhillstowtruck5806]

Wow this guy is awesome 👏😎

[@axcreates_official]

Thank you for your support. 👍

[@luisgilbertolermasanchez7017]

Excelente trabajó.

[@axcreates_official]

Gracias👍

[@mateicristi2524]

Thank you for not putting background music.

[@axcreates_official]

Thank you for watching.

[@jorisdugouchet6243]

👌👍

[@axcreates_official]

👍😀

[@darnell714]

I would love to have one just like that

[@axcreates_official]

Thank you.

[@johnupchurch7685]

Awesome job!

[@axcreates_official]

Thank you very much. Thanks for your support. Have another design coming soon.

[@bobbybigtimes9579]

Perfect!

[@axcreates_official]

Thank you.

[@vovazanser3197]

Понравилось

[@791번지]

잘 만드시네요 vrey good ~

[@axcreates_official]

Thank you.

[@taedzamtambanengwe5061]

Legend!

[@axcreates_official]

Thank you 🙏 👍

[@Reza-lb3tp]

❤❤❤

[@juancasas539]

Muy buen trabajo 👍 y la cerveza?

[@axcreates_official]

Muchas gracias por su comentario. Sí claro. 👍

[@hammer7226]

Super cool, what gauge of expanded metal did you use?

[@axcreates_official]

Thank you, It was about 1/8" in thickness!!!

[@mikec.8556]

Nice job should have added a door on the bottom for ash removal and air flow

[@axcreates_official]

Yes, good point, but its big enough where airflow is not a problem and neither is cleaning. Small hand brush and dust pan work just fine. thank you for watching and your feedback.

[@1kzrider]

I like it if you lived near me would pay to have one made even. Great job.

[@axcreates_official]

Thank you very much for your comment. 👍 I can’t do it now, but I think eventually I’ll make them for anyone that wants one. Thank you again.

[@bradhouston4734]

Awesome!! Now I have massive welding equipment jealousy! By the time that I would buy the welder and parts it would defeat the purpose. One day though!

[@axcreates_official]

Thank you. It's just a great feeling seeing the final product knowing that you built it.

[@bradhouston4734]

@@axcreates_official 100% I used to love metal work at school. My wife doesn’t believe that I could make things nowadays but I’m pretty confident that I’d get back in the welding groove. I built a whole hard top pop up camper trailer in year 12, which I’m still proud of!

[@axcreates_official]

That’s awesome. You should get back into it. Some might argue that it’s cheaper to buy a lot of what you see in KZbin, but it’s also about creativity and often times making something out of nothing.

[@engabu3li]

It's better if you add a ventilator hole with valve to control fire and the heat Nice job

[@axcreates_official]

Great point, thank you.

[@martinbenta9612]

Ok super

[@axcreates_official]

Thank you 🙏

[@simongarza6670]

Awsome work! I think would have left a little 1/2 lip on the cooking grate to keep stuff from rolling off. But very nice build.

[@axcreates_official]

Yes, that’s a great idea. Will definitely do that next time. Thank you for your support and feedback.

[@Белогоръ]

👍🏻 С руками, Premium.

[@axcreates_official]

Thank you. 👍

[@diclas3712]

Nice work!

[@axcreates_official]

Thank you

[@colinmccauley3301]

really liked the video. is this what welders do for fun?

[@axcreates_official]

Yes, that’s what we do and we enjoy it. Thank you for your comment and your support. 👍

[@Nathan-wn5mc]

I would like to buy one like like this, quality looks amazing!

[@axcreates_official]

Thank you for your comment and support. I am not able to make more at the moment, but will definitely contact you when I’m able to.

[@davidanderson3999]

Nice build,finally someone used supports on the mesh, in stead of floppy grate and saying it will work, flopping with nothing on it

[@thegoodhopegroupthegoodhop5637]

Nicely built but one fundamental flaw. You need to have an air intake at the bottom of the barrel under the coals to cause a draught to keep the fire going. Easy to amend.

[@axcreates_official]

Very good point. Thank you for your feedback. 👍

[@Dom-yv4nq]

Ok, I just got to learn how to weld. Dammit! Lol

[@axcreates_official]

You can buy a beginner’s welder fairly cheap. Lol. 👍

[@aastangeland]

Love it. :-)

[@axcreates_official]

Thank you 👍

[@micmike]

Make a clean out door for the ash and it's perfect!

[@axcreates_official]

Yes. It’s a good idea. I thought about it, but it’s so big that’s it’s super easy to clean. However, I do believe that it would also give it more character. Stay tuned for next Sunday. Have another one coming. Thank you for watching and your feedback.

[@curtishardison630]

This is awesome craftsmanship. But, I don't ever see a ground clamp when you are welding. I like how you tack everything with a torpedo level and then finish welding. I use an Old Lincoln "Tombstone" stick welder at my shop at home.

[@axcreates_official]

Thank you for watching. 👍

[@gwhack]

The steel table he is working on has the clamp attached to it, any metal item placed on top is automatically grounded assuming the metal is clean.

[@webersonsantos1179]

top demais

[@sarojdhungana8239]

Can you please make industrial looking hookah 😁😁😁

[@axcreates_official]

I can definitely try. 😆

[@Sweet..letssurf]

Great but where do I get a 24” slice of pipe from?

[@axcreates_official]

Scrap yard and local fabrication shops. They scrap lots of good building materials.

[@Sweet..letssurf]

I’ve been checking yards for anything / tanks Ect no luck but ty,, I’ll see if there’s a fabricator around

[@danielcalderon4439]

Gracias esas barbacoas son muy lindas en mi pais usamos para asar la carne una parrilla y poco brasas y lleva tienpo asar la carne aqui es un arte asar carne un abrazo amigo mira videos de argentina como hacemos asado

[@axcreates_official]

He visto muchos videos amigo. Sin embargo, solo he comido El asado Argentino. Y en mi opinión el asado Argentino y el Uruguayo son dos de los mejores.

[@primo40J]

How thick is your metal on the bottom

[@axcreates_official]

3/16”

[@jhreportage]

Fabulous project ! As a complete beginner, it'd be good to understand the type of welder you've used?

[@axcreates_official]

Thank you for watching. The process is GMAW, commonly know as Mig. I’m using a solid wire electrode with a 75%Argon -25%Carbon Dioxide gas mixture. With this same process, you can use a flux-cored wire that is self shielding and doesn’t require the gas mixture.

[@mehdi5369]

@@axcreates_official سلام متشکرم سیم جوش بدون گاز کیفیت جوشش اندازه جوش سیم جوش با گاز محافظ میشه استاد؟؟؟ ❤️❤️❤️ ممنون میشم اگه جوابمو بدین 🙏🙏🙏

[@gregatkins3750]

Hey your skills are bad ass! This is a great pit. Can you build me one. I’d be happy to pay you

[@axcreates_official]

Thank you. I'm not making them to sell at the moment.

[@deanvoss7098]

No air damper at bottom.. Hmmmm... Looks great...

[@axcreates_official]

Thank you. It’s such large diameter that it works just fine. Thanks for your feedback.

[@pyasahaina]

There should have been a hole at the bottom to dump the ash out easily. But this is an awesome video.

[@axcreates_official]

Thank you for watching. Yes, that’s a good idea. I thought about it, but It’s such a large diameter pipe that it’s super easy to scoop them out with small dust pan and brush. Thank you for you feedback. 👍

[@chaldeani6884]

I love it! What’s the name of the welding machine you are using? I wanna buy one!

[@axcreates_official]

Hi, thank you for your comment. What I’m using is a 110v mig welder. Nothing fancy, really a beginners welder, but does the job. If you’re interested, you can pick up a mig welder fairly cheap. It depends what you want. This is what I use. www.amazon.com/Hobart-500559-Handler-Welder-115V/dp/B009X43F38 This is not an affiliate link, just want to show you what I use. Hope this helps.

[@chaldeani6884]

@@axcreates_official Thank you so much!

[@axcreates_official]

You’re welcome. 👍

[@machenesononloso]

how you will wash the grill after cooking?

[@cuanham]

very nice work. but an idea for improvement, space the bottom coal grid a bit off the pot floor and add some air vents

[@axcreates_official]

Yes. That would help. Thank you for watching. 👍

[@erlindamatzelt7204]

I Wish CAN i have one bro, ,

[@axcreates_official]

Thank you for watching. I can’t make them at the moment, but perhaps in the near future I will. Thanks again.

[@bill.Latham]

You deserve that steak great job. It makes me one to build from a 55 gallon drum.

[@axcreates_official]

Thank you. Yes, 55 gallon drum will look awesome. Hope you build it. 👍

[@gabriellara17]

What brand of drill bits are you using?

[@axcreates_official]

The drill bits are Norseman SP-21 Magnum. Hope this helps. Thank you for watching.

[@gabriellara17]

@@axcreates_official I have begun making same pit except I had a piece of 30' inch pipe, great video

[@axcreates_official]

@@gabriellara17 That’s awesome. That’s going to look even better my friend!! 👍👍

[@FordF-ic7el]

Cómo se llama esa regla para medir el círculo del tubo? Minuto 2:48 name?

[@axcreates_official]

Este no es un enlace de afiliado. Solo quiero mostrarte lo que es. Estoy seguro que puedes encontrarlo más barato en otros lugares. Espero que esto ayude. www.amazon.com/-/es/Asistente-Wraps-Wrap-extra-large12/dp/B004GZACV2/ref=asc_df_B004GZACV2/?tag=goshpmobuses-20&linkCode=df0&hvadid=461605090218&hvpos=&hvnetw=g&hvrand=18224906166653615004&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9052636&hvtargid=pla-305977016283&psc=1

[@scuzi423]

Would you make another one for me please.. I’d buy it.. please ?

[@axcreates_official]

Hello, Thank you watching and your interest in buying one, I'm honored. However, I am unable to make it at the moment, but perhaps in the near future .Thank you again for your support.

[@MrNovruz]

Nice work !!!

[@axcreates_official]

Thank you 😀

[@bobpurvis5922]

No air holes it will smoke!

[@gman2013]

“Hold my beer I gotta build something!”

[@axcreates_official]

Right ! Lol. 👍

[@rock4us2]

What is the paint you used called? I am looking for it

[@axcreates_official]

This is what i used. Thank you for watching. This is not an affiliate link. Rust-Oleum 7778830 High Heat Enamel Spray, 12 oz, Bar-B-Que Black www.amazon.com/dp/B0010O0C94/ref=cm_sw_r_sms_api_glt_fabc_fl3cGb6M59C3V

[@JRDelirious]

How about a way to empty the ashes and a drain/vent hole(s)..

[@trevorjarvis3050]

I’m bettin this guy is a pipe fitter/welder... I’m gonna make this out of an old tractor rim