DIY - Power Supply using XL6019 (Upgrade XL6009)

[@Leandroroque157]

Does it have short circuit protection?

[@vetalveral8920]

Unfortunately, there is no short circuit protection and current adjustment with its stabilization.

[@slavoljubristic7876]

Is it possible to install two LEDs, green and red, to show when charging is in progress and when the battery is charged

[@VINInvents]

Yes you can

[@slavoljubristic7876]

Is it possible to install two biger LEDs, green and red at the box to show when charging is in progress and when the battery is charged

[@orlatris96]

Muito bom, obrigado pela partilha. Apenas fiquei com uma dúvida, alimentou com 12V e tem 30V na saída?

[@VINInvents]

Yes : ) I use a buck-boost converter, so it can output 30v with low volt input

[@orlatris96]

@@VINInvents the buck-boost converter, LX 6019? WHAT IS THE MAXIMUM AND MINIMUM INPUT? AND OUTPUT? Thanks a lot for the help. greetings

[@VINInvents]

@@orlatris96 XL6019, the output is approximately 1.3 to 35vdc

[@orlatris96]

@@VINInvents thanks

[@kamalkant381]

is this better than xl6009?

[@GieX_DIY]

Perfect

[@babali7588]

Obrigadi for video. I've got a question. You use Xl6009 and I know that device max gives 3A. Is it enough for your project? because looks like low to me.

[@VINInvents]

Its only to power for low projects.. I made a new power supply, I will be posting it by next week

[@babali7588]

@@VINInvents I'm going to wait for the video. Which device you will use on your project? Which circuit?

[@VINInvents]

@@babali7588 XL4016

[@VINInvents]

I have already uploaded a new video

[@babali7588]

@@VINInvents thanks I'll look

[@nasihin4729]

Itu bola lampu pln?

[@matrixredwood4817]

Guys Don't use hot glue to mount the converter board Because of the heat when the board is functioning the hot glue might melt

[@Thecarverman]

Might might hahahhaah lol mate it does will its not a matter of if its a matter of when if you do use hot glu place a dab under the potentiomtre and no where epse that way it will never move

[@egorgozdak9767]

Здравствуйте скажите пожалуйста,мне очень понравилась ваша бор машинка! Ваш инструмент! Где вы его покупали, можно ссылку?

[@nicedick4697]

нельзя вась

[@nicedick4697]

на английском спрашивай дцп

[@ganeshmurthy4860]

Excellent.

[@KHOAIHOANG81]

Very Good...!!!

[@delta7id]

Box ukuran X berapa ?

[@dedyadymanurung1387]

Bang,untuk menaikkan tegangan ampernya gmn?

[@VINInvents]

English sir

[@arjochip]

Skema yang 3 pin out donk biar mengukur ampernya terpisah

[@Oshadaindrajith]

Wow🙂

[@matrixredwood4817]

Use screws

[@bobBob-hu6ij]

is this fake ? it was the easiest diagram ever and i did it exactly but doesn't work

[@VINInvents]

Its working really well for me, its a basic diagram you can do yourself.

[@aktivitas5M]

Mas minta tolong buatkan vidio tutorial cara modif PSU komputer menjadi PSU variabe dengan keluaran volt meternya secara digital yg dapat dilihat dan diatur dengan potensio sesuai kebutuhan misalnya 20Volt 4,7A untuk menegaskan laptop dengan memakai konektor universal yg dapat diganti-ganti jacknya. Mohon maafkan saya kalau dalam menyebut alat-alat salah atau tidak sesuai yang seharusnya karena masih pemula sangat membutuhkan bimbingan dari para senior.

[@anderslandgren6745]

I was so curious, but having Huey, Dewey and Louie go BEEP-BEEP-MEEP loud enough to have the compressor roll over and die in agony... Sorry, but I'm outta here ;-P

[@cevinnurhidayat5784]

5itof