DIY Repair Liquid Damage A1466 MacBook Air 13" Logic Board - No Power Efi Chip

[@HumanSagaVault]

The best DIY repair video of MacBook Air here in youtube. Good job!

[@zayneali3148]

Thanks man. I ordered a battery thinking that was the issue. Turned out it was not. I followed your video very carefully, .. I cleaned a few spots on the back of the motherboard with just Isopropyl Alcohol and a soft bristle brush. A few spots that looked a little corroded. Without a doubt the fan kicked on to my surprise, and the light on the charging cable turned back on. This video saved me a lot man thank you. Very much appreciated!!

[@JaySityLL]

video's instructions*

[@fixapplenow]

Glad to help!

[@starboy001]

This video seems quite legit... Everything done on camera without even a single cut of video. Thanks man...

[@fixapplenow]

Sure, Thanks

[@diegosoars]

Followed step by step, it was just the same. I used Isopropil (just a little and allowed some dry time) to clean the board. Put it back, checked the voltage values, they got it all back. Thank u. Very well explained video.

[@JaySityLL]

Verbs and nouns: verbs are high pitched nouns are low; nouns are after verbs. " a vėry bīg dęal." Checking , the voltage. Checking the voltage, : Check; could have 2 definition's.

[@thierryemonet8005]

thanks. I was able to fix my son's water-damaged macbook air following your instructions

[@robertc.3578]

Thank you, you helped me solve a problem with my client's laptop. Hugs from Brazil !

[@martinberry1040]

I'm looking at my sons Macbook Air - identical to the one in your video. It seems there are two problems evident: 1) the SSD is not being recognosed at all - it's a 512GB Samsung blade 2) the battery is not recognised as being present I have restored the OS (Yosemite) to an external USB hard disk and the machine boots. Apple Diagnostics tells me there is a problem with the battery and a storage device. Great! Apple Service Diagnostics (ASD 3S156) says pretty much the same. It does not indicate mothernoard problems and as I say, it boots. I don't mind spending money to fix it, but don't want to spend it on the wrong stuff. Naturally I don;t have spares to play around with. It suffered light liquid damage. Anyway, your video gives me some things to try. Muchas Gracias :-)

[@sahara2183]

Update?

[@monnombre6547]

you should try the smc reset he did at 00:30 ... that worked for me for symptom #2. my adapter's light wouldn't turn on, the battery wouldn't hold a charge, immediately turn off i disconnected the adapter ... however when i reset my smc, for some reason i had to turn on the device 1st then hold the left shift/control/option + power button. that did it.

[@amnaibrahim4062]

Thank you so much!!! I was able to fix my MacBook air following your instructions.

[@theankushjain]

What tools and accessories did you buy?

[@isa720123]

Hello im planning on using your method to fix my macbook, thank you for the upload. Just to clarify, I would separate the parts carefully, look for corrosion and then clean it out with pure alcohol and a toothbrush and then let dry it for 48 hours before turning it back on? If it doesnt turn on after the cleaning do i need a new logic board? Also what is that blow thing you used in 16:13? Sorry for all the questions im pretty unfamilar with computers and dont want to mess this up. If all goes wrong and it still doesnt turn on would i be able to send it to you guys to fix it? Apple is charging me 700 dollars and i dont have that kind of money. How much would it cost for the fix?

[@fixapplenow]

hi, sorry for a late response. yes alcohol at the beginning is good. you don't need to wait for 48 hours before turning it on though. a few minutes is enough. the tool you mentioned is the hot air station. if cleaning does not work, a board most likely can be repaired. a complete replacement is the last option if we do a board repair, we charge $300 thank you

[@rrafie01]

Thanks for sharing this video. After getting $570 repair quote from apple I saw your video and bought the tools for $7.99 from Amazon. now I fixed my son's Macbook Air and it is working better than before.

[@fixapplenow]

Very nice!! Keep up the good work!!

[@ticketman299]

Hell yeah am sick of people ripping other people off for there own self greed scumbags glad you fixed it and didn’t give away 570 dollars god bless for real honest people out there now I gotta do the same thing and fix mine too 😊

[@GrowMoneyWithAI]

At 2:43. If your fan worked after plugging in, what would be your next step? Or what issue would that indicate?

[@rkvt]

Thanks for the video.... I messed up two big things: I put battery back in and didn't screw it down... then when I re-removed the bottom panel the battery stuck to it (the little plastic tab in the center of the bottom cover) and this pulled the battery connector off the logic board. I persevered w the water repair... also screwed up the speaker connection (didn't pull it "UP")... I found corrosion on the board once i got it out... cleaned it w denatured alcohol (It was only wet for 24 hours and I had it drying without case within 12 hours). Fan is on so power is getting to it but won't turn on... I am going to leave it for 24 hours and maybe clean again. I am also going to pull SSD and try in another MacBook Air (older one) -- this one is 2017 and not even paid for.... One thing to suggest: coach on the connectors a bit.... pull this one UP (I wish I'd read the comments that said watch out for speaker connector). Battery connector was just bad luck as I've not had that happen w MacBook Pro I kept running for years after a cup of tea was spilled on it. THANKS AGAIN. I can't do the testing/solder cleaning but still I gave it a go. I might try to have the board repaired by a shop... I guess we will see.

[@harrissoncrown5419]

K

[@rkvt]

@How Not To I had to send it out to get the board replaced. A bunch of $ but it's still running w the new board.

[@josecastro3292]

One of the best videos , Thanks !!!

[@ASantanaAR]

Great Video...I removed the SSD Board as you did but when i plug the power cord the fan does turn on! What does that mean and what would be my next step?

[@fixapplenow]

It might mean that the ssd drive is bad

[@ASantanaAR]

@@fixapplenow ok so i took it somewhere to get fixed the told me the logic board, screen, and battery are shot, they tried charging me $800 to fix, i told em fU i found the most awesome video on youtube, cleaned her up, booted her back up, working like a champ... 1 Issue though, please help, when i unplug it, it shuts down, what steps could i take to figure out this Issue? thanks alot...

[@IMGROWN3232]

@@ASantanaAR new battery needed

[@GrowMoneyWithAI]

I have same issue! I’ll let y’all know if replacing ssd works. Thank you!

[@topalecom]

Great video ! Question.. after you put it back together and tested the keyboard was the WiFi con disabled? Or enabled ? Do we need to do anything for the wifi card to be detected ?

[@topalecom]

I followed your video for cleaning purposes all went well, but now the wifi icon is grayed out and Bluetooth works perfectly fine . On system preference under network state says disabled and when I press the activate wifi nothing happens. Any idea 💡 what could be happening ?

[@kristoferandepin7927]

may i know what is the tools did you use to open it at the back from philipinnes thank you

[@ScottDCole-bc6df]

Thanks for the great video! I was able to tear my MB Air down, find the corrosion on the flip side of the mother board, clean it up, and that did the trick! Back in business !

[@IMGROWN3232]

What is the frosting like substance you put on the logic board at 15:17? Thermal Compound?

[@sbyseven]

It is FLUX probably amtech 559

[@brandonfarfan1978]

This vid is really informative. Thanks.👍

[@ateotech]

greate video, where did you learn all this stuff? is there a specific carrier for this stuff?

[@maximilian200057]

I want to know myself.

[@nidhiwairagade48]

How do we know if Logic Board is still working when Mac won't turn on?

[@cagataybilim1234]

thanks for your video. I just fixed my macbook air by following your video THANKS ALOT

[@fixapplenow]

Dave bilim great news!!

[@haileyperalta2368]

Dave . &hub vccvvv

[@josephbrennan4622]

Brilliant Tutorial Sir, I enjoyed every min of it, I don't know if anyone as mentioned but your mike goes off when the scope is on. Regards

[@fixapplenow]

Thanks for the feedback.

[@fitsumdinberu638]

Thanks for this great tutorial. My MacBook air (A1466) has got liquid and it is not turning on. The fan however does start whenever I plug its power cable. Can I reasonbley assume that most part of the logic board is ok and focus on the SSD?

[@NicleT]

Thank you so much. I’m running into the same MBA with similar symptoms and was about to soak the logic board in an ultrasonic bath. But I’ll take a closer look around this bios chip.

[@airwaybill2000]

Hi NicleT, I am on the same case, mine died for no reson and don't turn on anyway, do you have the pin out voltage references I should mesure? This is not my professional area but I am electronic engineer and I would like to give a try to fix it, if you ahve and can share I appreciate here is my email [e-mail], thanks man!!

[@NicleT]

@@airwaybill2000 hey! Werner, i can send you the boardview which contains all the schematics and the board. Tell me, what’s the logic board part # so I can send you the good one. Cheers

[@MrCoolblue383]

Do you know how to go about ordering a new logic board? I need to replace mines but I want to order the correct part for my unit

[@squadrajohn]

ifixit is a pretty good source

[@CaseyKCRichards]

I spilt coffe on my Mac air 2017, I handed it the incompetent - these people just take your money and he r no clue . My computer when turned on flashes as if telling me it’s the track pad. Anyone with similar experience and recommendation of who can actually fix it without telling me “ oh you need a new mother board .” Email : [e-mail]

[@r.mercado9737]

While observing your surgical strategy, it was, at times, difficult to see the key manipulation and at one point it went blurry. Was that done for a reason? (Rhetorical.) Also, where did you buy the non-marring tool?

[@alleywatch22]

Top repair video on macbook air thank you

[@horacenicolas9871]

great video! just wanna ask my fan is not spinning when I connect the magsafe to the port, the magsafe color is amber

[@janmina77]

Horace Nicolas same issue here

[@MrPnew1]

​@@janmina77 The biggest problem with these is the DCIN {audio} board so try a known good one of each first. If not, start watching some Louis Rossmann videos

[@JosSerrano11]

I have a question, what is the cable at @3:54 ? I broke that one off

[@b4dblueb0ys]

Keyboard backlight

[@JosSerrano11]

Rizla:# thank you!

[@lloydmurdock7349]

Apart from the lighting and audio issues, great video.

[@fixapplenow]

thank you

[@TheAnalystradioprogram]

Always a complainer. Try something positive Lloyd. And his audio and lighting were just fine.

[@darrenmckeown990]

My daughter recently spilt a bit of water on her MacBook Air. We left it a week to dry. The MacBook works fine but it won’t charge, no light appears on the charging plug? Any suggestions. When I opened up the MacBook one of the battery water sensors has a red dot on it, can these batteries be replaced

[@joshoverfield-recio1520]

I had this same MacBook that had coffee spilt on the keyboard on for repair today and in the end it just needed a new trackpad. Thanks for the video that gives a good step by step strip down!

[@fixapplenow]

thank you

[@jumpinghighest]

Great video! Where can I find what the voltages should be at certain points? Is there a schematic that I could get? Thank you!

[@fixapplenow]

You’d need to read the part number of your board and google the schematics for it as well as the board view file. Thank you

[@defcon9998]

BEST VIDEO EVER!!! ❤️❤️❤️❤️

[@isacingfeldt134]

Wow! Followed this tutorial and it works! Thanks!

[@allisonmeggison320]

really what kind of macbook do you have? what year is this macbook air in the video

[@cfcnuevavidavideos]

@@allisonmeggison320 he said mid 2015

[@zayneali3148]

Mid 2013 here. Worked perfectly just using isopropyl alcohol and a soft bristle brush on a few corroded spots on the back of the motherboard. My tips for anyone who tackles this self fix is to be patient. Do not force anything, and be organized!

[@qriminaltv]

I found some corrosion above the right 1RO 50416 (the on you measure at 7:56) and cleaned it up, but it is a little bit rusty. Then I checked the bios chip's pins just like you did and they all worked fine. I plug the power cable back in like you do at 10:15 and after 2 seconds the fan makes a spin and stops again. Any thoughts?

[@mehreenakhtar5892]

Hi. What buttons did you push to turn the macbook on without using the power button?

[@starpath2007]

Thanks for the video - repaired after water spill - full working order. Did not try a reflow, cleaned with acetone then noticed you used alcohol so I switched. I never imagined I could get this repaired until I found your video. folks be careful with the speaker connectors. they pull straight up and NOT out. Pulled the connector off the board. doh! soldered it back down? not clear the one speaker side works now. If I am indeed missing the sound from that speaker, I might try to hard wire/solder the wire to the pads. any better ideas / approaches are welcomed. Thank you thank you.

[@fixapplenow]

thank you. well, that speaker is a few $$ on ebay. or you can solder the wires to the pad

[@stephenhall3515]

The SSD pins on these can also corrode or feel loose in the SATA connector.

[@josskorvus3428]

Absolutely fascinating

[@Malenedeik]

Great video ! Thanks for posting! Managed to fix my Mac after water damage , toothbrush is very efficient ;)

[@fixapplenow]

Malenedeik nice!! Good news!!!

[@carapungo]

what did the customer decide to do at the end?, and how much did you charge for this job?. Thanks.

[@r.mercado9737]

Not bad at all! Your presentation was great!

[@brettlewis5157]

Great video brothers I have one need to replace keyboard got it to boot up disconnect battery not logic board boots up works but keyboard is not working only some keys work....

[@brettlewis5157]

@How Not ToYeah my keyboard was no good replaced it all good now!

[@MBrulla]

Really great video - . By chance, where did you get your pinout/expected values for the SMD? I'd be especially interested in the Voltage and Ω readings and which resistors are in the main power chain. Cheers!

[@MBrulla]

@Michael Araya What? I'm not looking for someone to fix my device - I was looking for the schematics. I was able to find them after a bit more searching, however.

[@GrowMoneyWithAI]

@@MBrulla where did you find them?

[@anon12416]

@@MBrulla could you please provide me a link with the schematics

[@MBrulla]

@@anon12416 If you google the exact board (not the model, the board itself) you'll find them pretty easily. The A1466 is available pretty widely online. For instance, the was working on at this time was the 820-000165. You need that number to get the right board.

[@smaccgang]

Where are you located and how much you charge for a repair ?

[@pavanraj9018]

Hello , i followed this video and my macbook air has now started working . But it works only when the charger is connected and also now the batttery is not getting detected and charger light remains orange all the time even if I disconnect the battery . Ideally if there is not battery connected the light should go green .. Please let me know what needs to be checked here , may be a video would be helpful

[@djemimoussanga1887]

Hello, Guy i want known what liquid did you use on the power box in the middle of the video?

[@starboy001]

27:26 "reading the properly battery" 😂😂😂😂lol

[@ThraxHouseMedia]

At 7:38 I dont get 8.6 volts , Im getting 8.0 on the left side but when I check the right side its 7.2 volts.... Any suggestions on what to look for ??

[@wadeolsen4463]

Thank you, I had an identical problem and was able to fix it in an hour. Thanks a bunch

[@fixapplenow]

Thank you! Glad to help.

[@rakeshmehta8418]

My laptop is not turning on and adapter light also not lighting up.below i'm giving accidental history Once water was spilled on it but after 1-2 months later its fortunately turned on and after that i have used it for 6 months and so. then i shifted to a place which was quit humid. And after using it for 10-11 days there,one day it was not running smooth so i pressed restart button and its never turned on after that. I also diagnosed it and they told me that smc system have some problem Any help?

[@obedvega4886]

Rakesh Mehta , 0

[@ialbarenque]

Great video! Very clear. In my case the adapter's light won't turn on. I haven't had the chance to try it on a different laptop. The laptop only turns on when I press the power button connect the power adapter and keep pressing the power button for 5 seconds. The battery won't hold charge. The laptop would immediately turn off if I disconnect the adapter even though it doesn't show any lights. Any thoughts?? Thanks again!

[@fixapplenow]

The board needs to be inspected up close. Might be some corrosion somewhere

[@monnombre6547]

i know this is a year late ... but this happened to my macbook pro 2013 and i couldn't figure it out so i did the smc reset at 00:30 ... that fixed my issue. my i had the same symptoms you did ... my adapter's light wouldn't turn on, the battery wouldn't hold a charge, immediately turn off i disconnected the adapter.

[@monnombre6547]

p.s. when i reset my smc, for some reason i had to turn on the device 1st then hold the left shift/control/option + power button. that did it.

[@RafaelLSM]

Hello. I have a similar A1466 which got liquid damage. The laptop is back on but the battery won’t keep it on if the charger is disconnected. Battery is fine, everything is fine but the energy from the battery won’t go through the computer to keep it running. Any clue on where it could be the problem??

[@fixapplenow]

Rafael LSM look for any corroded components. It can also be the battery. How do you know that the battery is ok?

[@pepperjackshack2439]

What was the first chip you tested? Mine has 8.60 in but goes to 14 out then drops. Think the chip is bad. Has lettering 4R7 440 Z32

[@junger613]

hi there, thank you for your video. which screws did you use for this particular one ? pentalobe 5 ? please help. thank you

[@fixapplenow]

chaim junger if you are talking about the bottom ones, then yes. Those are pentalobe

[@junger613]

thank you. which number ?

[@fixapplenow]

chaim junger must be p5

[@junger613]

thank you man. you rock. have a nice one.

[@paolahancock8073]

1 QQ1Fix Apple Now

[@naomi1673]

I wonder where I could learn to do this kind of thing

[@down2earth485]

youre already in the place to learn it

[@CharlotteBeasor]

Misses spilt a bit of champagne on hers, tried all the resets and PRAM but nothing worked just the fan. Took it apart and cleaned the logic board with rubbing alcohol using a toothbrush. Once all back together came on for ten mins then died again, I was gutted. However next day came on no problem and so far has been working fine. Massive thanks to you for this video as I would never have tried that.

[@fixapplenow]

It’s our pleasure! Thank you

[@gabbybonn2652]

Nice! If this doesn’t work what’s the next option apart from a logic board replacement ?

[@fixapplenow]

Just inspect the whole board close up. Also check the dc board and the flex cable connecting it to the main board. Make sure there is no corrosion and nothing get super hot. If still can’t find anything, then you have two options: sent it in for logic board repairs or replace the board. Thank you

[@keysey20]

This was an excellent video

[@ronamo111]

what keys were you hitting for reset

[@mohaargurpreet]

Thanks for the video. I fixed mine. I was too lazy to get 99% alcohol so used drops of crown royal , lol. After cleaning the corrosion, it did work fine

[@fixapplenow]

Good to know that our stuff helps ))) thanks fro sharing your experience

[@Alexcounterman]

but.. crown royal isnt 99% alcohol and has sugars in it that could damage it?

[@Yahkobah]

@@Alexcounterman ya it fry up on him in few month

[@JavierMaldonado_n2jkw]

Can you use "QD Electronic Cleaner" with these boards?

[@mitze888]

My MacBook Air A1466 2014 is having the same problem but there's hasn't been any liquid damage. In 2016, two years after purchase, the logic board was replaced by the Apple Store. Now, two years later, its dead (green goes to amber on the power cord). Took it back to the Apple Store. The tech said the logic board needed to be replaced again. Her supervisor said the power board. Not sure which, but it's doing the same as the one in this video.

[@fixapplenow]

Usually these boards are pretty stable. Only fail with some external damage(liquid or shock) Maybe it’s a fault refurbished board from Apple

[@airwaybill2000]

Thanks guys, good video, well done

[@said86]

Thanks mate, with your video I was able to rescue my macbook. Never expected this would work.

[@fixapplenow]

Thank you

[@dj_tony_sparkz]

you were a big help. thank you soo much bud

[@gibo588]

wHAT DID you do air heat gun to re solder the bios chip?

[@marockano5129]

wich kind of alcohol volym do you use when to clean it?

[@fixapplenow]

99%

[@robertolara1114]

So when I read my voltage on my MacBook Air early 2105 min 7:39 I get a reading of 9.2 volts is my case any different? Also reading for 11:11 pin 1-3 I get .6 volts any idea ?

[@robertolara1114]

And history of MacBook i purchased it from a guy , said it wouldn’t turn on and it does seem like it had a slight liquid damage , water damage indicator that’s under screen ribbon was pink no other water indicators pink or red, logic board seemed pretty cleaned still decided to clean it with rubbing alcohol and toothbrush but not getting any luck, didn’t see any signs of corrosion

[@jaspereb9156]

Hey, hi, what microscope do you use in the video? Kind regards

[@lautarolunesu4034]

*M1ne was unlocked thru hackinglord0 at IG the expert I know*

[@Lxxxlo9]

Hi man, I have an 2015 early macbook pro, and I just put it to charge and the charger began to sparkle. My MBP turned off and won´t turn on again, do you think that It could be fixed?

[@alfredkevarkis2324]

Good job, thank you for the information 👍

[@highlander1387]

that's just a reflow for those chips, right? No chip was replaced? Thanks

[@mahmoudabdelmonem4517]

Hope u can help my. Please iam living in egypt have the same model went to sleep and can't wake up because of nvram issues what can i fo please

[@msweett3]

What type of screwdriver is required for this job?

[@fixapplenow]

Can you be a bit more specific? Please

[@pevensielavere22]

@@fixapplenowNow Great video, thank you! Which screwdriver are you using in the video? I had the same question as Matt Sweett. I heard you said it in the video and it started with an "A" but when I went back to hear the name again, I couldn't find the right spot in the video. Could you please put the name of screwdriver below that will unscrew the back of the MacBook? Thanks so much! :)

[@peace8859]

Hi, thank you for this video. Is a 70% IPA okay to use on logic board? I spilt coffee and there is a clear coffee streak throughout the logic board. Also the battery doesn't charge

[@DannyDeroo]

Hi, great video made some progress on fixing a macbook from a friend, but now still stuk as follows: when battery connector is in, no charging and see for a fraction the empty battery symbol on the screen (when powered in). When I disconnect the battery from the motherboard, I do get the startup sound, but then only a very dimmed apple logo in the center of the screen... can somebody help?

[@michaeltitus6847]

Excellent video!! Thank you!

[@dylanyespersen]

Great tutorial, thanks! What to do do if the pentalobe screws located in the bottom case are damaged and don't move? That's my case :(

[@MiRaje8086]

Samee

[@dylanyespersen]

@@MiRaje8086 I'm so sorry mate

[@MyRandomNick]

Which screwdriver set would you recommend to purchase?

[@e.s.m2884]

*Massive gratitude to HACKINGLORD0 at 1G he help me fix m¡ne*

[@kapilchoudhary2487]

Sir my macbook air 2018 model is not turning on. Please suggest me some solution. I have already tried SMC reset and all other methods.

[@optimizelogicrepair2784]

Good video, great repair. Nice job sir.

[@jackcurrie389]

so if i need my mac repaired how do i send it to you guys

[@dragoncity17]

Hello, Great video. I have the same problem, miss some voltage like 3.3V..5V...like you ! do you change components ? Or just past flux and hot air ? Thank you in advance ! :)

[@KilleR_ZonE]

Hi excellent video.but now i am getting a black screen with faint logo?any advice thanks

[@wilbur131094]

What’s that solution your pouring into it when it’s under the microscope?

[@iTsAdRiXx]

It's called FLUX :)

[@paulcostelloe5345]

Fantastic video

[@DrWenChannel]

How about if I can turn on, but the touchpad and the keyboard was not recognized and are not functioning? How can I fix it? Thanks!

[@dramaqueen12396]

Thanks for the video! I spilled water on my MacBook Air and it won’t turn on but there was a light when I connect it to the charger, I cleaned the logic board with isopropyl alcohol, now I see the fan is spinning but there is no longer any light on the charger and it still won’t turn on, what could be the issue? Could it be the flex cable?

[@fixapplenow]

Yes, see if you can try the flex and a different dc board

[@dramaqueen12396]

Fix Apple Now now there’s is a green light that turns orange and the fan spins (sometimes stops) but it still doesn’t turn on, do you think the logic board is the issue? Thanks

[@ronaldddoooo]

@@dramaqueen12396 do a smc reset

[@ronaldddoooo]

@@dramaqueen12396 go to this link: www.quora.com/My-MacBook-Pro-wont-turn-on-The-light-on-the-charger-flashes-orange-green-What-should-I-do

[@jaredmatagi971]

What's the tools you use?

[@maythunder9205]

Did the same thing (cleaned logic board & trackpad with isopropyl alcohol) to my macbook m1. The thing is, it’s not turning on. What could’ve gone wrong?

[@steveho9884]

Where did you buy screwdriver?

[@florinlupascu1816]

many thanks i fhave fixed main and its working again

[@fixapplenow]

Very good!!! Thank you

[@salomenaskidashvili8230]

okay. I spilled water on my MacBook (same model) I turned it off, cleaned up all the visible water. then I shook it upside down. after that I put it on the heat radiator so that keyboard was on the radiator (I had no hair drier at that moment and the radiator was not too hot or something) it was like that for about half an hour. after that I put the laptop and didn't turn it on for a day (so that the air would dry the water drops if there was any) and I turned it on after that. I'm typing from my MacBook now. SO HERE IS THE QUESTION :D Are we okay? :D I mean should I worry that it might stop working or it survived?

[@debbiegrim1462]

Hi I have a MacBook model # 1534 when I turn it on it goes to a file envolope with a question mark on it can’t remove it help please

[@tiagodacunha_]

Hey! I have a MacBook Pro Retina 13" Late 2013 that I spilled water on it. It worked out fine after that and I cleaned every water I saw and thought it was everything fine. Now I tried to power it on and it happened nothing. I opened it up, and I saw some water, most on top of battery, tried to clean, unplug the power management, plug it again, tried to connect again and it started beeping. I'm in panic, and I don't really know what to do... Didn't see the red dot that says it's damaged the logic board, so I have a little hope with that. What should I do? Please help me :/

[@whyugottaknow6433]

Tiago Da Cunha I think you should go to the apple store to get that checked out.

[@tiagodacunha_]

xiopax x we don't have any Apple Store here in Portugal :/

[@whyugottaknow6433]

Tiago Da Cunha Aw that sucks.

[@whyugottaknow6433]

Tiago Da Cunha maybe you could try Apple support and see what they suggest.

[@fixapplenow]

Yes, looks like it needs to be check by professionals. There might be some corrosion under ram chips, or around ram controller.

[@polabangladeshi8244]

How much is it to get it fixed

[@andypeterson2126]

My Mac book air has water damage and won’t turn on. How much to fix like you did in this video ?

[@tgrimshaw]

1500 dollars US