DIY, Magnetic Drill Press From Scratch Shock Absorber and Flywheel

[@fadhilseptiawan2476]

This press has worked like a charm for my projects kzbin.infoUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!

[@mariusweber7887]

100% for your efforts, wish you all of the best for the future of your shop.

[@mr.ranyhomemade2466]

Thank you for your comments It work very good but I should be find out a motor have speed remote control.

[@javierdelvalle4291]

Excellent job!!! Cheers!!!

[@mr.ranyhomemade2466]

Thanks for the time to watch in this video I hope you like more

[@mohammedkamal9838]

Fantastic Good welding Accurate work

[@mr.ranyhomemade2466]

Thanks for your best time

[@mohammedkamal9838]

@@mr.ranyhomemade2466 ❤️❤️

[@bernardhill1622]

Well done..❗👏🏻👍🏻 Thank you..❗🙇‍♂️🇿🇦

[@mr.ranyhomemade2466]

Thank you

[@JoseJose-ht9mj]

Hola quiero reconocer la gran persona que eres al compartir tu experiencia con una excelente explicación te felicito y te dejó saber primero Dios pronto estaré en mi país natal México voy a intentar ASER un taladro como el tuyo Dios te bendiga

[@mardyseanofficial9502]

Very beautiful Film and great work, brother. You are going to make thing happen more and more. Keep, brother. Thank you for sharing.

[@mr.ranyhomemade2466]

Thanks for sharing your comment. I will try the best if I can thanks

[@mrohny76]

świetna robota 👍👍

[@javiermorales2020]

Buena idea y realización, pero muy poca altura....

[@GBWM_CNC]

I see big improvement in your filming skills. Great video!

[@mr.ranyhomemade2466]

Thanks my friend you too Is not an easy way to film and make tools I did alone an equipment take so many day. Thanks again

[@wibolstudioofficial6270]

Wonderful Job ❤️ ❤️ ❤️ ❤️ ❤️ ❤️ ❤️

[@mr.ranyhomemade2466]

Thanks brother I will try more if I can

[@biharibabualive]

Make high precision 90⁰ drill press using shock absorber

[@mr.ranyhomemade2466]

It work my friend but a bit weight. I just one part of my diy and it help me a lots. Now I’m going to finish homemade lathe soon then my next step is maybe CNC machine if possible. Thanks

[@StillOnSteel]

Well done! I'm very impressed! Keep up the great work!

[@mr.ranyhomemade2466]

Thanks for your comment hope you are enjoying

[@piwengema4534]

Wonderful job you did ,thanks for sharing Will you share the link for those magnets,where to find them

[@mr.ranyhomemade2466]

To be honest thanks for your best time watching.

[@Biokemist-o3k]

I found it. Thank you my friend!! Is this what you use to do the rails with the big grinding wheel? Thank you This is amazing!!!!

[@mr.ranyhomemade2466]

thanks for your best time I do hope you enjoyed my homemade, I will try my best if possible and improve more. I don't have any good gear and rails so I decided to use a scratch flywheel. It is not bad if we don't a choice.

[@Biokemist-o3k]

@@mr.ranyhomemade2466 Excellent! the other drill that you use connected top the grinder. How was that made? Was that the same as the magnetic base drill? The blue magnetic base drill is wonderful. I have a very expensive magnetic drill that I found from a business that was closing. I need to make a grinder setup like yours to prepare rails the way you did.Thank you my friend.

[@mr.ranyhomemade2466]

Thanks, I'm not good to answer because I'm not sure to know tools' names it working well but two happened are weight because the shock absorber and magnetic pieces are a bit small in size. When I use big drill bit and thick metal sometime not that good. But no choice so happy use it

[@Biokemist-o3k]

@@mr.ranyhomemade2466 Thank you!!

[@homemadetools]

Nice job. We shared this video on our homemade tools forum this week 😎

[@waldeczekPierszy]

super wiertarka . sam kiedyś taka chce zrobić . pozdrawiam

[@ÁREAJ27]

Olá meu amigo parabéns pelo projeto, muito útil e muito bem feito!!! Grande abraço e boa sorte sempre!!!

[@mr.ranyhomemade2466]

Thanks for sharing comments about

[@biharibabualive]

Provide a blueprint of your first drill press please 😢😢😢

[@biharibabualive]

Please provide a blueprint please 😊

[@biharibabualive]

How it's perfect 90⁰😅

[@МирзоШоев-и6ч]

👍🇹🇯

[@mr.ranyhomemade2466]

Thanks for your watching

[@devilvortex1]

add a spring

[@hernandotatis1302]

made with a pair of " socks "

[@mr.ranyhomemade2466]

Thanks it worked nicely But I ordered wrong magnet