These videos are so calming, it’s nice to see that a broken rod can be repaired
@jacobaccurso2 ай бұрын
Purchased my repair kit. Now all I have to do is watch your video 15 more times so I can make sure I perform all the steps required. Thanks for posting!
@connort7874Ай бұрын
Dont often comment on post ive been watching repair videos for the last couple of days after breaking the tip of my fly rod just bellow the second eye and this is by far the best repair method ive seen 👏💯
@pawelsawicki6332 жыл бұрын
You make it look effortless Paul, keep the videos coming, cant wait to see what you tackle next.
@PaulAdamsTheHandmadeFisherman2 жыл бұрын
practice and video editing make up for a few things, cheers
@fishingmasterawesome2 жыл бұрын
It’s so awesome you’re uploading again
@PaulAdamsTheHandmadeFisherman2 жыл бұрын
I try
@brianclark17 Жыл бұрын
Just that easy, eh?! Your work is quite detailed and amazing! Thank you for bringing us into your shop and showing us your amazing talent!
@PaulAdamsTheHandmadeFisherman Жыл бұрын
Thank you very much!
@trampster73062 жыл бұрын
Great video thanks - tidy Job. A mate broke his 15ft Carbon Continental rod about 6" from the tip, and said "if you want to repair it, you can have it". It was a fibreglass tip so no way to put anything inside. I managed to buy a length of Carbon tube near the right diameter to fit over the outside. I had to gently ream the tube a fraction to get it to slide down where it needed to be, and epoxied it in place. That was a year ago and the rod still casts & works well. Stay safe & well - Dave. 👍👍
@PaulAdamsTheHandmadeFisherman2 жыл бұрын
i am always a bit nervous for the first few casts and then I kind of forget the repair over time, nice idea with tube over, thanks
@MicSokol2 жыл бұрын
I did few rods this way, but your work is superb, great to have you back
@PaulAdamsTheHandmadeFisherman2 жыл бұрын
thankyou
@foggy4602 жыл бұрын
You did a beautiful job on that rod. Thank you for a great video
@PaulAdamsTheHandmadeFisherman2 жыл бұрын
Thanks for watching!
@nrfishinman0092 жыл бұрын
Such a pleasure to see a post from you. Hope all is well. Great video thank you!
@PaulAdamsTheHandmadeFisherman2 жыл бұрын
Thanks
@muskybites5052 жыл бұрын
Always looking for something to mix epoxy in, the bottom of a can, brilliant sir!
@stevenquigley42082 жыл бұрын
Good to see you. Hope you are well.
@racl19546 ай бұрын
Awesome. I have a Shakespeare top of the range Boron Match rod from the 80s that turned up new with the handle section broken about half way up. After watching your video I do believe it is repairable.
@eyyupkavalci2 жыл бұрын
"The art of repairing" Thanks for sharing sir..Awesome job..
@PaulAdamsTheHandmadeFisherman2 жыл бұрын
Thanks 👍
@Qasz2 жыл бұрын
Those vids are always so mindcalming, great job on this rod.
@PaulAdamsTheHandmadeFisherman2 жыл бұрын
Glad you enjoy it!
@annebrowne586810 ай бұрын
You're a master of the craft for sure. Great fix for lighter rods but it wouldn't hold fighting tropical monsters like a 80-150lb tarpon.
@PaulAdamsTheHandmadeFisherman10 ай бұрын
this is a lightweight rod so I am using lightweight materials and a lightweight carbon insert, but the principle hold for heavier rods, you need heavier inserts that match the action and more layers of tow, there are companies that do this, for expensive game and fly rods
@aaronk43102 ай бұрын
Where did you get the insert if I asked my dog to step on a rod my kids gave me ? It's not replaceable because of what it means, so I want to fix it
@TJHLURES2 жыл бұрын
Smooth as all heck. Weirdly satisfying to make something that's been broken whole again. tight lines and bendy rods 🐟
@PaulAdamsTheHandmadeFisherman2 жыл бұрын
i know it is an odd thing these days, i always get a few 'throw it away comments' so it nice to hear the other side, thanks
@twofishrexy9182 жыл бұрын
So many useful ideas in 1 video. Thank you.
@PaulAdamsTheHandmadeFisherman2 жыл бұрын
Glad it was helpful!
@SplishSplashFishing2 жыл бұрын
Ha ha - Cool to see you have a whole bin with broken rod pieces - It surely makes everybody realize that you have experience with rod repairs :D Great job on the movie - Classic PA style - Lovely to watch
@PaulAdamsTheHandmadeFisherman2 жыл бұрын
Thanks 👍
@peterhipwell46322 жыл бұрын
Great video you made what I would call a difficult job look easy
@PaulAdamsTheHandmadeFisherman2 жыл бұрын
these can be a fiddly pain in the a**, thanks
@TrensdePesca2 жыл бұрын
Trens de Pesca - Brasil - Trabalho bem executado. 👍🏻👍🏻👍🏻
@sidyajv2 жыл бұрын
Beautifully done.
@PaulAdamsTheHandmadeFisherman2 жыл бұрын
Thank you! Cheers!
@Otodidak72 жыл бұрын
Wooowwww Amazing.... Perfect 👍👍👍
@Otodidak7 Жыл бұрын
thank you, i will contact you on telegram
@RevnedC9 ай бұрын
Great skill and knowledge 👌
@PaulAdamsTheHandmadeFisherman9 ай бұрын
Thanks a lot
@Agar4Life2 жыл бұрын
We missed ya! Hope you're doing well :)
@PaulAdamsTheHandmadeFisherman2 жыл бұрын
yep i am ok, finding a bit more time to make videos, thanks for watching over the years
@felixfanorballesterosubeda55112 жыл бұрын
Exelente campion muy buen trabajo gracias por compartir tus vídeos saludos y bendiciones
@guyb7005 Жыл бұрын
they don't repair bridges this well
@leonelescultor12 жыл бұрын
Casualmente. Vengo llegando a casa de pescar y una barracuda me partió la puntera de la caña y me consigo este vídeo! Gracias!
@PaulAdamsTheHandmadeFisherman2 жыл бұрын
Gracias
@Asal_Lempar_Fishing Жыл бұрын
Amazing greetings from Indonesia🇮🇩👍
@MrKying2 жыл бұрын
Thanks Paul!
@PaulAdamsTheHandmadeFisherman2 жыл бұрын
thanks for watching
@arihawkeyeangler2 жыл бұрын
Wow... fixed... awesome.. 👍
@netoiscas2 жыл бұрын
Espetacular 👏👏👏👏
@nullbrain8552 Жыл бұрын
This is so cool! What is the purpose of the thread here? What if you skipped that part what would happen?
@PaulAdamsTheHandmadeFisherman Жыл бұрын
it is a little bit extra reinforcement and also binds the split ends together
@lennonpresto1174 Жыл бұрын
Incredible job what an art that is! Where do you get the graphite for carbon fiber inserts from?
@PaulAdamsTheHandmadeFisherman Жыл бұрын
these are off cuts, my day job is ina fishing rod factory
@oilageman9883 Жыл бұрын
Just what I need to see. 👍
@codybertram6122 Жыл бұрын
How do you do a one piece if you can’t slide the connecting piece through? Would I be safe just putting a smaller chunk in between and epoxy it?
@omatad2 жыл бұрын
Thanks Paul🙏🏻
@PaulAdamsTheHandmadeFisherman2 жыл бұрын
thanks, for watching
@FishingWithDonSmoth2 жыл бұрын
Great video, do you recommend any particular 2 part epoxy resins for rod repairs?
@PaulAdamsTheHandmadeFisherman2 жыл бұрын
I used PRO-Glu rod building epoxy, for the joint this is a pretty standard 40 minute epoxy i would get whatever is easy for you in small amounts, i used finishing epoxy for the whippings,cheers
@colossalbasscustombaits59632 жыл бұрын
Nice video have you ever tried to wrap carbon fibre over the area where you joined the two parts of the rod maybe for extra strength?
@MaskatuPescaruAmator7772 жыл бұрын
I have put a carbon sleeve
@PaulAdamsTheHandmadeFisherman2 жыл бұрын
yes, i have used carbon fibre tow on other rod repairs, but generally where the break is further away from guide and i don't want to use thread
@colossalbasscustombaits59632 жыл бұрын
@@PaulAdamsTheHandmadeFisherman Ok great stuff!If the Rod's tip brakes like 2 inches from the top what would be the best way to fix it I don't really want to make the rod shorter by cutting it off to the nearest eye I want to keep the original length but the inside hole of the rod is very small and I don't really like to fix it with a solid alan key or a drill bit inside the blank.
@avl19892 жыл бұрын
Wouldn't the repaired portion now get extra stiff and augment the overall rod action?
@PaulAdamsTheHandmadeFisherman2 жыл бұрын
not really, it won't be perfect but to be honest after a few casts you kind forget the repair is there
@Themonsterfishing Жыл бұрын
How many mm for metal rod can put in fishing rod?
@SLINGSHOT332 жыл бұрын
L'idée du fond de la cannette pour le mélange de la colle epoxy est une bonne idée. Je pourrais justifier à ma femme ma consommation de bière lol! Sinon bon travail ! J'ai une canne à laquelle je tiens, hérité de mon grand-père, et je vais pouvoir la réparer. Ça doit être le même procédé pour de la fibre de verre non? Tu as mis 3 couche de colle sur la ligature ? C'est bien ça? Merci pour la vidéo
@chkilou2 жыл бұрын
Bonjour Karl! Tu penses qu’il parle français ?
@SLINGSHOT332 жыл бұрын
@@chkilou Ya souvent le traducteurs automatique sous les questions. Comment tu crois que j'arrive à suivre les commentaires sinon lol, je suis une quiche en anglais. Sinon tant pis , c'est pas bien grave non?
@chkilou2 жыл бұрын
@@SLINGSHOT33 T’as bien raison, qui ne tente rien n’a rien. Un gars dans les commentaires précise qu’il a utilisé cette méthode (avec du carbone) sur une canne en fibre de verre et que ça a fonctionné et qu’il pêche avec depuis un an sans problème. Bon courage pour sauver ta canne !
@SLINGSHOT332 жыл бұрын
@@chkilou c'était celle de mon grand-père. J'ai sorti mes premières perches avec elle. Donc dans tous les cas elle restera au moins accroché au mur. C'est la plus vieille, la moins ''bonne'' comparé à celle d'aujourd'hui, mais c'est bien celle là que je garderais toujours lol
@PaulAdamsTheHandmadeFisherman2 жыл бұрын
la bière est bonne. Si la canne à pêche est creuse, cela devrait fonctionner si vous pouvez mettre un petit morceau de tube à l'intérieur.
@zemi.j.282 жыл бұрын
Hello👍wasn't it enough if only the area where it was broken was covered with thread?
@PaulAdamsTheHandmadeFisherman2 жыл бұрын
probably, but it was very close to the guide foot so it was easy to wrap up over the guide foot
@wayneautomotive1 Жыл бұрын
Perfect
@mattgehrke Жыл бұрын
Sorry if this is a dumb question but what's the purpose of the thread?
@PaulAdamsTheHandmadeFisherman Жыл бұрын
it covers the break and any lose fibres and with the resin adds reinforcement, thanks for asking
@officialWWM Жыл бұрын
Where do I get that carbon filler rod you used?
@PaulAdamsTheHandmadeFisherman Жыл бұрын
ebay, or another broken rod, or a rod builder
@jojobunny6540 Жыл бұрын
hi is there a way to pull back the blank from the rod after you glue it together, mine kinda not straight and i want to make it straight 🤔
@PaulAdamsTheHandmadeFisherman Жыл бұрын
warm it with hair dryer and pull
@jojobunny6540 Жыл бұрын
@@PaulAdamsTheHandmadeFisherman Thx very much 🙏
@Chinhnguyen0497 Жыл бұрын
can I use the epoxy resin for guide on this?
@PaulAdamsTheHandmadeFisherman Жыл бұрын
Yes you can!
@Arabian_Gulf_Angler Жыл бұрын
Awesome.. Now give me your address so i can send you three of my broken rods 😂
@Bang-Yos-Giawa2 жыл бұрын
Terbaik memang
@PaulAdamsTheHandmadeFisherman2 жыл бұрын
terima kasih
@BboyGetSome Жыл бұрын
When doing that, do you lose sensitivity in the rod?
@PaulAdamsTheHandmadeFisherman Жыл бұрын
i would of thought so but in use it is not something I have noticed
@BboyGetSome Жыл бұрын
@@PaulAdamsTheHandmadeFisherman okay. I was gonna do the same for a rod I bought from Japan that broke during Shipping.. I was just wondering how your experience with it was before I tinker
@Aidansmith-fi2ek4 ай бұрын
do you offer rod repairs??
@Domi19882 жыл бұрын
awesome
@WhizFlipper2 ай бұрын
Okay that’s perfect cool cool
@ireknemo244910 ай бұрын
Super 🎣
@GTAITBiz-pg4on Жыл бұрын
Do you sell?
@PaulAdamsTheHandmadeFisherman Жыл бұрын
No sorry
@Nag.Nag.2 жыл бұрын
🙋 🙋
@sergeykorobeynikov88032 жыл бұрын
Огонь!
@PaulAdamsTheHandmadeFisherman2 жыл бұрын
маленький огонь
@piaoliang54672 жыл бұрын
All that epoxy costs more thsn the rod. And time is not free
@PaulAdamsTheHandmadeFisherman2 жыл бұрын
maybe that's the price of enjoying myself
@muratuskan01 Жыл бұрын
Süper
@apxcaim3n77011 ай бұрын
😮😮😮😮
@MaudBoyd-p8yАй бұрын
Hernandez Charles Davis Edward Hernandez Paul
@pjroyse4 ай бұрын
Could just buy another rod ……..just saying
@FerminaHaddenProakzmia25 күн бұрын
Johnson Gary Harris Jennifer Martinez Jose
@MegaChoo2 Жыл бұрын
So that is what the bottom of soda cans is for.
@PaulAdamsTheHandmadeFisherman Жыл бұрын
apparently, i only figured this out lately
@michaelshadwick3487 Жыл бұрын
Please excuse my skewing, but I see that you have a decade of experience. Have you ever considered reposting some older videos to get more bites.. I mean new viewers?
@PaulAdamsTheHandmadeFisherman Жыл бұрын
It is an interesting question, and i suppose i go with what i am enjoying doing now, and what i can fit in between the all the other stuff i have to do, like a job, a family, and occasionally some fishing. Editing is probably the hardest part of making any video and takes a lot longer than filming, so with many older videos it might just be better to start from scratch. A lot of the things i used to do i would probably not do in the same way as like everyone else I am learning as I go. Thanks for a thought provoking question, cheers
@VenetoBall9 ай бұрын
JUST BUY ANOTHER.
@YEET-fe3fw5 ай бұрын
no
@richraven3828 Жыл бұрын
All that for a fake repair that completely changes the action of the rod?
@АлександрШершнёв-р6с Жыл бұрын
Теперь не буду выбрасывать банки пока не использую их под эпоксидку!)))