DIY Mini CNC Engraving Machine | Arduino based CNC Router machine

$2/5pcs 2Layer & $5/5pcs 4Layer PCBs: jlcpcb.com
Hello friends in this video I have made a mini CNC engraving/milling machine. this machine based on arduino and GRBL firmware.
12mm plywood is used to make the frame of this machine and nema17 stepper motor is used for all three axis.
8mm smooth rod & T8 lead screw is used for all axis
500W spindle is used which is quite enough for this job.
I have tested it on wood, acrylic, and PCB it works well not tested on alu. but shallow cuts with high quality of endmill done the job I think.
All the dimension details of machine and components list available on my website please visit below link.
electricdiylab.com/diy-cnc-en...
How to generate G-code for this CNC machine
• How to generate 3D Too...
#Arduinoproject
#CNC
💻visit for more projects :-
👉electricdiylab.com/
👉FB page :- / innovativemr This video is made for entertainment purposes only. Please use judgment, care, and precaution if you plan to replicate. WhatsApp for custom projects [phone]

[@aprendiendo7651]

Nice! I did the same with 3d printed parts 4 years ago, then I changed to 30X30 profile aluminum. I havent used since two years ago due I wanted to add a camera, I tested on april with good results.

[@jayantilalnavik948]

Sandeep, you made a awesome cnc. Mind blowing.

[@icraftcrafts8685]

Well Done on your achievement!

[@shivanshchowhan166]

You are the true inspiration for the upcoming engineers ..💗💗💗

[@tereraimakusha4939]

woooooooow i love that one .....that"s super perfect

[@alexanderchajon]

Great video i understand now how works all! now gonna try

[@antielectric117]

Молодец! Очень хорошо. Tres bien!

[@RDTOYS]

amazing work bro

[@TheZee04]

Good job, very neat and properly planned design!

[@kothandapanir7921]

Excellent hats off your work

[@jyothirmayeelucky2614]

You did great job you are so innovative..🙏

[@MuhammadDaudkhanTV100]

Excellent working and cool content amazing video

[@filipverschoren6504]

GREAT !! more milling projects please ?

[@programadordecontas5058]

Projeto incrível

[@MuhammadDaudkhanTV100]

So super nice work and thanks

[@JPToto]

This is fantastic. Nice work!!

[@MuhammadDaudkhanTV100]

Excellent working

[@DIY_Engineering]

Nice job, man, very similar to what i'm building. By the way, you shouldn't mount the lead screw directly on to the motor shaft, because on higher loads you might have acuracy problems. 👍

[@MuhammadDaudkhanTV100]

So super nice work and cool content amazing video

[@Artnovetor]

Muito bom, trabalho preciso parabéns.

[@EasyOne]

Nicely done

[@satheesh.t]

Hey Mr Innovative, Thanks for the wonderful project & the detailed documentation in your website. Could you please elaborate how the PCB milling is made? How to generate the Gcode from Gerber files (or any other PCB design file)?

[@cipry1010]

Very fine traces on pcb for a wooden cnc

[@alsaimstudio5070]

Sir your video is vere useful for me

[@Arabyservcom]

wonderful project

[@buyme1store222]

Good and complete video

[@DPTech_workroom]

Finally!!! 👍 Why don't you do a box type CNC? (helps with dust and noise - like my...)

[@binsonkc7661]

Excellent bro

[@jm2240]

Bro this is the best and most neat CNC build video...keep it up By the way where did you learn all these skills?

[@balexfox]

Nice job thank you

[@diegotachido]

Amazing!

[@thechemist7995]

You are genius

[@SolehAlYunus]

First!!! Your is so cool!!

[@Chamyne]

wow, parabens esse projeto e incrivel, sou brasileiro e ja tentarei compra as peças

[@ronaldoramos5767]

@Luiz Fernando Valeu pelos arquivos...estava começando a revisar também e vi seu comentário. Me diga uma coisa,chegou a montar a CNC?

[@moviesadd350]

Super se bhi uper

[@andrevdm6406]

Impressive !

[@Dancopymus]

Very cool! A shame, that the work area is very small, although it is for small things. Thanks for sharing.

[@LucasEloi]

Awesome!!!

[@lOlivetGT]

Excelente work. Bro can you make a video tutorial to makes the GCodes?

[@mechatronics9565]

nice project

[@hsider]

Amazing work, the pcb part example is mind blowing, did you use it in any of your projects?

[@sathishapoojary5855]

Super......👌👌👌 Thank you for uploading my request video..

[@uttammajumder1008]

Good job

[@aberateklehaimanot9804]

great,what software have you used generating G-code?

[@flyingbeaver57]

This setup might be suitable for cutting vulcanized fiberboard pieces of guitar pickup flatwork if a low-power cutting laser was used instead of a router head. Even with very fine bits, there's tear-out even with very small, very sharp cutters. Fred Stuart has a purpose-built laser cutter for making flatwork that he demonstrated in a video several years ago (maybe 10+), and the flatwork come out beautifully. Preferable to dies and a punch press, given the cost of that kind of setup (only useful for large production runs anyhow). This looks like just the machine for the job. It would actually only need to be 2 axis, X and Y, since the material is flat and not very thick.

[@forMakers]

I saw a good video ^ ^

[@melgross]

Really nice. Though these days, I no longer have the patience to make something like that from scratch. Way bay when I did build my first computer, an S-100 buss machine from scratch.

[@CreativeHRM]

perfect

[@adriandorado1046]

muy lindo !! pero estaria bueno q se explique su coneccion

[@mayurighatol3414]

Really awesome bro pls make 3d printed same pls bro

[@GACWaremme]

You connect the motors to the cnc shield, but what about the mill ?

[@HarshPatel-ql5qc]

can you please tell me, which software you can use for pcb milling???

[@CreativeDistroyer]

awsome.

[@shoppingoneclick2044]

So nice... Is there any blog or explanation of your work? How much it cost ? DD you have more refined model of this project?

[@dilakshankamalathasan6070]

Respectable sir please make a separate video about grbl, and the software and interface and setting position,home for a cnc milling machine, i couldn't find such video anywhere else please please 🙏🙏

[@zhuangs4775]

me too 。plese

[@gamezaade1690]

Nice video

[@alsaimstudio5070]

Sir youn have red angle setting What's its name or where are you purchased that

[@creativesamurai8372]

Hey, this is exactly what id like to build, but the price of the 500w motor seems rather steep. could i not just use a motor from an old electric drill and a screw on chuck? or would the rpm's be to low?

[@sufiyanansari8016]

Nicely done....👍🔥 Can u plz mention the names of all the parts? And tell us how to make codes?

[@Du2025]

it's wonderful. How can you do it?

[@syedsulaiman8380]

Great

[@mattewblack6549]

Hi, have you got PDF frame files? I can't print it. Thank you

[@abdurrahmaankazi9913]

Which software did you use to upload the gcodes?

[@kifahzaidan4505]

Hi, Thanks a lot, its really greate effort and great knowledge. i need to do a project for a preset position linear actuator with a DC motor abd a stepper motor, with Arduino Mega or UNO but i am not able to write the code and the scheme, can you please help. Regards

[@Bradiant]

That side action on the cutting disk with no guard could have ended bad... I'm pretty sure that's like the #1 thing not to do with that type of disk. It creates thinner areas midway through the disk which makes it much more prone to self destructing. I'm sure if I was in your position I would have done the same thing at least with a guard and face shield though. I usually just use a file when the material is very small.

[@phantominception2881]

Time

[@manbhawanfurniture]

Sir kon sa g code sender app use kiya he. Which g code sender are you using?

[@songsiri1824]

Cool

[@Waseemvlogger805]

Nice

[@bandido7994]

Beautiful my friend!!! How much did you spend for all the materials? US dollars

[@stephenbumiyo5081]

Which application are you using to design it?

[@malkaidrisi1105]

Please make a ceiling fan motor winding CNC machine.

[@sunilkumardash6814]

Can this machine engrave aluminum & brass? Do you sell complete machine? Any link?

[@scienceandtechnologyst8134]

What spindle u used bro and what collect chuck u used nd bits ....i want all details of spindle nd bits

[@HandyBear]

That's a clean build! What's the music?

[@MrInnovative]

its from yt music library

[@soupwizard]

I used Shazam to look it up: Groove - Drew Banga (on youtube) Jeremy Blake - The Emperor's Army (on youtube) meanmachinedean - smart guy (Spotify open.spotify.com/album/4uigcOlZyZyN927oW95Kn7?highlight=spotify:track:7biWspQi8Qwt7yIxNsgKOM)

[@HandyBear]

@@soupwizard Thank you so much! You're a legend! :D

[@prashantsonisoni9101]

Cen we use on metal like silvar?

[@msdesignru]

it works

[@josueltodrigues4416]

Esses trilhos voce pode enciontrar em sucata deTONER de3 impressoras laser eles tem 30cm por 8mm da para fazer um excelete corredor do carro ....

[@praveensharma673]

We are trying to make cnc with Arduino mega 2560 and cnc shield and A4988 steeper motor driver. We have uploaded GRBL code from open source. But the moters are doing vibrate only. We have checked several times connection is correct. We just seen an error : 22 on GRBL controller. Pls help me out ASAP.

[@rameshtripathy5978]

Nice project !Where can I get a complete Kit to assembly, also how much price ? Can i get it in India ?

[@KaiserMateo115]

hi, do you have the measurement for the bed? thanks.

[@MultiTester]

cool

[@thilanfernando9589]

Thanks for sharing this. Is it possible for you to share the Arduino code for this CNC.

[@aleksandrpalianichka2392]

Странно. С таким шпинделем Ардуино, у меня не работает. При запуске программы кода, через несколько минут останавливается. При переходе на Mach 3 и другую плату, проблемы пропали. Шпиндель очень сильно фонит((

[@aurumfiligranasantafedeant4177]

Can this CNC machine working on 40 mm Cross wood milling ?

[@ankitjhinjhore9838]

Its really good bro . How did you do its programming?

[@tharindudilshan8551]

👌👌👌👌👌👌👌👌👍👍👍 I am sri lankan good potos

[@madasamyramasamy6297]

Can I convert 1610 as working area of 20" * 20" , because of 1610 is having the working area of 4" * 3" only by through this arduino card....kindly reply me....

[@satyanaidu9086]

Dies it used for graphite ??

[@deepbhavani7391]

Great designed😍😍bro how much bigger job we can put in this machine!

[@MrInnovative]

no much big but 120 x 120 mm x 15 mm

[@Turki525]

it can cut or just engraving ?

[@victorquiros7605]

Hola buenos días dónde puedo comprar los accesorios para la maquina

[@BrianReplies]

How deep can the super fine one go?

[@logbookinfo8015]

I am in need of such a. Device cost effective

[@user-ke3ut9qk8p]

Excellent Nice work and great ... How much does the device cost please

[@kalbo1359]

Hi has the option of getting the wood file in PDF format?

[@mustafashoque6704]

Very nice information...if one need what will be the cost of this build up...

[@VatsalyaB]

How much these old dvd player costed you?

[@syahirshahidan9358]

Hai i what to ask how to activate the stteper motor

[@muhammadsaleeem1452]

kitni cast aa jati ha kia ap k pass ready be hn

[@user-vg7dj7jd2h]

Hi, How are you ? Your vidéos on You Tube are very cool ! I have a question for you. Your plan for the mini cnc engraving. I want to try to reproduce it. But I can't read the plan you described. could you please send me a picture because I can't read the dimensions please ? thanks in advance Greatings, Guillaume (from Belgium😉)

[@lemchingshak8114]

Do you sell prebuilds?