DIY PUDDING KEYCAPS / MOD

[@theboredguy]

First check inside of the keycaps, if transparent then proceed or else pls dont

[@shelvaking7088]

What kind of paper did you use

[@theboredguy]

@@shelvaking7088 250 p grit sandpaper

[@saltngash6603]

could i use red dragon k552 keycaps for this sanding method?

[@theboredguy]

Yes

[@nextrix.]

@@theboredguy does it work with gk61 glossy keycaps? its transparent inside

[@diughy]

People: try this with a new set of cheap keycaps that match ur keyboard. So if it doesnt work, you dont destroy ur keyboards original keycaps.

[@MuhammadAli-nd5on]

hey i really want to do this will it work with the redragon k552?

[@theboredguy]

It would work if the inside of the keycap is translucent or white, NOT black. I would recommend you to try it out first on one keycap, ig it works then u are good to go.👍

[@MuhammadAli-nd5on]

@@theboredguy yea the inside of the keys are like translucent, thx. also how will it look if the lights are just backlit? nor full rgb for each key Edit: nvm i just found out that the inside of it is not translucent, i thought it was 😥

[@theboredguy]

Too bad 😞

[@royal9014]

I checked my keycaps and from inside it haves a white plastic i think , so this gonna work or not ?

[@theboredguy]

Yes it will😁

[@AshiqPlayz]

Kids Dont Try This At Home Your Mom is not buying you a new keyboard

[@Henzo1002]

but keycaps that you can buy separately

[@tanmayjadhav1987]

@@Henzo1002 lol thug life

[@theboredguy]

Lol

[@ExpoJuice]

You can just buy key caps why buy a whole board?

[@calistin1]

I suggest using 1000 and 2000 grit.

[@anoobalwaysanoob0866]

Can this work on a white keycaps?

[@user-og5lo]

Will it work on amkette evofox katana?

[@theboredguy]

Most probably, I am also using evofox keyboard. Try sanding one keycap to check, then proceed if it works

[@user-og5lo]

@@theboredguy okay. I'm gonna be buying an evofox katana. Your tutorial was the best I found!! I subbed!

[@theboredguy]

Here is the evo fox keyboard model which I use www.amazon.in/dp/B085366TJW/ref=cm_sw_r_cp_apa_glc_fabc_05HJYB1AS9WXR0RM0WWH

[@theboredguy]

Thnx for your support

[@user-og5lo]

@@theboredguy I see

[@Joey-dl6nm]

Will this work on a k582 redragon? It's a dumb question but I just want to know what I am getting in to.

[@theboredguy]

Yes

[@theboredguy]

The whole process is only to scrap of the black paint from the key caps If your key caps itself is made out of black plastic it won't work

[@bluebear7223]

Do not do this to your redragon there keycaps are double shot which is good but it won’t work with this method

[@jadonrodrigues]

Hey is that a membrane keyboard? If yes thank goddddd

[@theboredguy]

Yeah its membrane

[@jadonrodrigues]

@@theboredguyis there any place that sell differenct coloured keycaps for membrane keyboard

[@theboredguy]

@@jadonrodrigues each membrane keyboard has different layouts unlike the mechanical keyboards, that's y we don't see any membrane keycaps for retail

[@krrishsingh8217]

Will it work on zebronics transformer keyboard? Im not sure please reply!

[@theboredguy]

Most probably cause it's a cheap keyboard, but don't risk it first just try it on one keycap

[@anungla9830]

How to I know my key caps are transparent? (I have zeb transformer btw)

[@theboredguy]

You can just see if the inside of the cap is translucent or black (it should be translucent) If it is translucent then just try sanding 1 keycap for trial (I recommend sanding the keycap which is not noticeable) After sanding if the keycap is translucent through and through , then you can go on sanding all the keycaps 👍

[@anungla9830]

@@theboredguy I have p40 sanding paper shall it work

[@theboredguy]

Yeah no problem, but just don't sand to the point where the keycap plastic itself it fully scrapped off

[@maelsanchidrian2803]

This could work with a double shot abs keycaps ? Thanks for answering ❤️

[@ovrdse_fx]

The keycaps will be smooth?

[@theboredguy]

Kinda

[@officerhugh8165]

What grit of sand paper did you use?

[@theboredguy]

250p

[@jadez1893]

i got the same keyboard ;o maybe i do this btw paper sand grit?

[@theboredguy]

250 p

[@Efeyxa]

I did it and it's very nice thank you very much

[@AshiqPlayz]

this thing is sick should i try it ?

[@theboredguy]

I don't know It took me 8 hours to scrap the paint off

[@theboredguy]

@Bradley Redmond 5 mins

[@xav_supj3292]

Does it work on pretty much every keyboard?

[@theboredguy]

Yes but it should be a rgb keyboard with glowing font on the keycaps

[@bluebear7223]

No

[@bluebear7223]

This won’t work with double shot keycaps

[@cedar4024]

Will it work with double shot keycaps

[@theboredguy]

No Sry dude😔

[@nextrix.]

does it work with gk61 glossy keycaps?

[@theboredguy]

Most probably, but just try first on one keycap

[@carljosephangeles4043]

Will this work on pbt backlit keycaps ?

[@theboredguy]

Yes

[@sweetboss2662]

bruh the paint is not comming down and its think can you help me?

[@theboredguy]

What do u mean by paint, is it the black colour paint on the keycaps?

[@sweetboss2662]

@@theboredguy the inside Side is black and the outside is too and when i sand it it comes thiner and thiner and broke :(

[@theboredguy]

@@sweetboss2662 I am sry, but in only works on cheap keyboards. If the inside is also black then your keycaps is not painted black but the whole material is of black plastic, it only works with transparent plastic Sry it broke😔

[@theboredguy]

If you want you can dislike or unsubscribe🙁

[@sweetboss2662]

@@theboredguy Ohhh nevermind i do it on the key what i dont use becouse my keyboard has blue switches and has rgb and it was 24 euros i mean 30 dollars

[@8.1patinaumarsahupala10]

is it gonna work with rexus mx 9 keycaps?

[@theboredguy]

I am not sure if the inside of the keycap is white then u can. If not then I don't advice u to do it

[@mythical6993]

Do you think this would work on the rk 61 keycaps?

[@theboredguy]

Most probably it will work, but just to be safe try on one keycap first👍

[@shiiraga1111]

Did you try it? I wonder because I have a similar keyboard

[@arknbaris]

is it works with logitech g213 ??

[@theboredguy]

Check if the inside keycap is transparent, if yes try it. Most probably it won't work on expensive keyboard

[@snubnub8257]

Noicee

[@berlincantread]

I also have this keyboard

[@theboredguy]

This keyboard is pretty good ryt

[@nihaalspeaks]

GUYS DO NOT DO THIS, check the inside of the key cap to see if it looks clear, and if it does THEN do it, otherwise dont

[@theboredguy]

Yea

[@vinayakbiranje8978]

#lifehack

[@aaden2626]

This only works with cheap keycaps xD

[@theboredguy]

Yes😂

[@deppalc2471]

dont do this unless your keycaps are doubleshot