DIY Modern Floor Standing Lamp

[@raymondmcgee4491]

Another quality project! I like how the cord is purposely (and skillfully) placed as part of the overall form and not an eyesore you have to pretend isn't there. It's the little things👍🏾

[@nancyf998]

Just finished this lamp last week. We like it so much we’re making a second so we can have one on both sides of the room and are going to try scaling down for bedside table lamps for our bedroom. Stained it espresso color. Love the look of the lamp. Had an issue with the extension nipple that is listed, Amazon must’ve changed it’s measurements, but the bf was able to figure it out. Great job and thank you! We just got into wood working. This was a great project.

[@Woodbrew]

That's amazing! You'll have to send us pictures!

[@losAbrahams]

is this explosions in the sky? sounds amazing

[@akams3]

Great video. Where do u get the cone, put atop the lamp stand? It's not included un the description list.

[@avrahamlevy3619]

What happen to "free" plans.If you go on your website it costs 8$ ????????

[@trevor6248]

A pocket hole jig would do you wonders! A very good investment.

[@Lawry579]

Great modern design. Thanks for sharing 👍

[@cudazi]

I've had a lamp like this bookmarked for project inspiration for like a year now, nice work!

[@Woodbrew]

+Curt Ziegler Haha same😂 finally got around to making it😬

[@cudazi]

If this video does well, I'd love to see more wood lighting projects :)

[@alsanova]

Very nice and simple project :) The only advice I would give is to use electrical tape onto end of braided cable before stripping, this to prevent fraying and for added electrical safety as well.

[@Woodbrew]

+Kreative Blog We burned the ends, but it wasn’t pictured. Thanks man!

[@3x3CustomTamar]

After going to Haven this past summer I will def be going to workbench con as well... cool lamp too!

[@adamp8463]

Beautiful! Both of your work and yourself, boy and girl.

[@Woodbrew]

Thanks!

[@vernonguidry5492]

The end product you display in this video does not seem to be the one you built. Your silent video seems to show 90 degree angles on all the joints but your end product clerly shows a taper toward the top. What' up with that?

[@sarjono6569]

good job

[@pemuda89tv]

Nice, i would pass the cable into the wood. But you have did great inspiration..

[@Woodbrew]

Thanks 👍

[@srinivas3358]

Two hard working young Turks. Nice, Good luck.

[@mikecolo2158]

Nice work. I like the simple lines on this lamp. You have inspired me to give this a try.

[@bambatsa1310]

Nice project but the free plans in the description is somewhat misleading.

[@casllab69]

Alexandros Kypreos clucking clickbait

[@xxoustou]

Μπες printerest φίλε έχει πολλά σχέδια δωρεάν

[@nikkier2409]

You guys are neat and the video was worth the watch.

[@SeanEvelegh]

Nice video Woodbrew! I love the design of the lamp. And i like how you did the finish with resin and Tung Oil. Thanks for Sharing

[@Woodbrew]

+SE Woodwork Thanks! Waterlox is awesome👍🏻

[@jaanu1263]

Hi, loved the design. Can you please share the dimensions - width and height of the lamp?

[@Woodbrew]

Sure! 13″ x13″ x 6′ tall.

[@tn8141]

That looks nice but I wonder how it would look if you Incorporated a couple of shelves in the middle of it

[@dawnjones1032]

Nice job. Love the music.

[@Woodbrew]

+Dawn Jones Thanks for watching!

[@der_Kleister]

Simple but really nice lamp!

[@uniquemind3434]

wow amazing...love it...

[@Woodbrew]

+panchanan sahoo Thanks😊

[@alexh.3389]

Awesome! This is my favorite project so far 👍🏻

[@Woodbrew]

+Alex Hickman Thanks Alex😊

[@jimmieusaf-pol2639]

Very nice you all! I thought after watching assembly, if I made one of these, or something like it, I'd try and hide the wire inside some wooden round stock, but have no idea how I would drill out the center of it, unless I did it in sections and then glued them together. Hmm

[@Woodbrew]

+Jim USAF ret Hmm interesting idea🤔 Thanks!

[@RenoScruggs]

Great job guys I enjoy your videos a lot .

[@Nicolas-wo8vp]

I loved the lamp, could you tell me how to access the free plans of it. Thank you very much, your projects are great.

[@AreBaloni]

Really nice design, and great video!

[@JaySybrandy]

Why . . . . . . . . . Do you guys only have 41,000 subscribers you guys deserve more :) 👍☺️

[@kadenhenry1852]

I was excited to make this lamp! I went out and picked up the materials, and ordered the electrical bits online. Then I proceeded to check out your "free" plans...which were $8.... So, I just figured out how to do it myself. Turned out very nice! Thanks for the great videos, guys! Keep it up! But perhaps make the "free" plans actually free... just a thought.

[@Woodbrew]

They are actually $0.01. Our website wouldn't allow us to have it for $0.00. 🙁 The end of the video tells you where to go to get the code for the plans.

[@kadenhenry1852]

Woodbrew I'm very sorry. Although I usually watch your videos til the end, I clearly missed that part! I stand corrected. Thank you for replying! And keep it up, you guys do amazing work together!

[@imcinema]

Good stuff guys! Don't forget to credit the music!!

[@MrTakan]

Nice lamp, i would have hidden the cable same way from socket to the bottom (more work but all wood then).

[@Woodbrew]

+Small CodeCompany We love the fabric covered wire. I guess it’s just a difference in taste😊

[@glendysrodriguez3743]

what are the measures? I would like to do it, Thank you in advance

[@Borsch_TV]

Does the lamp have sufficient resistance to swinging? in my lack of rigidity ...

[@terryannanderson8812]

Beautiful

[@MakingAndFixing]

Ooooh, so simple and yet so beautiful. You got me inspired!

[@Hankcowdog]

you should clean up around your electrical connections , all that frayed jacketing could be a problem

[@devils30hockey]

Very nice love the lamp you guys work so well together. Could I get one of your sticks for my Makers wall Please and thank you

[@prittywood6811]

Awesome build guys! Very well done. Thanks for sharing!

[@rockkkstar...4194]

I love uuu

[@DylansDIYWorkshop]

This came together great! That wire looks perfect in that lamp! I'd love to join you guys at the workbench event. Hopefully I can go to most of the events in 2018.

[@Woodbrew]

+Dylan's DIY Workshop Thanks!! YESSS come hangout! Tons of great networking opportunities😊

[@tylerbaird8199]

Hey guys, I bought your plans and it states that the half lap cuts are to be 3.5” long. How does that make sense if the boards you said to purchase are 1x3 (i.e. 2.5 inches, as you clearly mark on the plans)? Shouldn’t each half lap be 2.5” wide?

[@Woodbrew]

Hey Tyler! We are fixing this issue. You are correct. Email us at [e-mail] and we will get this sorted for you :)

[@MultiTom1956]

Simple and beautiful build guys:-) love it! thank you so much for sharing.

[@Woodbrew]

+Mahendra Tiwari Thank you!

[@FredMcIntyre]

Awesome job guys, great design! 👊 ....I love the choice of cord as well! 👍

[@joeselzer850]

not what i was looking for but nice i want to make a PVC floor lamp that will look like hang man like look

[@Woodbrew]

Nice

[@mohdbilal1681]

I need to make a top round lamp shade plz tell how can i make it..thank you

[@jronmanbuilds]

nice video and looks like a new edition to the shop. a sawstop?

[@malininrn]

Like! Хорошо сделали

[@tonybp965]

What happened to the really cool info you mention in the beginning?

[@etrexofx1360]

Now I have to eye this project because the plans aren’t really free

[@KToth-rc4oh]

You really didn't show me how to make a lamp since you put some of it together off camera. Cool lamp though.

[@Woodbrew]

Sorry about that!

[@boma8218]

smart

[@whitneyyadon5600]

What music did you use? Sounds like Explosions in the Sky?

[@Woodbrew]

Oooo the days where we got music from KZbin Audio library

[@adrianramirezp.6716]

Perfecto mis amigos

[@Woodbrew]

+Adrian Ramirez P. Gracias😊

[@leonidasdamas4645]

Ficou muinto bom Parabéns

[@sew19dollars19]

I'm currently at a stop light next to you by Thomas Hospital😂

[@renedomh]

Hermosa lampara pero donde están los planes libres

[@eduardodeoliveiramachado3291]

When you got some machines is better, but i have not though.

[@Woodbrew]

It take time to build up your shop, but you have to start small and upgrade over time.

[@eduardodeoliveiramachado3291]

@@Woodbrew that's right! Great job bro

[@MaDeuce80]

Music sounds like Interpol

[@airyrelic43]

Why is everything in slow motion?

[@Woodbrew]

Ehh, it was an editing style at one point in time ❤️

[@blackcatsmovies5256]

Ads before the video starts = one thumb down + don’t watch the video.

[@Woodbrew]

❤️

[@Supermurray42]

Free plans.... with $8 price tag...

[@meendog28]

I thought that the plans were free? it's asking for 8 dollars.

[@tehseenhaider3583]

Your work is amazing. i would like work with you. we also wooden and acrylic lamp manufacturer. are you interested?

[@jonathansimmonds5784]

Typical of kids today, no common sense. Have a good supply of spare bulbs for the number of times it falls over because it's too narrow across the base.

[@Woodbrew]

Lol. It has happily stood in many corners over the years. I should probably add that it has never fallen over. You should work on your rants all the insecurity is pouring out on the internet’s table🥱🥱🥱🥱

[@niko9942]

Change the description in your video. The plan isn't free.

[@Woodbrew]

You have to go to the round dining table video description and find the coupon for the free plans. We say this in the video! The plans are $8 until you apply the coupon code.

[@howardleo7880]

strange music didn't match the scene and occasional slow motion is weird.the girl is cute otherwise I can't last for even 1 mins...

[@carrzo6318]

Nope. Horrible plans don't bother, just paid $14 for them because I'm an idiot. Example: "Cut perpendicular 2° angles on the ends of your pieces." A "perpendicular 2 degree" angle is not possible - a perpendicular angle is always a 90 degree angle, so I'll just figure it out on my own.

[@erictalley1995]

What happened to "every single week" Molly? Your channel is suffering.

[@JohnSmith-oy1ev]

Eric Talley They’re doing better than you though!

[@xxoustou]

8. 83 for the plans of this? Really? Take my unsubcribing

[@robbyx6846]

How about DIY getting yourself to the gym little lady.

[@earlsarcades]

Unplug your lamps.

[@earlsarcades]

They will purposely burn down your house and say it was lamps.

[@FernandoBravoNogues]

Scam! $8 is not free

[@Woodbrew]

You have to go to the round dining table video description and find the coupon for the free plans. We say this in the video! The plans are $8 until you apply the coupon code.

[@jacklanders1921]

It’s not DIY. A layman can’t make it 😠

[@Woodbrew]

I mean technically you just need a circular saw and a drill :)