DIY - How to replace a VW MK4 shift boot and knob

[@dave2metz]

I saw your video on KZbin, went to your website, and bought a shifter boot for my 2006 Volkswagen Jetta 2.5. It was at my door within a few days and the installation was a piece of cake. The black leather and shifter knob look primo in my whip. I'll be ordering other things in the near future. Much appreciated! Thanks.

[@WaleAkinsefunmi-ci9pl]

Wish i would've seen this earlier, bought one without the clamp. Thats what brought me here!!! Awesome video!!

[@gdibble]

Thanks, helped a lot. Unfortunately I did not have End Nipper Pliers but I used large wire cutters with much more effort to remove; it all worked out fine in the end. Your video provided the necessary guidance :)

[@michaelm9621]

I just purchased the Shifter boot from you for my 2006 Jetta TDI, great video man. Thanks for what you do.

[@tonyrichardson9028]

VW gear knob and boot Instal worked perfectly. Thanks for the very useful video.

[@silverjay4455]

best video out here, really appreciated, straight to the point my friend

[@__K__B__]

It's not seated properly. I just watched this video before doing mine and I screwed it up because I used your video as a reference. Look at where your old knob was sitting and then look at how far down the new knob is (go to 1:11 then compare that to 1:51). It's not all the way seated to the bottom and once you squeeze that clamp you're screwed. You should really update this or put a comment in.

[@junior0851]

+Kenan Bakin You know what? I never seen that when watched a while back. Thats crazy.

[@Vago_Vagueto]

that's exactly what I noticed first... he clamp it in the wrong place.and not in the "grippy" area where.it suppose to be.

[@gailcottom4589]

cable tie?

[@jkkendall5550]

Mine seated all the way down when I bopped it. 2002 VW Golf GLS TDI. Works great. My minor complaint is the nipper didn't open wide enough, but found my husband's larger nipper and that worked. Desmond Rader wrote1 year ago "That little metal piece is called an ear clamp, for anyone who has to replace theirs like me :) "

[@JiriMachovec]

Short shifter upgrade :D

[@gailcottom4589]

Great! Thanks for that. I was trying to figure out how to replace this gear shift! thanks

[@justinbeamon6624]

didn't know it was that easy you guys are awesome

[@shawkinguk]

Great video Just installed my new shifter with help of this ! Thanks so much for posting

[@Lessthanthreeedm]

There are a few types of knobs. It's like 12mm, 24mm or something like that. Which part is being measured to determine which size I need? Or do all 6 speed knobs should fit right on?

[@cycle4lifeac]

Hey Aaron. Looks like your replacement shift knob and boot don't mount as far down the stick as the factory one. Doesn't seem to clamp on the knarled area. Can you confirm this? Could the shift stick be cut down to accomidate this?

[@fezzial]

so fresh and clean looking, thanks for the vid, helped me out alot

[@largol33t1]

Did VW change the shift boot design for the 2015-16 model years? I have an MK 7 GTI. Is the MK 4 design too old to use on it? I find the shifter too small and actually grip it by the neck out of habit.

[@brandonvella7442]

I need to replace that black plastic interior furnishing under the gear knob that goes around towards the ashtray also . What do you call that by pls?

[@karlir0uw]

hey bro thanks for the vid tutorial, i have a question for change knob for mk3 is same???? thanks

[@sailortrash55]

How do i remove the shift knob from the boot itself? Id like to get a custom knob but i cannot seem to separate the two AT ALL! I have the exact same car as you and hopefully you can be of help thanks

[@Lameducks]

I would hope you figured this out in the last 3 months but for anyone else, Grab some pliers and pull the plastic cylinder INSIDE the boot and the shift knob itself away from eachother, it holds the boot to the knob, and its just a well made pressure hold.

[@sailortrash55]

Thanks, of course mine was the one that couldn't be taken apart so I bought a new shift boot and knob which I was able to separate this time.

[@uefalover]

sailortrash55 were did you buy your shift knob and boot. I am having the same problem and I too want a custom shift knob

[@RollYourRock]

Will this Knob/Shifter Boot assembly fit my 2003 Golf 2-door 5-Speed 1.9L TDI? Thanks! 🙂

[@unique9101]

Ya mk4s should all be the same

[@RollYourRock]

@@unique9101 Thanks! 🙂

[@unique9101]

@@RollYourRock np 😁

[@TuneMyEuro]

We're sold out right now, but our website normally sells them for $125 shipped anywhere in the USA

[@basscubs]

Hey, I have bought a few products, but I was curious if you had any insight on upholstery. My driver side cloth material on my 04 mkIV is starting to "loose stickiness and it falls off exposing the orange insides, Im constantly shoving it back in, damaging the cloth. If you have any videos or DIY tricks I would be great appreciative. I love your simple products and fix its. bless up!

[@jjrangel90jr]

I've been trying to do the same as both of my mk4 door panels and the rear small ones are doing the same. Haven't found a diy on it yet

[@bdog840]

Use 3M general glue adhesive it worked on my headliner that was falling down.

[@blackstormx6x]

thanks! you saved me a trip to my mechanic!!

[@Taylorcadiz]

I want that identical shift knob from the mk4 like the one you just showed .. will that fit on my mk3 98 jetta vr6? thanks

[@TuneMyEuro]

I'm sorry, it will not fit your car.

[@skaterman60]

Does anyone know if you can put a threaded shift knob adapter on the shaft for an aftermarket shift knob?

[@TheIcyIsaac]

+skaterman60 Hey can u?, i'm wanting to do the same thing

[@TuneMyEuro]

Yes, you can buy it at home depot in the plumbing department

[@alexjb99]

Looking for shorter shift stick for VW Jetta mk5--Do you know where I can find one? Do they sell them anywhere, or do I need to modify my existing one? Thanks.

[@user-dn6qy1ou1f]

Cut the shaft down. It will mount the same way. And if you don't have the clip, use a hose clamp

[@johnathanmuneshwar3764]

Will the shift knob and boot for my 2001 passat come with everything I need from your site, including clamp?

[@johnathanmuneshwar3764]

FixMyVW.com by AARodriguez

[@TuneMyEuro]

No, but we do have Passat shift boots, are you sure your's has a clamp? Some screw on with no clamp.

[@johnathanmuneshwar3764]

FixMyVW.com by AARodriguez yes, I've taken mine out and I see the clamp similar to the one shown in this video

[@SacreDro]

Hi, I'm searching for a used car. Does a worn shift knob reflect if the cars has been beaten up?

[@supratwinturbo5961]

hey , is it possible to buy only the ``clamp`` because i would like to keep my old shifter (still in great condition , looks good) and to change the leather only and i saw in ur video that u need to break up that little ``clamp`` so i would need another 1 u know ... and if yes , can u tell me where can i buy that thing

[@TheMoyerJkm]

what if i just want to replace the knob.......

[@JuanPablo-rd2ix]

Did you ever figure that out

[@TheMoyerJkm]

@@JuanPablo-rd2ix yeah you gotta get a tap and dye set and thread the shift lever to match the threads of your desired shift knob average tap and dye set is like 50$ i for one went the other route and bought a 13 civic si instead

[@JuanPablo-rd2ix]

@@TheMoyerJkm thx I'll do the tap and dye set or just do some jank shit

[@TheMoyerJkm]

@@JuanPablo-rd2ix before i gave my vr6 to my brother i put a dragonball knob on mine and used a crown royal bag as the shift boot came out really nice

[@hedezitro]

Is it the same for a seat leon 1m? I mean the golf shifter knob also fits on the lseat leon ?

[@user-dn6qy1ou1f]

You can also cut down the shaft and use that clip or a hose clamp to secure it. Easiest way to shorten the shifter. And it's free!

[@allfair4759]

thank you from Germany

[@saralfc6]

Thanks for this vid. Gonna try it on my polo :)

[@All_i_want_is_a_slammed_Mk4R32]

i think the european shifter is different… it’s not just a metal rod on it underneath, there’s loads of plastic and other bits

[@benaarsify]

good explenation nice and easy thumbs up

[@hphgrwlv]

thanks it was a great video. It really helped me

[@rockeylane1909]

Does it have to be a VW replacement or can it be a aftermarket shift knob??

[@user-dn6qy1ou1f]

It can be whatever you can make work

[@DrjerzMusic]

What is that clamp called and where could I buy another one? I want to keep the old boot and knob just in case something happens to the new one I purchased

[@user-dn6qy1ou1f]

Any parts store will have them. They are a factory style hose clamp. And used on every single half shaft

[@lechwadcanadrenii7153]

Perfect! Thank you!

[@s.schwarz4864]

COOL,...you are great!! -GolfMk4Fanatiker-

[@blendoben]

Will this fit my car? 2000 vw jetta glx vr6

[@user-dn6qy1ou1f]

Yes

[@BigRyGuy04]

The $125 part he's referring to is the entire console below the ashtray. Read first. It usually helps ;)

[@Kingofheavyweights]

Not into vw but damn that was quick and easy haha

[@firebird091]

question does this fit the seat ibiza mk3 2002 ??

[@dezrad11]

That little metal piece is called an ear clamp, for anyone who has to replace theirs like me :)

[@jeremyfrank6252]

Thank you!!! I don't feel like buying a new shift know for a clamp

[@WaleAkinsefunmi-ci9pl]

Any way I can get that white clamp piece? The new kit I just ordered just git ripped in half by the Mechanic.... I need a clamp please!! Website doesn't have the clamps....

[@DanielTillotson]

You could probably find it in almost any plumbing section at a home improvement store

[@WaleAkinsefunmi-ci9pl]

Daniel Tillotson I'll give it a try, Thanks!!

[@reidpierzinski1976]

my leather and knob are all fine, my issue is the knob is turned and I want to turn it back to normal. Help? I just bought the car today and it was like this.

[@buncha1gays]

Do you guys have the shift boot and knob that has a larger diameter hole? I bought one of these and the hole was waaaay too small

[@TuneMyEuro]

No, we don't have a larger sized hole, are you in Australia?

[@user-dn6qy1ou1f]

Just drill it out

[@eazyvertwrld7393]

is there any diference between knobs for gasoline cars and diesel ?

[@user-dn6qy1ou1f]

None at all

[@lowpez55]

Help! My 2004 gti vr6. Dash display don't work. Everything works but the screen you know gas mpg and temperature. Can you help?

[@krex50]

I have been looking g all over the place trying to find performance parts for my mk4 2.0 can any one point me in a good direction

[@juanm2898]

Thanks a lot !!!

[@wyattgross7579]

Could I put a MK1 shift knob on my MK4 golf?

[@user-dn6qy1ou1f]

You could put clear bowling ball with a fetus on it if you wanna

[@BigRyGuy04]

Then buy it?

[@BigRyGuy04]

Any ideas where to pick up those end-nipper pliers? I've never seen them anywhere.

[@user-dn6qy1ou1f]

Dude. They are literally everywhere!

[@jarr5648]

Ok thanks.. Keep up the good wrk...

[@myflorin25]

oau that was quick THX buddy

[@ELRAPIDO4KVS]

BRAVO👌💪💪

[@BMACVAGS]

I would say the gear selector or linkage

[@user-dn6qy1ou1f]

Dude I wish you were over here in the states. Your videos helped me when I got into TDIs. I have 2 2001 TDIs. (Golf & Jetta) and a 82 diesel rabbit I'm TDI swapping at the moment

[@Primo150]

Would it fit on Skoda Octavia mk1?

[@bdog840]

I'd have too say a VW Jetta mk5 shifter knob feels way better than the golf ball mk4 shifter knob for people with big hands.

[@jarr5648]

How about that hole plastic deal dats under the shitter that wraps around? I broke while trying to get under the ashtray and lighter. Where can I get that?

[@user-dn6qy1ou1f]

It's just a plastic sleeve.

[@FCT8306onTwoWheels]

I love ECS Tuning

[@bacaluiry929]

nice job thx

[@tomkendrickii]

THANK YOU!

[@MrJustrebel]

How do I install just the top gear Knob?

[@eyurtese]

If you look carefully at about 1:55. You can see that the replacement knob does not fit properly. The gear stick has special surface to get better grib (the original knob had perfect contact). It will not be as tight as original and it can get out. I wouldn't buy this part as replacement.

[@user-dn6qy1ou1f]

He didn't have it far enough down. That's it.

[@brickcity9mm896]

As you were corrected, he didn't have it in all the way you dipstick😂😂

[@Valcone89]

where can i replace the brass clip ?

[@jarr5648]

Cool I needed that lol

[@TuneMyEuro]

Who sells it for $125? That's crazy.

[@s.schwarz4864]

*… i thank YOUUUU!!!!!*

[@valentinfaurescu9584]

you should do something about that door panel; it looks terrible!

[@bdog840]

VW used some type of rubberized coating on the door panels and the dash that peels off over time and you get wear marks.

[@blanariucosmin5219]

hey can you make a video to how to change the armrest, not the entire console just the armrest

[@user-dn6qy1ou1f]

Why. They all break. Ive literally seen one that hasn't broken before 100k miles

[@lucliskova]

thanks

[@Chuck_72]

I like It

[@Killerame88]

not at all because the owner could of just change the shift knob and look like the car has not been beaten up when in reality it has.. I suggest taking the car to a garage and have it checked out. its worth the money trust me

[@twane061]

yes it will be good. :)

[@Faraonqa]

For some reason my shift know doesnt have those clips and is wider....

[@brandonianson9210]

I bought a similar knob and boot and went to fit it today however mine was totally different and its a 2001 and mrk 4 v golf. mine has a screw at the top with a little rubber clear protector and long black plastic covering that has a spring under, this is used to slot the car into reverse as it sits under first which presume everyone elses does aswell. so my point is that because of this plastic fitting the opening is much wider and does fit with this plastic thing on top but without it it doesn't work because I cant get the car into reverse so I don't know if I need a different type of fitting or if I'm missing something. anyone else with the same problem ands or a solution. help would be very much appreciated! thanks

[@TuneMyEuro]

I'm going to guess you live outside of the USA, likely Australia?

[@brandonianson9210]

I do yes but I did buy the part off an Australian website!! Anyway do you know where I can get one that fits my car??

[@user-dn6qy1ou1f]

@@TuneMyEuro my car is the same and I'm in the USA

[@illskill3]

what if i want a different brand boot and knob?

[@user-dn6qy1ou1f]

Then change them

[@sikacuu]

I use this on golf 3

[@petewalker6663]

ok apart from the damn pop up on bottom right covering part of removal process !

[@travisthuvu]

hey rodriguez, could you please make a DIY clutch change on a vr6 12v mk4 gti?

[@user-dn6qy1ou1f]

For anyone doing a clutch change, replace everything including all bolts. And go to a single mass flywheel. It will rattle, but they are far superior than any dual mass flywheel. And don't break!

[@fikretpolat65]

Güzel👍

[@scotty2036]

👌

[@84marcelors]

nice...

[@mixwb]

Why does your car have a camo paint underneath the shift boot?

[@thomassteeves4405]

mixwb its foam lmao

[@mixwb]

Never seen that before lmao

[@TuneMyEuro]

I don't know, sorry

[@elmanssouriazizzayani8781]

Merci

[@Pkwic]

So how to replace just the shift boot?

[@user-dn6qy1ou1f]

Pull the boot off

[@rzorNvme]

I don't want to be a jerk but ECS tuning has the exact same one for $48. What with the $125 not cool.

[@zibi5490]

wrong :) new clips should be squized 2 cm lower :) Is it same techniqe with Ford S-max 2006 ?

[@anaszouhair9662]

Qui bien

[@domenicaalmeida2067]

En español fuera exelente

[@SuperGator69]

I bet the stock part is $450 at the dealer...

[@iKearGunz]

is that rlly mk4?

[@TuneMyEuro]

Yes it is, a 2004 Golf TDI

[@iKearGunz]

FixMyVW.com by AARodriguez so he converted his car seat to leather? Is that possible damn?

[@TuneMyEuro]

iKearGunz Eh, no, that's a tan cloth seat

[@austio951]

my mk4 came with leather stock

[@user-dn6qy1ou1f]

@@austio951 mine to. Heated black leather with a moon roof. Do people not know they offered I believe 5 trim packages for these cars. And I believe 4 different sets of rims. And 4 engines and I believe 4 different transmissions

[@douglax2248]

Outdated subject, they don’t sell them

[@aithjawcraig9876]

Annoying that I need to go out and purchase a specific tool for that clamp. 🙄

[@christellebegue3496]

Goglo gti dilzi

[@FirstGendodgegarage]

calling things a nipper could be offensive to asian people