DIY Indoor Ninja Obstacle Course

[@totalmenteforadopadrao]

You are good father. Kids will remember when you be grandfather amd make for their kids

[@WhatWeDid365]

Thanks, appreciate the kind comment!

[@sondradee3191]

I’m thinking of adding this to my garage gym for the grandkids- I started off looking for just a climbing wall and u have inspired me!

[@seriouscontract4262]

You were my inspiration to build something similar in my basement. I copied everything you showed here down to the nut and the washers. My kids love it and it’s their only activity in this Canadian winter. ❄️

[@WhatWeDid365]

Thanks, appreciate that!! Hope they get lots of use out of it...which I'm sure they will as ours still use it all the time!

[@newbian9022]

Trying to find a video for an apartment friendly version 😊

[@inderjit9691]

Can you please make a video about how you have your kid's slide area setup? or share pictures of the area via emaill?

[@WhatWeDid365]

@@inderjit9691 thanks for the comment…I’ll make a video of the slide area and get it posted next weekend.

[@inderjit9691]

@@WhatWeDid365 thank you.

[@WhatWeDid365]

@@inderjit9691 did that video of the slide help or do you have other questions?

[@Serious9185]

Thank you so much for giving me ideas.

[@remya4000]

This is amazing. Donyiu mind giving the link for the ninja one and the bkue one please?

[@WhatWeDid365]

Hi Remya...the links are in the description at the top...thanks!

[@kelseydye8087]

Hello. Awesome set up. We are thinking of doing something similar in a 12x12 room. About how large is this area? Thank you!

[@WhatWeDid365]

Thanks...they're hanging in a 10' wide x about 12'...you should be able to make that happen.

[@ndusa07]

Any reason those obstacles are not directly hang from the joist, while carefully checking your video they are all hanging from additional 2X4 stud screwed to the floor joist?

[@WhatWeDid365]

I ended up using the 2x4's screwed to the floor joist so I could use the bolts with washers and for certain spacing of the obstacles. So far so good with nothing falling so far!

[@ndusa07]

Thanks @@WhatWeDid365 for your feedback, 2 x 4 are screwed to the joist assume at each obstacle spacing. Further to screw the stud what screws need to be used and can that 2 x 4 stud be directly screwed on the bottom flage of the I joist of the basement ceiling? Appreciate for your comments and guidance

[@WhatWeDid365]

@@ndusa07 I used 4 - 4” screws for each of the 2x4’s…with the exception of the longer board that has 2-4” screws at each floor joist location.

[@ndusa07]

Thanks however construction screws not working for our 2×4

[@ndusa07]

@@WhatWeDid365 as said earlier construction screws #10 x 3-1/2" didn't work for us with 2 X 6 stud. Email you too, do advise with your comments. Thanks

[@reginamagsino3839]

Until how old? Trying to convince the hubby to make one for our little guy. 😂

[@WhatWeDid365]

Our kiddos are 9 and almost 8 and still use it with their friends. I suspect I've got a couple more years with it.

[@priyap3]

Can you show the slide? Was it diy?

[@WhatWeDid365]

Yes, it’s just one of those wavy plastic slides. I found it on Facebook marketplace and it was perfect for a height between floors. Two screws at the top that screws into the landing with 3” lag bolts.