DIY M-chassis RWD RC Drift Car (First active rear suspension）- Tamiya MX5

[@WalldoTheWInner]

The suspension tuning make it seem so realistic. Awesome car

[@monkeypoo57]

By far the best looking chassis set up I’ve ever seen

[@boerharms2209]

Wow! that looks so realistic! Super impressive job!

[@MannfredP1980]

That is so cool, I love the body roll, very realistic.

[@fengrc]

thanks~

[@ll1l2l1l2lll]

The body roll is great

[@fengrc]

thanks

[@pascalfritz4770]

feng@rc is it just soft suspension?

[@bmx2026]

@@pascalfritz4770 Im curious as well.

[@magnuswf]

@@pascalfritz4770 You can see a servo in the back, which i guess is hooked up to the gyro and tilting the rear suspension

[@allanjohnsen1034]

Oh my god that is cool !!! wow ... 😎🔥

[@theuntouchables808]

that looks awesome . body roll looks amazing .

[@potatosantitizer5901]

u are smart AF

[@rcXmartin]

Love your bobble head Willy! I'm going to copy that one for sure!

[@fengrc]

haha i am not the first one so be my guest :)

[@MusicRCBicyclesCoffee]

I love this build!

[@NemzieDaMonkii]

super fxcking awesome body roll // and amazing project to make D4 M-chassis run this great!!!

[@fengrc]

thank you!

[@FuriousFilipino]

Ingenius use of a servo to make the car lean! Is the lean servo connected to the steering system/gyro?

[@fengrc]

nope, it use an independent gyro, you can also connect this gyro to ch4, for adjustment

[@muhammadtaufikkuncoro8169]

Independent gyro...it mean you used 2 gyro ? And 1 gyro conect to ch4...

[@vwgetto]

Congrats man love it , is there a way for you to make another One or Sell the One you have ???

[@westsidej2k]

I WAS WONDERING IF YOU CAN UPLOAD HOW YOU DID THE REAR SUSPENSION FOR THE ROLL

[@DriftAddicted]

3:05 that's exactly the face i made , that part was so good it looked like a mirror

[@fengrc]

haha , well exactly it's kinda like a mistake because the chaser is a little bit ahead of the leader XD

[@DriftAddicted]

your car is actually my favorite rc drift car of all time. the way the whole body goes to the right and left when you go side ways, its so realistic, and beautiful. what that called?cuz im planning on buying a sakura d4 with 8.5t brushless motor and some d spec drift wheels and tyres . and i want to know how can i make my car get thrown like yours when it slides.

[@fengrc]

is it called the body roll? the secret is all in this video, i use a servo to control the rear suspension, you need to try to fix the servo to the chassis

[@hoyiu8774]

Greetings from Hong Kong !!!!

[@fengrc]

HELLO!

[@robekensugi]

Wow ! Fantastic Job !

[@fengrc]

thank you ! always watch your channel :)

[@ayamdasi]

what wheels do you use? it looks awesome

[@jleung3863]

想知道更多这个主动悬挂的细节

[@babasanvictores5189]

What is the paint?

[@crown_vicdude6690]

What type of chassis did you use? I’m asking because the m series chassis are front wheel drive

[@bochup17]

Hi what rim and tyres is this

[@rylancromer1994]

What scale is it

[@matsudarx8]

Good afternoon feng@rc, may I ask where to get the parts that u use to hold down the body to the chassis? I only recognise the black dual lock fasteners. Can u shed some light on the metal portion? I am mounting the mx5 body to a sakura m-chassis. Like that invisible look very much. Thanks.

[@wtfbc]

めちゃくちゃロールするじゃねぇか！かっけぇ！

[@fengrc]

a ri ga tou! have to ask my friend who knows Japanese to translate for me :)

[@wtfbc]

feng@rc Very cool! The car is rolling and it is pretty cool! is what it means!

[@fengrc]

haha ! i knew it because i mean my friend have already translated this for me! thanks again

[@ryanli442]

cool build !!

[@laNotaStonata]

A M A Z I N G !!!!!!!!!

[@fengrc]

thanks

[@hafizmalik2466]

how much its weight? im figuring out to make that suspension to d5

[@RainbowDash-sy7wo]

awesome, looks great ^^

[@fengrc]

thank you!

[@tomwright943]

Very nice👍

[@Gwirisarius]

Just.... Waw ! amazing work ! :-)

[@fengrc]

thanks

[@mlzerog8417]

你好 feng 想请问你这部车是用 m chassis的轮款 还是 普通1/10的 ？

[@sophie28ize]

Good driving!!

[@fengrc]

thank u!

[@michaelandradejr]

awesome video man very cool set up ! is there any rocket bunny kits you would put on the mx5 just curious im stoked to on road now lol

[@fengrc]

i saw other tamiya's mx-5 with wide body but not sure if it's rocket bunny's

[@Jaruso13]

Good job, looks awesome! I was looking for RWD, narrow chassis for this body...

[@fengrc]

try XPRESSO M1 or DIY

[@Jaruso13]

Thanks.

[@rudirudi-on3fr]

thanks a lot ..

[@willi19671]

Nice looking driver !!!! What tamiya colour code is the Miata ?

[@fengrc]

hi i use PS15->PS12->PS5

[@tongology5301]

Simply awesome! Can i know what did you do for the head and rear lights please?

[@fengrc]

hi thanks, i used EL wire(Electroluminescent), and be careful cause it's high voltage

[@tongology5301]

Thank you! Would you know if there are any compatible led buckets that i can use instead?

[@fengrc]

this tamiya body didn't come with a light bucket. I am using the tamiya s15's light bucket on this body,but i have to cut a lot to fit it and as the result i would say only better than nothing.

[@tongology5301]

Thank you once again! I keep watching your video again and again!

[@tongology5301]

Watching this again! Haha.. It's too good!

[@spicy-tablet9872]

when you drift do you have to play the handbrake yourself or does it automatically drift when you turn

[@rodycheung]

豐大大你好！你的MX5真的帥呆了！請問底板及二樓板來自那品牌？我也想造一輛！^_^

[@fengrc]

你好，底盘二楼版都是自己用CAD绘图设计的

[@Rx0zElite]

M-chassis wheels or regular 1/10?

[@fengrc]

regular, a little bit big for a M chassis car, but you can choose many different offsets.

[@hunnieluv100]

Where did you get that belt drive spur & pinion or was that custom aswell?

[@fengrc]

hi, they are both from 3r-racing, but you'll need to modify a little bit

[@markberenbrok627]

how does someone get one of these.... is it for sale or just a one off bild

[@fengrc]

make it yourself

[@olivierhabex8486]

Wheelbase of the D4 is 255mm, but the Tamiya miata body has a 225 wheelbase? How did you fit it? Of is the body from a other brand?

[@fengrc]

this body is from TAMIYA and it's 225 wheelbase and width is 160mm. i basically redesign the whole chassis to fit in.

[@carloscastrol6518]

Hello what paintd did you use for the mx5 body, im curious on how to paint the convertible top, hope you can help me!

[@fengrc]

PS15->PS12->PS5 ,for the convertible top,you 'll need to use PS55 spray from the outside. :)

[@chrisyip3275]

is it a custom made chassi or using which brand car?

[@fengrc]

base on sakura's d4 and custom chassis

[@chrisyip3275]

feng@rc nice!!!

[@hunnieluv100]

Is the chassis based on the Tamiya M05 MX5's wheelbase and the sakura drivetrain? And did you use 2 gyros or 1?

[@jamandpot]

Awesome mate, super creative and hands on!! By the way, what suspension arm did u used?

[@fengrc]

upper front - D4,lower front - usukani,upper rear - d4,lower rear - MST

[@jamandpot]

quality info!!

[@lar2028]

Amazing Im building a rc drift but Im a beginner so any tips?

[@fengrc]

get a decent transmitter and a fast servo and a good chassis (like yokomo yd2)

[@lar2028]

feng@rc thanks man do u think is a good buy the sakura d3 sport?

[@fengrc]

i won't recommend the sakura d3 because it's 4wd, old design, no good for newbies

[@lar2028]

feng@rc thanks man Im going to buy the rwd d4 ;]

[@paulobumaye6425]

Wicked!

[@fengrc]

XD

[@rudirudi-on3fr]

its magic, could i build this RC like yours? thanks

[@fengrc]

no problem man,just do it

[@greensoundroom]

Very cool build! What model is your RC? Custom build? Can I buy one from you? : > )

[@fengrc]

its a custom build, based on sakura D4

[@greensoundroom]

feng@rc Are you interested selling yours? Or i am willing to pay you to build another one☝🏻 I’m appreciated your custom build is so clean and neat! I want to pickup drifting RC again.

[@002-y5e]

Taiwan No.1

[@fengrc]

always NO.1

[@takeshi_r3235]

說中文的嗎

[@jamiewatkiss201]

Hi, great project, I've just built a short wheelbase d4 (185mm) what was the main reason you put the servo on the rear?

[@fengrc]

for the body roll :)

[@tac4sei5]

awesome, nice driving nice car. What music is this?

[@KIRIN-]

I am Japanese. I wrote it using the Japanese translation application. I also want to make the same thing!Can I refer to it?

[@fengrc]

no problem

[@KIRIN-]

feng@rc thanks!

[@mattlui977]

以為柳州只有棺材出名，現在多了一樣

[@fengrc]

哈哈老乡？

[@mattlui977]

feng@rc 不是啦，我香港人，愛漂移不分国界

[@fengrc]

哈哈sorry, yes drift is life :)

[@jtech7357]

can you help me with my school rc project

[@fengrc]

sorry i don't think i can....

[@jtech7357]

okay

[@jimmywu8674]

哇嗚...蘇州昆山這都沒人在玩..

[@fengrc]

上RCFANS找下车友咯