DIY Measure Temperature using NTC Thermistor and Arduino UNO

This project is to measure temperature value using Negative Temperature Coefficient (NTC) Thermistor probe and Arduino UNO as micro processor. The measured temperature values are displayed on LCD Display shield and also can be saved in SD Card using Datalogger Shield for further processing. Temperature measurement is usually involved in solar photovoltaic application. The temperature data can be save and use in relation with other electrical parameters such as voltage, current, power and energy.
Solarduino blog page :
solarduino.com...
We would need readers like you to support us in order to keep growing. You can support us in the following ways :
1) Donate & fund raising
2) Purchase components from our Aliexpress Affiliate links
3) Like & Share videos & posts
Aliexpress Affiliate Links:
Aliexpress Mainpage - s.click.aliexpr...
1) NTC Temperature Sensor - s.click.aliexpr...
2) ARduino UNO - s.click.aliexpr...
3) LCD Display Shield - s.click.aliexpr...
4) Datalogger Shield - s.click.aliexpr...
5) Expansion Shield - s.click.aliexpr...
6) Dupont Line Wires - s.click.aliexpr...

[@MrHumanbird00]

Please how i add heater to this setup & control the temperature by lcd keypad shield buttons ?

[@mbpro08]

thx

[@alyaaahmed4462]

i feel something wrong with your divider : Analoge pin = R1*1023/(R1+R2) ?!

[@momenwahdan489]

Can i talk to you