DiY MAKING A SIMPLE PLYWOOD & TUBULAR FRAME DOOR | low-cost

INEXPENSIVE PLYWOOD & TUBULAR STEEL DOOR. DIY DOOR.
The design and arrangement of door frame is based on available plywood material.
Paggawa ng tubular at plywood na pintuan. Presyo at kung anong materyales ang ginamit sa pintong ito ay nasa video. Low budget na pintuan.
OTHER VIDEO RELATED TO MAKING THIS DOOR:
Video link: SIMPLE WAY TO CUT AND JOIN SQUARE TUBING, accurate measurement result : / jvvbbfau8_
support: bit.ly/3usOgIw
#diysimpledoor #affordabledoor #tubularplywooddoor

[@AdiLas-my3xb]

Mantap sangat baik ide nya bos ku

[@jamalodingmacalimpao3120]

nice content po.

[@5mblog995]

Very nice

[@royweldingtv]

Ayos boss buboy galing

[@metalworksph]

Thank you boss roy

[@jhonalynestrera6678]

Galing Boy...

[@metalworksph]

salamat te

[@nhelmercsdiy7521]

Aus ito tol ah, bery nice!!

[@metalworksph]

Salamat boss.. yan lang nakayanan.

[@arsadabubakar5279]

Nice job master.

[@metalworksph]

Thank you very much, newbie fabricator bro.

[@CHLEOMENTETV]

Well done.. nice diy.. shout out bro..

[@metalworksph]

Salamat boss..

[@celsiargaocalayag]

This is so informative, thank you for sharing.

[@metalworksph]

Thank you maam

[@marioconcepcion7656]

Mas maganda po pag 1and 1/2 na tubular tapos nakalubog ung playwood flush door talaga ang dating sukat na sukat pa sa doorknob... Try mo un boss.

[@metalworksph]

@@marioconcepcion7656 napagandang idea nga nyan boss, salamat.Baka sakali makagawa next time. Pang low cost lang gawa nato at sobrang plywood lang ginamit ko.

[@tengtrinidad6224]

Sir gamit ka na ng autodark welding helmet

[@blackmystery1183]

+ m sna yan tapos para d nka angat lagyan m ng wallputy...maganda pa..or masilya...hehhe for info

[@metalworksph]

Tama ka dyan sir at sa advice mo,. pero pakibasa na rin description ng video.

[@taffythegreat1986]

I can imagine what that door looked like. Panel the one side and glass panels on the opposite side 👍👍

[@metalworksph]

Didnt put any glass in the tittle, video description, and in the video itself. Its only plain plywood & square tubing frame thats all.

[@taffythegreat1986]

@@metalworksph you’re right. All I’m saying, I can imagine what it would look like with glass in the one side. 👍👍

[@metalworksph]

@@taffythegreat1986 Yes I agree glass panel would be nice.

[@jayibarrientos116]

boss ano yung tools na may bala na revit?

[@MarygraceMagsipoc-v1v]

Anu po twag sa ginamit mo pang lubog sa revit??

[@genkidama7385]

Well done, i am also making a door frame, you know what i did, i used muriatic acid to remove the zinc layer, for this purpose i cut a simple pvc tube with a cap glued on one side, 60% the size of the longest tube (2.2m) about 1.20m 5cm diameter, volume is about 2.5 L , this way i plunge the zinc plated steel tube in acid for 3 mins on each side, and clean them with water. Because paint usually dont stick on zinc it peels away over time. ive seen people on youtube do it with vinegar and it takes 24h, but is safer. I managed to reuse the acid a lot of time, i have no clue how much it could last, had to stop for the night, easily removed zinc from about 12 meters (2x6m, ) of 2cm tubes in the first batch which contained 1L of acid and 2L of water. /!\ this requires much care while handling acid, avoid sudden moves that would make the liquid splash, i used glasses because no faceshield, special rubber gloves thicker than usual house cleaning stuff. never breath near the acid or wear apropriate ffp3 mask and you can live a longer life. Hope this helps somebody.

[@metalworksph]

Thank you sir, maybe I can try some other time in my next project. I usually used rust converter for painting preparation..

[@edwinelijan678]

sir ano gamít mo na size ng tubular

[@rolandmixtv.]

Pa shot out nman jan idol baka nman

[@metalworksph]

Shout out sayo idol🙂👍

[@eubalbaldres3938]

anong size ng tubular at ung frame na ginamit u pki list ung mga material boss

[@safeguard5395]

Pwede ba sa pinto Ng Bahay Yan parang Ang bigat kase .

[@lovemusic-yz2yw]

Sir paano po pag may wood door na den gusto ko door jamb na Iwas anay ano po suggestions nyo po?

[@metalworksph]

Pede naman tubular siguro sir pero ang alam ko meron nabibili sa hardware na door jamb bakal din, kung kasukat ng pinto nyo.

[@drekson23]

bakit kung metal sheet? d pa madaling mabulok? as long as maintained ang pintura.

[@CedrickRoblox]

Mga subrang plywood nga ginamit dba para mapakinabangan, magbasa ka kc nde ung puro katngahan ikinocomment mo

[@samplacido137]

lods title po ng background music? salamat po

[@metalworksph]

Pasensya na boss,di ko matandaan ang title check ko muna at comment ko din once na mahanap ko. Yung ginagamit ko music usually ay non copyright music galing sa youtube studio.. pede nyo check dun boss.

[@rommelparungao7876]

magkano po inabot lahat ng materyales?

[@john-vt7nk]

Bakit mo pa pinutol yung plywood.. nice

[@metalworksph]

Nasa description at video boss kung bakit ganyan yung plywood.. yung price ng plywood nakalagay sa kanya is 0 kasi sobrang plywood lang ginamit ko, kung buo siguro yung plywood di ko na hahatiin. SALAMAT boss

[@SHAMSIE-uh6hr]

anu po tawag sa machine na pang butas niyo para sa pako?

[@metalworksph]

Drill lang ginamit ko pangbutas boss at ne revit ko lang, wala ako ginamit na pako.

[@trendz8934]

Idol saanl kocation mo, gawa mo ko nyan...

[@metalworksph]

Zambales boss

[@riodelblogs7942]

Dre pasilip ng bahay kobo ko

[@phadzbenitez526]

D ipinakita ung harap🤣🤣🤣

[@bengabriel8237]

You cañnot put a good man down! Politics I very very dirty in the philippines.

[@MarygraceMagsipoc-v1v]

Anu po twag sa ginamit mo pang lubog sa revit??