DIY Office Build Part 2: Experimental plastering, roof panels as a ceiling, 3d scans,&custom fixings

Рет қаралды 2,189

Күн бұрын

Пікірлер: 40

@thenullco 5 ай бұрын

Your channel is such a find. I was researching 4G failover for home, and here we are. Right up my street. Awesome space.

@beyondtheworkbench 5 ай бұрын

Thanks, I hope it is of use, the most recent video on the internet on the Hotel might be the most useful as my attempts before were working through the issues before I arrived at the solution

@thenullco 5 ай бұрын

@@beyondtheworkbench Excellent, thanks! I'll check it out. I am now binge-watching your entire off-grid journey, so might be a while. 😁

@shirecanelo 5 ай бұрын

When I did this with my uncle in an old house in stamford, we used a piece of gaffer tape to smooth the round corners...it worked great

@beyondtheworkbench 5 ай бұрын

Thats a great idea. My brother lives in Stamford and I grew up in Oundle

@NeonGenesisPlatinum 6 ай бұрын

Loving this build mate. I can't wait to see the complete job, I think it is going to be a very nice cosy space. Please keep these videos coming I really love them. Thanks again mate.

@beyondtheworkbench 5 ай бұрын

Thank you so much I am really enjoying seeing it come together.

@darwinsfish 6 ай бұрын

Used angle grinder to cut wriggly tin - works fine with correct cutting disc.

@beyondtheworkbench 5 ай бұрын

Thanks, I dont think I had the correct one as it was eating a disk per pass (lengthways)

@inquisitiveexplorerlee3299 5 ай бұрын

Good to see a industrious mind using what you have to hand, i either would have used the corrugated like yourself or for a wall depending how i felt a the time. Some people will pay 10x more to try and achive what you are creating. 👍

@beyondtheworkbench 5 ай бұрын

Thanks, I am lucky to have the bits hanging around but it feels so much more satisfying when you can reuse something for free and it looks great

@tezzathetracter2001 6 ай бұрын

Great video. Enjoying the content very much. Informative and entertaining. So glad I found your channel. P.S. The haircut looks great.👍

@beyondtheworkbench 5 ай бұрын

Thanks! I am really pleased you are enjoying the videos

@DaveD61 6 ай бұрын

Just a tip, if you over press or ‘polish’ the plaster too much you’ll find that when you come to paint the paint won’t adhere properly 😊

@beyondtheworkbench 5 ай бұрын

Aha, I have always had bigger problems than that when I plaster but now I am getting a bit better (it is atleast flat now) I will start to worry about the more advanced issues like you mentioned

@stuglover1526 6 ай бұрын

Great video. Something like this is good for cutting metal roofing. Milwaukee M12 FNB16-0X FUEL Nibbler

@beyondtheworkbench 5 ай бұрын

great that looks perfect!

@stuglover1526 5 ай бұрын

@@beyondtheworkbench I think it will make it much easier for you

@Max-tn1us 6 ай бұрын

Plastic bag technique over the radius for plastering apparently usually works best

@beyondtheworkbench 5 ай бұрын

Great idea thanks!

@jeanhelliwell8160 6 ай бұрын

Really great video. Love the tips on plasterboard. Loving the look. Great haircut. Only problem was all the adverts in this video.

@NeonGenesisPlatinum 6 ай бұрын

Buy premium, problem solved.

@beyondtheworkbench 5 ай бұрын

Sorry It annoys me as well when I watch my own video back to check it uploaded ok.

@jeanhelliwell8160 5 ай бұрын

@@beyondtheworkbenchdon't be sorry, not your fault. But when utube put so many in, it spoils it, I had one advert about 30 seconds in, then another a couple minutes later. Then the usual load that they put in. Still love the videos.

@TheDerbyshireRundown 6 ай бұрын

just wondering, how far is the nearest "big" shop like Tesco?

@beyondtheworkbench 5 ай бұрын

Its about an hour away

@TheDerbyshireRundown 5 ай бұрын

@offgridscotland how do you go about getting shopping, do you drive to the nearest shop or do yoi get a delivery?

@livingoffgridinscotland 6 ай бұрын

Multi material blade on a circular saw for cutting tin roof sheets…. Screwfix sell an evolution blade, just wear safety goggles and a hat

@beyondtheworkbench 5 ай бұрын

Ah thats a great idea. I have a multi material blade for my chop saw but diddnt consider putting it on the circular saw! thanks

@livingoffgridinscotland 5 ай бұрын

@@beyondtheworkbench I think it’s a slightly smaller one for the normal circular saws I bought a cheap nasty “guild” 240v saw out of argos specifically for cutting tin sheets, i just leave the blade in it It’s also good for cutting rafers etc which might have old nails in them