DIY Race Simulator Setup - Build With Wood

Watch this video on how to build your own budget racing sim setup with wood. You can get everything you need from the hardware store and be set up to race in no time!
What you will need:
• Exterior 4 inch screws (deck screws)
• Lag screws (to fasten seat sliders into wood)
• Two 5ft sections of 2x4 wood planks
• Six 18 in. sections of 2x4 wood planks
• Two 5ft sections of 2x6 wood planks
Check out our Thrustmaster racing gear from GT Games! Free shipping on all orders across North America for orders over $65. gtgames.ca/
Music used throughout the video:
/ werabbitz
or on facebook at
/ werabbitz
or on KZbin at
/ @werabbitz
This video was originally uploaded by EvlRabbit under a creative commons license. The original video can be found here: • My new Rig!! How to bu...

[@EvlRabbit07]

I'm humbled that you uploaded my video on you channel but a little upset that I was not asked

[@gtgamestv]

I'll be honest, when I first made my channel like a year ago, I was following what other youtubers were suggesting by finding relevant videos with open licensing on them (there's the option on upload to allow vs not allow video sampling). Yours happened to have the license toggled on. Its the only video I've done like this, but its not my style of what I'm trying to do with my channel, so will not doing that again. Sorry for not communicating that back at the time.

[@murrijuana2842]

@@gtgamestv so theft was recommended and you thought "yes, theft is a good idea!"?

[@jmholmes83]

What’s even more disturbing is when I googled looking for a video like this, what came up was this rip-off instead of yours.

[@nierst2541]

​@@gtgamestv saying sorry but still using the video and not deleting. In your place id be so ashamed of myself...

[@_Getknifed_]

​@@nierst2541why ?

[@abdullahlibzo6914]

Thank you for the inspiration! I have a bunch of leftover wood from a past project, and I was thinking what to make with it, and this seems like the perfect project =)

[@user-eo3nw1mm5d]

soooo smaaaaaart !

[@bmlaforge]

Is there any wobble/play going side to side when drifting? could you make it move by hand if you push on the 2x6 on the side?

[@miguelangelrodriguez1447]

I’m going to make for sure one of cockpit like this good hob!

[@fernandorivera3494]

Hi friend! Nice work … have yo the plans? Pls 😄

[@funniersphere44]

ayo why you upload anothers vid?

[@deniskraussner6425]

Hello! Are those 2x4 inches or cm?

[@noneofmybusiness9895]

If this is a serious question, best not try to build yourself.

[@deniskraussner6425]

@@noneofmybusiness9895 🤣🤣🤣

[@sondresvareid5241]

Inch

[@noneofmybusiness9895]

Did you use a saw to cut the wood, or did you chew it off?😂

[@BWB_Cubing]

0:05 why is this a german plate

[@krut2911]

Ha I was a BMW tech…nice build!

[@oczhaal]

With such a build, you should put a disclaimer: not suitable for a direct drive wheel. You'll break or twist the supports.

[@abhishekab1]

It should work with smaller DD wheels, CSL DD, Moza R5 / R9

[@almedasmith4677]

first off, its a stolen video. but second, you do know that this is what they use to build houses right?

[@roberthiggins8234]

@@almedasmith4677 I have never felt a strong DD, but if you look at the premium cockpits they are made from thick steel, much stronger/stiff than wood screwed in place. There is a reason cars are not made from wood. Saying that, I don't think this would have a problem with a 5nm DD, but maybe at 15nm there would be.

[@mrteausaable]

You have over $500 Sim gears, why you setting by making a wood cockpit? You should pair with GT Metal cockpit to look cool.

[@828Drifts]

Dude honestly, not everybody wants to spend hundreds of dollars on a cockpit if what he builds is effective and it works then it's perfect

[@ryanwolski9016]

because looking cool is good for all the "free guys" in the game to see you?

[@capulet6146]

Thief

[@d011ss7]

huh?

[@albertcolon3692]

@@d011ss7 Has video stolen from another channel

[@d011ss7]

@@albertcolon3692 oh ok