DIY LED Exposure Unit for Screen Printing

[@strikeupscreenprinting]

what kind of led strip are you using

[@LineTableScreenPrinting]

www.amazon.com/gp/product/B07WG75NDR/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

[@hudekhoustonartist]

Do those lights have the proper UV light spectrum? In other words...how well did this exposure light box work?

[@LineTableScreenPrinting]

kzbin.info/www/bejne/g6KqlZSdZaZgrrc Issue was found and corrected: kzbin.infocommunity

[@nipunsharma8209]

Superb 👍... & for the dark room can we use small yellow light bulb...

[@LineTableScreenPrinting]

Yes you can. Thanks.

[@afshinzamani9305]

Nice video. Could you tell me what is the material of the top vacuum film used? It should be a stretchable silicone film I guess.

[@LineTableScreenPrinting]

You mean the vacuum exposure blanket? I just used rubber pond liner like this. And it works fine: www.amazon.com/Firestone-PondGard-EPDM-Pond-Liner/dp/B004GX1HN6/ref=sr_1_16?crid=16ZN98XUWLUMX&dchild=1&keywords=rubber+pond+liner&qid=1629941772&s=lawn-garden&sprefix=rubber+pond+%2Clawngarden%2C208&sr=1-16 But Neoprene may be the better choice: www.amazon.com/Vacuum-Exposure-Unit-Neoprene-Blanket/dp/B08Y647D77/ref=asc_df_B08Y647D77/?tag=hyprod-20&linkCode=df0&hvadid=507844280054&hvpos=&hvnetw=g&hvrand=13861274471476128842&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9032025&hvtargid=pla-1269248419808&psc=1

[@afshinzamani9305]

@@LineTableScreenPrinting That is really good. I found out that in the commercial light boxes they are using 3 mm neoprene fabric which is a bit expensive. I will use yours. Thanks buddy.

[@strikeupscreenprinting]

How many watts of adapter are you using? Cause i make 25 led 1 line but i dont bright...do you have a solution?

[@LineTableScreenPrinting]

I use 2 adapters for each half. More adapter is better. Please read my post in COMMUNITY section. If adapter is weak, there will be "blinking lights" issue.

[@grailzmachinescreenprintin3932]

So you used 2 DC adapters that are 12v 2A ? Is that correct?

[@JowfeStudio]

HI. THERE WHICH ONE IS THE BEST TUBULAR FLUORESCENT OR LED FOR DIY EXPOSURE UNIT SCREEN PRINTING?

[@LineTableScreenPrinting]

LED.

[@buildonbudgetph4662]

Is it possible to connect the strands parallel to each other to avoid voltage drop and obtain more light?

[@LineTableScreenPrinting]

I connected + to + and - to -. Isn't this parallel? I'm not sure... kzbin.info/www/bejne/oZevamSGoLqjhbc I think volatage problem is caused by the adapter.

[@HelmetVanga]

There was a little gap top part as if light was missing

[@LineTableScreenPrinting]

Sorry. maybe I missed there.

[@Дмитрий-в4в4у]

hello can you make a flash dryer?

[@LineTableScreenPrinting]

I don't think I can. Besides, the heating element part is almost as expensive as the whole flash dryer...