DIY LOGITECH HUB SPACER AND EXTENDER

Tutorial on how to make and install a Logitech hub extender or spacer that will allow adding of indicators or other accessories on the G29, G920 or G27 wheel base for ets2 or other simulator
PARTS
Hub extender - bit.ly/2MCltNT
Bolts ebay.to/2Rz6Tel
Nuts eBay ebay.us/cxSnOX
Wiring Plug 7pin ebay.us/hO0WV2
This site contains affiliate links for which I may be compensated
DIY How to- Indicator Video : • DIY TRUCK SIM LIGHT AN...
TOOLS
Wire Cutters BG goo.gl/ja3HWb
Wire Strippers goo.gl/4PFXny
Soldering Iron Cheap DX goo.gl/T3CRNq or goo.gl/Ahq8e2
My Soldering Iron eBay ebay.us/M0GSif
Solder DX goo.gl/gZZjvP BG goo.gl/Ni6n4P
Heat Proof Mat BG goo.gl/YCuQJG
Solder Wick BG bit.ly/2K9iHgz
Micro Screw Driver bit.ly/2C3Ppx8
3D Printer goo.gl/E8uS76
Thank you for watching, all comments are welcome.
Big thanks to all Patreons for their support and
Special mention to Marcus for the testing the parts.
/ amstudio
Want a tutorial or project built, leave suggestions in the comments.
Share the video with a friend who would like this!
AMSTUDIO channel for other DIY videos and project playlists.
/ @amstudioprojects
MY SIM SETUP
Fanatec CSW 2.5 Wheel base
Fanatec F1 carbon, BMW, Universal Hub, McLaren wheel
Fanatec CS V3 Pedals
Fanatec Handbrake V1.5
Fanatec H pattern + Sequential Shifter V1.5
Fanatec Rennsport V2 cockpit
Amstudio DIY Button BOX • MAKE THIS BUTTON BOX |...
Sparco Seat ebay.us/ySAhIs
Get Fanatec here: www.fanatec.co...
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
© AMSTUDIO 2019 All Rights Reserved.

[@marcushesketh5822]

It’s awesome you still do mods for the g29

[@wepootheuser]

You make the most clear and concise DIY videos of anything I've even seen. Thanks.

[@reiisbrunoo]

great video! I hope one day to see him make a hydraulic hand brake with pressure sensor, it would be very rewarding and would help many who dream about it. Waiting for the next video, I do not lose any video of you :D

[@quawkertheduck1555]

This video is going to lead to other great logitech Videos. Keep up your excellent work!

[@crazyferonie]

Nice one! 👍 Next DIY how to make a simhub display from an old (Satnav) (GPS) (Navigation System ) The one that you can stick on a window!

[@DCtropical]

Analog paddle clutch f1 style pleease!

[@프레디khjfreddy]

DCtropical C TOTALLY!!! Just like the fanatec podium paddle module but just the clutch so that we can attach it to any wheel rims

[@DCtropical]

@@프레디khjfreddy yes, I really need it for the smoothest off the line start

[@Tiger_Tisen]

Nice video! Underrated channel

[@mac-racing3107]

Nice job pal! The community had too tank u so much ! Cheers from Brazil!

[@your_average_cultured_dude]

Nice. Good video. No bs rambling for 10 minutes. Dropped a like.

[@piotrwadoowski1280]

Really awesome stuff, just strated Sim Racing with my G290 but I'm going to mod it soon.

[@kkyoto_prod]

What mods have you done yo it cause i want to mod my g29

[@piotrwadoowski1280]

@@kkyoto_prod I had custom wheel with display, extender, shift paddles with additional magnets to improve the click and modified floor pedals with custom sprigs. Currently moved to fanatec setup - cost is higher but I think it's worth it if you simrace seriously.

[@broken1965]

You have mad skills bro now i want one for Thrustmaster pc racer lol

[@seanohutton3185]

HOLY... WHAT!?!... You Actually Did It!... And I Thought You Gave Up.... I'm excited to be able to have this with the switch bracket!

[@MRSPORTYTRUCKER]

This works with the custom wheel mod u did right? or am i just being dumb because the bolt hole and placement looks different.

[@ruvas8451]

Works on my G25!!! Beautiful!!!

[@aaron_5349]

If it works for you, it will work for my g27? Thanks!

[@ruvas8451]

It should work. In my case, the hub was a little bit tight.

[@stringerfilms.]

@@ruvas8451 lol how do you get this thing on here??? Do I need to file down the spacer or do anything in particular to the piece extruding from the LG base?

[@hakescrew646]

That's what I'd use it on as well! I assume the paddles would move along with the wheel too? (I'd use this on an arcade cabinet to keep only the wheel/paddles visible and not the casing of the unit itself.

[@alwayneangus5479]

Can you do your next video on how to attach the indicator controls

[@MRSPORTYTRUCKER]

alwayne angus hot glue

[@ravey1981]

@amstudio would you be able to make a magnetic mod for the g27 29 paddles? Something printed that screws to the side of the hub to hold magnet would work. I really need to get a 3d printer....

[@ruvas8451]

Amstudio could you tell me if this hub spacer and extender works on logitech G25? Thank you

[@Elioncars]

yes it does

[@spoopy2972]

Any chance you know what each of those wires does that go to the main board? I'm trying to see if i can steal buttons signals through them and it would be big help if you knew.

[@brandonhead13]

I have a question. I’m very interested in this product, but unfortunately I don't have access to a 3D printer. How would I go about buying this with the cable extension. I have the DFGT..I live in the U.S...and Im making a serious inquiry. Help me out or point me in the right direction please. Thanks for the videos..as it was your channel that got me started on the possibility of modding and customizing equipment...and I'm hooked. Thanks again

[@martinsch62]

Nice work as always

[@hakescrew646]

This is awesome! I would use this to install my Logitech wheel into an arcade cabinet! Just need someone to print it for me...

[@umutdegismen]

Great job again! Which 3d program do u use for designing ?

[@tolley3990]

I think its Fusion 360

[@mattiejonesmusic117]

Any chance you could do a project of rehousing all the circuits and buttons from the Logitech wheel onto an aluminium based F1 style wheel that will still fit on the standard wheel base?

[@jobarchuleta]

Will you ever do stuff for thrust master

[@amstudioprojects]

Yes

[@jobarchuleta]

amstudio thanks that would be cool keep up the good work

[@olivers8516]

Doing any of you know how to get the rsb and lsb keys to do something? Edit: If they even do something

[@ivanbacca1978]

great projects, congratulations ...

[@GuidoGoyaBeans]

It's like you make anything possible

[@MrSabifa]

Any new information on magnetic shift upgrade for fanatec formula wheels? Great vid btw!

[@jimkor81]

Hello great videos and ideas !!! Is this hub extender the same for the g27 i have??

[@sameezls]

Another awesome vid by amsudio

[@lifeofasimrigmestizo6910]

Long time no see homeboy, great video.

[@ajiyra1188]

Improve paddle feel for g29?

[@JuvenylAssassin]

Do you know when the indicator stalk would come for the Logitech without a spacer? anyway fantastic video like always.

[@LeeTaylorTV]

Would it be possible to make the actual wheel it's self USB from the circuit board 🤔 like with logitech pedals, disconnected from the wheel base?

[@azherlan777]

Which material work best (abs, nylon) tht satisfactory to withstand the wheel force feedback?

[@superCJ126loquendo]

this desing could be apply to a quick release system? my idea is to apply a quick release instead of the extender soy the weel can be detached?

[@MintJoker9578]

Same idea but I think if we change the 7 pins connector to a similar 7pins that use on the t300rs one will be more easy and use the similar design on the custom quick release for the t300rs

[@carrotshooter2222]

Challenge: DIY Direct Drive wheel

[@theeziojump]

you are a genius

[@black_yeti]

How long have you been using the g29

[@Griseb4nk]

assassin stunter i think he is using a Fanatec wheel now

[@joaojorge2744]

Você vende suas peças em algum lado para Portugal?

[@angryskeleton5359]

Thank you this helped me so much Said no one

[@vapour_cs658]

can the extender be made for any size? i was thinking of making a daytona style cockpit with dials behind the wheel and it wouldnt all fit behind there

[@DCtropical]

Also can you make a spacer for fanatec wheels

[@Crafftyyy]

dude we need a store so bad.

[@leworeczny97]

Design QR adapter like this for original wheel with buttons and shifters.

[@bigchew3149]

Sweet...

[@santiagobecerra9395]

hello, i hace printed the model but i jace a problem, Can you tell me the exactly reference of wiring plug ? I have bought a Jst 7pin plug but its different, and does not work

[@currymilch]

nice video! Do you ever had the problem that the G920 has given a signal to the pc although you haven't push a button? When I'm turning the wheel my engine turns off ingame, I use A Button for this

[@konrad6r]

You have damaged wires. Wires which go to your steering wheel PCB. You must change them. You need JST 2.0 PH 7-Pin Connector with wires cables 26AWG. You can buy 10 Sets on Aliexpress. Better, thicker wires...

[@konrad6r]

10 Sets 7P

[@JonahHax]

the wire going from the wheel to the print is damaged. Logitech in all their wisdom decided to use shrink tube on the whole lenght of the wire, so that they can't flex properly when you turn the wheel. This will snap the wires inside the shrink tube over time.

[@cristianopereira5690]

good video

[@Alex_Z95]

And how do you mount the levers on the wheel? Where do you find them??

[@alb4030]

Hello, is it possible to get an adaptar or extender for a real car wheel? Example a bmw wheel or so?

[@jackliddy4540]

Follow up indicator vid !! Please

[@yusuf.agcadag]

Hi. I'm from Turkey and i want to this HUB Extender model file. I dont have much money. How can i get it this parts 3d model?

[@maxk.7585]

what kind of material is this extender made of?

[@michaeltyers7336]

What pin spacing are the JST connectors?

[@mrchevyblue]

a bit late... where can I find that box to install the lever?

[@DexBerry]

Can you teach us how to make steering wheel from printer encoder and arduino uno...only the steering

[@Joragu]

Can you attach multiple extensions? I want to replace an original arcade wheel and the shaft needs to be longer

[@kungfooman]

Same question, did you figure it out? Too bad OP doesn't reply anything...

[@andyimbrogno6900]

How durable is this i printed one but the m4 screws came out after 5 mins of use.

[@andyimbrogno6900]

Not durable at all I tried it several times

[@davedavedave69]

Have you done any mods to your g29?

[@ricardosantossantossilva2331]

a happy New year to you okay 👍! Kiss for you!🇧🇷.

[@ricardosantossantossilva2331]

Thanks 🇧🇷!

[@dr4rodas]

tu comprou Ricardo?

[@CRegent90]

I was trying to do the pedal adapter but the sketch does't seem to be on your github. only the shifter adapter and a few others. pls help.

[@alessandroleleu1123]

Little to 100k \o/

[@amstudioprojects]

Getting close!

[@RR_Redrock]

Hi! I do not understand. I bought the spacer I printed. I put it together and the government is not centered

[@stoneykeviin4185]

But how do you mount something there ?

[@stoneykeviin4185]

Nice ! But could you do a DIY Wheel for "The poor guys"?

[@itchie]

will this work on g25??

[@meister_harris5623]

I have a g29 myself and going to make the blinker/turn signal mod but have a slight problem, there is nowhere to attach the casing to the wheel. Would anyone recommend a way to get it securely on the wheel? Drilling holes? Velcro straps?

[@twinkletoes8984]

I would say the best way is to screw it on the case but you need to be careful where, as you may damage the internal components

[@meister_harris5623]

Twinkle Toes that’s what I was worried about, I’m not too sure where all the components are in the casing of the wheel and I don’t want to open the casing a risk breaking the wheel

[@twinkletoes8984]

@@meister_harris5623 Well, the video uploaded does have a g29 teardown video if you scroll down his uploads list a bit, you should try taking a look at that

[@matyasjdm8053]

¡¡¡😎 Wow new video 😎!!

[@lokmanfreeman]

amazing =D

[@dhanikraayenhof3692]

Does this work on the logitech g25??

[@h3gi653]

I want to Know this too....

[@Vilterleno]

Please make clutch for logitech driving force gt

[@erenboz7327]

pls diy streering whell

[@dj-king1208]

Maby you or I can find a way to combine this with a quick release system🤔

[@Kristian_6576]

What is the plug: 1.25 or 2

[@gamingwithredwan5013]

Make a video on how to put a real car wheel (normal car not race car) on g920 please?

[@Oscar-xt8fh]

en que tipo de archivos se entrega ???

[@VuaizakuMedia]

My back hub assembly is spoilt how can I replace it

[@navill4181]

Me too do you know where can I get a new one ?

[@gabrielrorato6978]

Show!!!

[@ahmadkhero5402]

can you please upload the 3D file?

[@laurynaspa5167]

I thought that the Logitech g29 is good wheel. After 3 days having issues with paddle shifter. :(

[@СмотрюЮтюб]

Can you make this for me

[@Foldingblade]

And a quick release?

[@tinosjogren3663]

What about G920

[@marcuserck2159]

It will work with the G920 as well!

[@الفتىالمجنون-ز7ق]

g920

[@manny2play325]

Are for sale? Trust me it's hard to do it bymyself

[@KnowerofThings]

wobble amplifier

[@limyuewei8832]

How many g29 you have?😂😂

[@jordz2893]

First

[@regardedogsregardedogs9305]

the scavengers Fuck

[@haciro7604]

I want to buy your button plate model by transfer Because pinshape is scam

[@amstudioprojects]

Send me an email with your request

[@haciro7604]

@@amstudioprojects take me your e-mail?