DIY Misting System for Chameleons

Most parts bought off Amazon. The parts on Amazon were listed for a patio misting system. 3/8" and 1/4" od quick connect pieces
Pump
IEIK Water Pressure Diaphragm... www.amazon.com...
Power supply
AspenTek 12v DC Waterproof Led... www.amazon.com...
3/8"×1/4" T
Express Water Union Tee 3/8" x... www.amazon.com...
1/4" Shut Off
Malida 1/4-Inch Tube Quick... www.amazon.com...
3/8" Female Connector
YZM Female Tube Quick Connector... www.amazon.com...
3/8"×1/4" reducer
WATTS PL-3021 Push Coupling,... www.amazon.com...
3/8" shut off
Malida water purifiers Tube Quick... www.amazon.com...
Timer
Century 7 Day Heavy Duty Digital... www.amazon.com...
3/8" Bulkhead
LASCO 19-6275 Bulkhead Push-In... www.amazon.com...
1/4" Bulkhead
LiquaGen Bulkhead Union Connector... www.amazon.com...
1/4" T
PureSec 2017 UTA14X3 mini white... www.amazon.com...
1/4" In line nozzles
10 Sets 1/4 Inch Tube OD Plastic Slip Lok (Quick Connect) Garden Fogging Misting Nozzle Tees with Sprayer (0.2~0.5 mm) - 0.2mm www.amazon.com...
Nozzles
360 Degree Adjustable Misting... www.amazon.com...
The hoses were from Menards. I bought 25' of 3/8" OD hose and 25' of 1/4" OD hose.
Be creative with your set up. Hopefully this video will lead you in the right direction.

[@chandlerallen4196]

I made one similar to this, but instead of using a relief valve to regulate the pressure, I just used a voltage knob (potentiometer) in between the power supply and the pump. I've got it set on about 60 percent. Makes the pump a lot quieter too and probably extends the life. Mine has been running great for a year now.

[@zoki.to974]

i am aware its 3 years latter, but man move that pump from the top of that bucket if you want it to be quieter. its acting like drum and amplifies pump noise

[@kourtbee8509]

How do you set it fir a min. Mine wouldn’t cooperate

[@mosaexotics6587]

The pump is either on or off. The timer itself has it for a minute, minimum to be on. You might want to take a second look at the timer or may have to get a different one.

[@kourtbee8509]

I’m troubleshooting it. I think I got it now! You had me at 1 min timer I bought it within 2 mins and I’m learning my way around it. I think it will serve me and chameleons well! Once I learn it lol great video!!

[@davedenofa7828]

hey man could you put links for all the items itll help so much

[@mosaexotics6587]

Thanks for checking out the video and commenting. I will put the links in the description. Probably tonight if I get a chance.

[@davedenofa7828]

@@mosaexotics6587 much love man I've been having a real hard time with this since I have 0 experience with plumbing

[@mosaexotics6587]

Hope that helps. I got the links in there.

[@mosaexotics6587]

@@davedenofa7828 No problem. Glad I can help. 😎

[@dantel8995]

The most expensive component is the pump and how did you spent 200 bucks if the pump is 25 bucks. I am making a system and it will only cost about 50 (not including power supply and timer because I already have)

[@brustertootwopointo4644]

Maybe mount the pump to something more stable? Not the "snare drum" bucket lid. I put mine on the concrete floor of my frog room sitting on top of a thick piece of foam but anything similar should work.

[@jerseyj973]

Oof that's loud, you weren't kidding. The mistking pumps are the best, which is where most of the cost is. They're quiet and can run dry just in case of a mishap and no water left. Their seconds timer is great too. Starter kit($100-130usd) can run 10 enclosures essentially.

[@mosaexotics6587]

You're right. I have the Mistking as well. Works great. Thanks for checking out the video and commenting.

[@MrHartApart]

would you imagine this could work for, lets say, camping out at the lake with an EZ up?

[@mosaexotics6587]

Thanks for the comment and checking out the video. I'm sure this will work camping. You would need a power supply for the pump but other then that I don't see why it wouldn't work.

[@eddwiggins4383]

Mounting the pump to what is basically a drum was a mistake. You can wrap foam around the pump and make a little box for it. Or make isolated mounts

[@mosaexotics6587]

I appreciate the input. Thanks for checking it out and commenting

[@charliedathorne]

hey followed this guide and works brilliantly. Thanks a lot! just wondering if you ever got it quieter, as i know you said it was loud, thanks a load again, even with the sound its saved me about £70

[@mosaexotics6587]

That's great. I'm glad it saved you some money and helped you out. I appreciate the kind words. This will work on the Mistking system as well. I haven't gotten a quieter one yet but but been working great without any problems.

[@charliedathorne]

Thank you loads man. Best of luck with the next project. Got another sub

[@ChileThailandtravel]

Hi Mosa. I just bought two days ago but sadly.. the pump making too much noise.. i was thinking to install it outside balcony where i sit for lunch sometimes but the noise is too much.. i had to uninstall it.. i already subscribe..

[@mosaexotics6587]

That pump is loud. I have my set up in the basement so it really doesn't effect me to much.

[@ChileThailandtravel]

MOSA Exotics i bought a new pump. Very silent.. I uploaded in my KZbin channel.. you will amaze. Very silent and perfect for all places ..

[@sunilnehru6472]

When I connect my pump to five misting nozzle the pump runs intermittently and makes a loud 'clacking' sound. From your video I see your pump does the same. Could this burn out the motor if run for some time?

[@mosaexotics6587]

My pump is going on 2 years now and still going. I guess it depends on the pump and how it's made. I have a back up in case it burns out. I know the pumps don't last forever.

[@mrlazli]

I believe that vibration over time will do damage your pump.

[@mosaexotics6587]

I'm not sure how much time you're thinking but my pump is still running.

[@fanta09]

Love your accent. Chicago area?

[@mikewebster9500]

This is awesome, I need something like this... however, that pump is loud, any solutions for that?

[@mosaexotics6587]

The only way around it is to get a different pump. Mistking had the quietest one but they are pricey.

[@doprisi]

YES, the pump is placed on the lid of the bucket, this will act as an amplifier. Placing the pump suspended by elastic rubber bands or at least on foam will greatly help with the sound in theory :) Ideal, the pump is placed in sound-absorbent material, suspended in a concrete or else heavy mass chamber.

[@ChileThailandtravel]

The pump make too much noise.. that is bad news for installing at balcony for dinners or lunch.. too much noise..hummm

[@NORTHERNEXOTICS]

now this is cool

[@mosaexotics6587]

Thanks. It was a pretty cool build. The sprayers worked out better then I thought. Thanks for the comment and checking out the video.

[@Sreyam86]

Yikes

[@7up2u2]

The reason for the loud pump is because of where it’s mounted.Remount the pump off of the bucket and you’ll be much happier.Sorry if this was already suggested.I couldn’t read through all the comments knowing the issue.Great build!

[@hooperdavid1980]

Does this do a fine or very fine mist also what timer should I get for seconds not minutes on and off Also will this do more then 50 cages

[@mosaexotics6587]

Thanks for checking out the video. The mist I have is a fine one but it depends on the type of nozzles you use. The timer i'm using should be in the description of the video. I go one minute 3 times a day but you can also increase or decrease if necessary. I don't have 50 cages hooked up to my set up but I think it would come close. You can get a stronger pump to be on the safe side.

[@hooperdavid1980]

@@mosaexotics6587 I was afraid it would put too much water overtime in the translucent storage containers I have crested geckos Need something to mist 60 cages possibly

[@mosaexotics6587]

@@hooperdavid1980 as far as the set up goes you can run as many nozzles as you want but you would have to get a different pump and timer. Hope this helps.

[@rogermims9119]

I don't know Mike. I bought a Mistking starter for $120 brand new. Its pushing 16 nozzles for the last 1 1/2 years. Its about 6 ft. away from me in the living room. I never hear it go off. I think I can hear your pump from here. However, this is a great DIY. I'm going to look for the nozzles in this video. I've been paying $19 for Mistking double nozzles. Thanks for the tip.

[@mosaexotics6587]

I have a mistking as well and your right, it does run quiet. I didn't know the starter kit could run that many nozzles. Thanks for letting me know. Thanks for the comment.

[@ChileThailandtravel]

The pump makes too much noise.. that is bad news for me..

[@charliedathorne]

Hello! Great video. Confused on how you connected the pump to the mains?

[@mosaexotics6587]

Thanks you. Hope it helps. At 4:48 you can see the fitting I used for the supply. The hoses just get pushed into the connectors.

[@rajbir8443]

Beautiful vedio.thanks dear. Sir what is the wattage of the pump and voltage. Please advise

[@mosaexotics6587]

It's a 12v 60watt unit. The link for the pump and the rest of the parts are in the description of the video. Hope this helps. Thanks for the comment and checking out the video.

[@guest19961]

How’s the pump if you’re not gravity feeding water to it?

[@mosaexotics6587]

The pump has been great. It's been over a year now and no problems. Still very loud though.

[@mohdkhairulnizambinhamjah1993]

nice bro....

[@acbent11]

I think you were stalling your pump. I picked up one of these pumps for a small water injection system on my small turbo car. Mine is set to kick out at 35 psi, but it's adjustable up to 80 psi. With the nozzle I have it should produce a fine mist. I don't need much volume, so a 160 - 200 psi pump was unnecessary. I liked your video.

[@mosaexotics6587]

Thanks for the reply. I'll have to check out some different pumps. Thanks for the info.

[@SupremeGecko]

@@mosaexotics6587 Just curious, did you find another pump or are you satisfied now with this one. GREAT video!!!

[@mosaexotics6587]

Thank you. The pump itself is great. Self priming, works if I run out of water and has a great gpm ratio. It still is very loud. I'm looking into s different one but this one is still going strong.

[@SupremeGecko]

@@mosaexotics6587 I'm doing my comparisons to setup a 15 enclosure setup for geckos right now. Your video helped a lot!

[@mosaexotics6587]

I'm glad it helped you out. That's why I post them.

[@orbelgalvarado]

You could of gotten those fitting cheaply in AliExpress. Great video and thanks for the links. Those screw will eventually rust I think I seen plastic bots and nuts at menards

[@mosaexotics6587]

Thanks for the comment and checking out the video. I'll have to check out that site when I need more fittings.

[@burgeyburgful]

Could "have"...not could "of".

[@rjakiel73]

Did you use mist king nozzles? If so are there commercially available nozzles that aren't as pricey?

[@marlonchavarria978]

The bucket needs a vent hole to release pressure from the inside of bucket

[@mosaexotics6587]

Thanks for checking out the video. In the video, at 5:12, I have a tube running back to the bucket. It's not sealed but rather just stuck though. This acts as a relief.

[@cameronsheridan5997]

Could you guess as to how much water it is using over the time?

[@mosaexotics6587]

It all depends on the settings you have to turn it on and off and how many nozzles you set up. I have 5 nozzles that go off about 4 minutes a day and go through about 5 gallons every 7-10 days.

[@jthalbig6505]

How did you mount the sticks in your chameleon cage?

[@mosaexotics6587]

I use tacks or small screws but I think I may have to try something else with my next cage rehab. I'll have to post a video on it to show everyone. Thanks for checking out the video.

[@jthalbig6505]

@@mosaexotics6587 And what sticks did you use?

[@mosaexotics6587]

@@jthalbig6505 I use dowel rods from the home improvement store but I like natural sticks as well. If you use sticks from outside you have to put them in the oven for 25 minutes at about 250 degrees to make sure there are no bugs or parasites in the wood.

[@anujgupta6716]

The water is lraking through T joints What to do

[@mosaexotics6587]

You either didn't cut the tubing straight enough or it's not pushed in enough. Try pushing the tubing in more.

[@Anna-tc6rz]

I used a submersible pump, works better. Just make sure you get one that can run dry just in case or make sure your water bucket is way oversized

[@weightupitshannah]

What kind of submersible? How many gallons does it move to achieve high enough pressure to be forced into a fine mist?

[@sdqsdq6274]

is the pump self priming ? or need to have water inline

[@barryammerman6317]

Any reason not to hook this directly to the city water supply? Skip the bucket and pump all together?

[@mosaexotics6587]

Thanks for checking out the video and commenting. I do the pump and bucket because I have hard water and it would clog up the nozzles. I also need a timer to go on and off every hour or so, during daylight hours, for misting the chameleons the proper way.

[@barryammerman6317]

I have ordered a system along with a NC 24v valve that will open when the pump kicks on. Because of your comment about hard water I got a calcium inline filter.

[@mosaexotics6587]

@@barryammerman6317 that sounds perfect. I'll check out the video if you post one.

[@kill56erb5ee]

@@barryammerman6317 be careful about the chlorine in city water!!!

[@mosaexotics6587]

Good point. Thanks for the input.

[@mushterifictvfreetutorial6368]

Is that automatic?

[@mosaexotics6587]

Yes I have it on a timer

[@Mekhanic1]

What plant/tree is that?

[@mosaexotics6587]

Thanks for the comment. I think you're talking about the Umbrella plant. It does great but make sure you run a quad light fixture. I had to add extra lighting for the plants.

[@ravinmenon1593]

Wat type of motor is this

[@gurdeepsingh7845]

Sir ye sara saman kase melgya

[@RinkuSharma-tf6hi]

Bhai apna nambar send karo

[@mosaexotics6587]

What?

[@mjayb83]

Daughter's bday is Sept 11th, she wants a jacksons chameleon. Do you sell smaller males? I'm from bridgeport...

[@bowwow255]

can use cars wiper water blower as alternative which is 12v.

[@mosaexotics6587]

Never thought of that. Thanks for the tip.

[@LegalizeTheNuclearBomb]

If you didn't mount the pump to the lid would it of made less noise?