DIY REPTILE HIDES For Smaller Species | 3 Different Designs!

*GIVEAWAY IS CLOSED*
How amazing are these?! We absolutely love creating these unique hides for our animals. I hope you guys make your own! 😊 Feel free to stick around for more by hitting that SUBSCRIBE button and give us a thumbs-up if you did!! XOXO
DETAILS:
Materials Used (TOTALLY UP TO YOU!):
1. Foamular 2x2 Project Panels - thd.co/2yaCJCL
2. Hot Wire Foam Factory Foam Fusion Glue - bit.ly/2x9yXcB
3. Great Stuff Gaps & Cracks Expanding Spray Foam - thd.co/2CeFpAq
4. Varathane Polyurethane Water-Based Sealant Spray (Crystal Clear Satin) - thd.co/2xbcETI
5. Polyblend Sanded Grout (Light Smoke) used with any brushes you’d like - thd.co/2KygxLv
6. Master’s Touch Acrylic Paint Tubes used with any acrylic paint brushes you’d like - bit.ly/2RzmCHT
Tools Used (Not linking anything because again, it’s TOTALLY UP TO YOU!):
1. Measuring Tape
2. Dremel 4000 (Has varying speeds & a flexible extension shaft. As seen in the clip, we also use a spiral bit, a bit-removal wrench, a router bit, and sanding bands)
3. Xacto Knives
4. Sharpee Marker
Steps Taken:
1. Drew a rough sketch.
2. Cut out individual pieces from the foam to create the hides’ structure.
3. Labeled and glued each piece together.
4. Weighed down hides with slate tile and left to dry overnight.
5. Filled any gaps with spray foam, if needed, and let dry.
6. Shaped hides using Dremel tool. Router bit was used for rough cuttings and detail work. Sanding bit was used for gentle cuttings and sanding of every surface.
7. Covered hides with 3 layers of grout - allowed to dry for a full 24 hours between layers. On 3rd layer, smoothed over brush strokes for a sandy texture.
8. Painted hides with acrylic paint.
9. Sealed hides with 3 layers of spray sealant - allowed to dry for 1 hour between layers and a full 24 hours before exposure to the animal.
Dimensions of each hide:
Dome-style Hide: 8 inches in diameter (8 inches long, 8 inches wide), 4 inches tall inside, 5.5 inches tall outside, opening is 3 inches, weighs 19 ounces
Corner-style Hide: 8 inches long on both sides, 8 inches deep from opening, 11.5 inches across the front, 4 inches tall inside, 5.5 inches tall outside, opening is 3.5 inches, weighs 18 ounces
Log-style Hide: 7 inches long, 7 inches wide, 3 inches tall inside, 5.5 inches tall outside, opening is 4 inches, weighs 13 ounces
Come Follow Us!
Facebook: BB's Beasties
/ bbs-beasties-924345681...
Instagram: bbs.beasties
/ bbs.beasties
Twitter: BBsBeasties
/ bbsbeasties
***We have a wide variety of animals in our home, including reptiles, amphibians, aquatics, & more, so if you have any questions about them, their species, or their morph-type, feel free to COMMENT BELOW!
Links & Affiliations:
Arm the Animals Clothing (Use code BEASTIES10 to save 10%! Every purchase gives back to protect animal welfare!) - www.armtheanimals.com/?tap_a=4...
Feel Free to Contact Me!
Email Address:
[e-mail]
Mailing Address:
Bridget, BB’s Beasties
P.O. Box 984
Cuero, TX 77954
Music:
Exhale - Jeremy Blake
Bovi - The Grand Affair
Copycat - R.LUM.R
Stranger - VYEN
Watch Me - Geographer
(KZbin Audio Library)

[@XJunixAnnexKayxScarX]

Okay, I’ve watched a ton of DIY hide videos, and I would 100% say these are the most impressive, and in-depth. The funny thing is I already have almost all the tools for these because my spouse does model railroading and uses these tools to build and decorate their layout.

[@BBsBeasties]

Keirstyn Karolyi thank you so much!! That’s amazing! 😍😍

[@jadesjungle]

“Gentlemen. Make sure you vacuum your beard” Classic 😂 id love to make fake boulders and slate pieces for my flat rock scorpion like this to give him a natural but safe habitat should he knock anything over 😊

[@BBsBeasties]

Jades Jungle yes!! I’ve found that these are pretty hard to knock over and are relatively light, so I think that’d be great!!

[@amarie9288]

This looks ahhhhmazing! Definitely something i want to do in the future. Tip, as a nail tech i can understand the dust issue, but you can find a way top prop the shopvac hose to the side or above (few inches away, no more) the hose while you're drilling to avoid so much mess at the end. Much love!

[@BBsBeasties]

Ashley Marie thank you so much!! Yes we’ve done that when we made hides inside the house 😂

[@JPtheGamer650]

Just wanted to give my little personal tip - I used to use the Dremel to shape the piece, but I’ve found in my experience that using a hot knife, or even a soldering iron to melt and cut away any excess is a lot easier to clean up. Using the Dremel would make a huge mess whenever I would use it. However it’s still my took of choice when sanding down minor imperfections. I just wouldn’t use it to remove a lot of material.

[@BBsBeasties]

I totally agree and we’ve since changed up our method! Way less mess!

[@connerhein2868]

How do these hold up over time? Do you have to worry about the grout chipping?

[@AlphaDelle]

They look AMAZING. You’d never guess they were a DIY. 👏🏻👏🏻👏🏻

[@BBsBeasties]

Thank you SO MUCH!!! My husband will definitely appreciate that compliment lol

[@LyssasLizards]

Corner hide for suuure! Love the structure of it and so would my Hog Island Boa, Hazel! :)

[@tawanamahoney4850]

Loved the dome style best! I would use it for my crested gecko Houdini.

[@BBsBeasties]

Tawana Mahoney what’s your Instagram hun?

[@tawanamahoney4850]

@@BBsBeasties my instagram is Tawana Mahoney. Let me reinstall it right now

[@_jamm___3321]

the hide for cheeks was so so inspiring, i had a vision of a sort of modern flinstones house style enclosure for a new little beardie but no idea how to start, these videos are amazing and help so much to bring my desert aesthetic to life while still being suitable for my lizard friend, thank you!!

[@ChantalsCritters]

I really like the log hide.

[@Darkos.]

Awesome. Thanks for the tips

[@hellakittyroxi]

Thank you so much for sharing with us. I’ve been looking for a diy hide for my hamster that isn’t wood or paper material. I’m definitely going to be building the corner hide with a platform and ramp

[@Upper_echelon_exotics]

This gives me a really fun idea! Thank you!

[@HannahPage]

I absolutely LOVE this! They turned out fantastic!

[@BBsBeasties]

Thanks girl!!

[@JessicaHill09]

This is amazing! Thank you for the video! I'm trying to my first diy hides for my snake and getting overwhelmed trying to figure out how to do it. This makes it so simple!

[@brandilambert7586]

He definitely is an artist!!!

[@myownmasterpiece8788]

These are some awesome d.i.y. hides, great job!

[@vanyagoldsmith5263]

jeez, these look better than store bought hides!

[@BBsBeasties]

Vanya Hulm thank you! 💜

[@lanadeaton5588]

I would love to have a go at making a hide or two for my Froggy babies. Thank you for sharing how you make them. One day I might pluck up the courage to try making a hide!

[@BBsBeasties]

Lana Deaton so exciting!! Glad I could inspire you! 💜

[@patrickcollins2579]

Definitely the very best Hides and Enclosure setups I have seen on KZbin

[@BBsBeasties]

Patrick Collins thank you!

[@gabbiesartsandcrafts]

Yay! I am so excited to see the video!!💜

[@BBsBeasties]

thanks girl!! I love your support so much!

[@gabbiesartsandcrafts]

They're all super beautiful😍!! But my favorite is the Corner hide I would use it for my leopardgecko Ti amo 😄 and great video It was super inspiring!!

[@ashscichlids7057]

This is awesome! My fish would love something like this!

[@BBsBeasties]

Ash's Cichlids you’d probably have to find an aquarium safe sealant, but I’m sure these would work for sure!

[@krystaalese8067]

Love the video!! I have been debating on what sealent to use. I bought a grout a mortar sealer, but im not sure if i should just use an acrylic sealer instead.. im paranoid about it being toxic

[@annashobbies4350]

Great DIY. I love them. This is a wonderful video. Thank you.💕🐡💕

[@BBsBeasties]

THE COVE thanks so much!!

[@kendylrouthieaux2029]

I’d have to say he IS an artist 🙌

[@mitch1285]

im building a custom scene for my tank and this is the best video i have watched. Best proccess and best outcome for the job

[@jankokisak3369]

I love your videos soooo much

[@ragan9757]

Your videos are so well put together, you’re very well spoken and the hides look fantastic!! Good job for realsies

[@BBsBeasties]

Ragan thank you so much!!

[@matthewjones6319]

Great video!! Made a jumbo sized corner piece for my Colombian boa for his new 125gal tank, since the biggest size hide was super expensive and still not big enough for the snake. Wish I could share the pic of the finished product, thanks again for the amazing vid

[@BBsBeasties]

Matthew Jones that’s amazing!

[@Everettalla]

This is very creative, amazing job, Bridget! :)

[@BBsBeasties]

Toaster895 Aj thanks!!

[@peterjambor8162]

What sealant have u used on end?it is reptile safe?what total end cure time before allow to put to vivarium?are sealant safe to be used as basking spot? Thank you

[@lifeoftony2361]

Very impressive!

[@BBsBeasties]

Life Of Tony thanks so much!

[@titustracy3342]

All 3

[@dericksteward1067]

I love your videos 😍

[@kennethyoung141]

I adore the log style one! My leopard gecko David.Copperfield an eclipse. You know how to Make hides fun! Would love it for my baby

[@kevinkabaio3224]

Can I use silicone spray as water sealant?

[@hopestorey6961]

The corner style for my super giant leopard gecko 😍

[@BBsBeasties]

Hope Storey what’s your Instagram hun?

[@hopestorey6961]

BB's Beasties @gizmo_the_gecko_19 and my main is @hope18._

[@alisonoxholm9315]

these are the best DIY hides ive seen you have a very talented hubby , you should sell these

[@BBsBeasties]

Alison Oxholm thank you! Maybe someday ;)

[@bellaarroyo8844]

Nice job keep up the great work

[@BBsBeasties]

Cristal Arrroyo thank you!!

[@bellaarroyo8844]

BB's Beasties np!!!!

[@donteague614]

Nice hides. You could use pond foam it would last longer. You do say the gaps " need" to be filled, why? The gaps are actually benefical. How? You may ask. Well the gaps would be voids to filled with grout to act as an anchor. In fact you could put many small holes say 1/4" in diameter, and deep all around the surface. The thinner the grout the more likely it will crack and fall off. Great ideas non the less.

[@cynthiaarguilez1832]

❤❤❤

[@johncoleman7308]

At 15:10 you say he’s not an artist but this sure looks a whole lot like art lol

[@nofalfaal6638]

Thank's to this is video 🙏 Im from indonesia😀

[@nkbnikhil8212]

Can we use these hides in a humid enclosure? 😕😕😕😕❤

[@SCORPIUS.98]

Random but love your lip colour with those frames

[@BBsBeasties]

Thank you!

[@RebZoomer]

Would it be safe to cut the foam with a hot wire? I keep tarantulas and I want to make some scenic backdrops for their enclosures but I don't want to risk fumes hurting them

[@kellyeckley5829]

Would this be safe for button quail?

[@malakdourra]

Hello! I was wondering if these had some good weight to them, I'm thinking of making one for my ball python but he tends to flip his hides over so I wanted to make something he couldn't flip over easily.

[@kirahishi]

what do you use to disinfect it? can it withstand diluted bleach solution?

[@Foreverbabironi]

Why'd you use spray sealant versus the pain sealant from the last build? Is it better?

[@cjs_zoo2838]

The corner hide for my baby bearded and then one of my leos when she outgrows it!!

[@cjs_zoo2838]

My insta is caityg4792 forgot that part lol

[@mandapanda3270]

Hi, I’m new to ur channel and I just wanna say I love ur videos.. you explain everything in detail so well.. You guys should sell ur hides, I would totally buy some!

[@Owlcopettube]

Great video, Im super interested in making my own reptile hides in the future! I have a question though, How long do you wait until using the hides in your reptiles cage? And have you ever PH tested your hides?

[@BBsBeasties]

Owlco thank you! Once the sealant has cured for 24 hours, it’s perfectly safe but I always wait at least another 48 before adding it to the enclosure :) And I’ve never pH tested them. Is there a reason why they’d need to be tested? Lol

[@Owlcopettube]

BB's Beasties I think the ph test is of people plan on putting it on water or if it’s going to contact water! Thanks for your response !:)

[@BBsBeasties]

Owlco ahh I see lol I didn’t initially think of that because I personally don’t use these in my aquariums! I would imagine it would be similar to using other ornaments. It may alter the pH by a tiny bit but probably nothing drastic :)

[@denzchannel888]

excusme, what kind of paint do u use? the light brown one. thank u

[@BBsBeasties]

Denz Channel the color of the hides is due to the grout. The paint he used for detail is acrylic.

[@lillyortiz5355]

Love the Corner one for my snake. Do you sell them?

[@BBsBeasties]

I’m sorry, I don’t! They would be too expensive to ship and we also have a baby now, so free-time isn’t very frequent 😂

[@UmbreonLuv1]

How would you clean these? Could you scrub them clean without any of the sealant or paint coming off?

[@BBsBeasties]

UmbreonLuv1 I’ve never had to scrub mine because they’ve never been pooped on, but I’m sure they could be scrubbed gently. Just nothing super abrasive. Because I found it does flake a bit when I accidentally bump it or scrape it against something. I just clean mine with my regular disinfectant!

[@rooszoo408]

These are amazing! Great job! Do you think they would work for invertebrates (tarantulas, scorpions, etc)?

[@BBsBeasties]

Roos Zoo absolutely!! The only difference would potentially be the sealant used. You may need one for more humid environments. The hides in this video can hold up to humidity but aren’t meant to be used in SUPER moist environments if that makes sense. We used an indoor sealant on these specific hides but an oil-based sealant meant for indoor/outdoor use (if allowed to totally and completely cure before introducing it to the animal) would work best for those types of environments! Depending on the husbandry of that specific invertebrate :)

[@rooszoo408]

@@BBsBeasties Awesome, thanks :) I'm from Australia though, so would have to find an alternative to both. Also was the foam EVA or like styrofoam?

[@BBsBeasties]

Roos Zoo it’s more like an insulation type foam! The type I use is made with polystyrene resin, if that helps. It’s pretty dense.

[@420kellyk]

I'm making one of these right now. What kind of spray sealant did you use? Is it better than painting on polyurethane?

[@BBsBeasties]

Kelly Kearney yay!! It’s the exact same product as the paint-on polyurethane, it’s just the spray version :) we prefer it because it makes the process 10x faster and it’s much more even and smooth! But both work perfectly fine!

[@avetborisovich3479]

👍👍👍

[@ProfJCsCritters]

My leopard gecko would love that corner hide.

[@BBsBeasties]

Jen Lee what’s your Instagram? :)

[@ProfJCsCritters]

Alas, I don't have one. :( Do I miss out?

[@BBsBeasties]

Jen Lee I need a way to contact you. Is there another platform you use?

[@ProfJCsCritters]

@@BBsBeasties You can email me at instructor j c lee at gmail... without the spaces. I won a thing! :)

[@sarahbuddin6843]

I would love to make for my bearded dragon. What measurement should I use for an adult dragon. Also thinking to do for my ball python. Any ideas on the measurement for her as well.

[@BBsBeasties]

Sarah Buddin that’s going to depend on the size of your enclosure and the size of your animals, honestly. For the dragon, make sure they can fit comfortably, without having to curl up their tail. For the ball python, make sure they can fit snugly, without being totally squished. Hope that helps!

[@ChargeCannons]

Is this safe for fish and or semi aquatic amphibians

[@danaantoine6234]

I freaking love the hides! Your instructions are impeccably easy to follow... I'm just lazy. How much??

[@teddz4562]

mans really killed the fly with the dremel 11:39

[@ms_minna]

I know this is an old video but I had to take a chance and ask: would it be safe to make hides for geckos from natural clay? (Meaning not polymer clay or anything like that)

[@anotherhuman3866]

I know you didnt ask me, but yeah I use air dry clay I bought on amazon and if you read the ingredients and ensure its non toxic you're fine, especially because you are sealing it at the end anyways making sure it clearly states its non toxic is probably the most important thing though :)

[@robertasmerker4589]

I know you have posted this before but what kind of Styrofoam do you use again?

[@marketaspelinova5356]

is something I can replace the Polyblend Sanded Tile Grout?

[@BBsBeasties]

markéta špelinová that’s just the brand we use. Any sanded grout will work!

[@sewghosty]

I would love the corner hide or the dome hide for my little leo Occamy! He LOVES to climb and those seem amazing! IG and Twitter @sarcasticghosty

[@davidkilby1043]

Also, you can use air dry kids clay and chicken wire from the hardware store

[@rodrigodeavila3372]

Hi! Would you say it'd be safe to use the same technique to make a water bowl?

[@BBsBeasties]

You absolutely can, but I would suggest a different sealant! You'll need something that's meant for submersion in water, like aquariums. There are many to choose from, so definitely look into them and get what would be best for you :)

[@rodrigodeavila3372]

BB's Beasties thAnk you!

[@shadyabyss1739]

Hello, I’m very interested in trying this method for making my own hides. As I think your video is amazing, but I was curious if you could maybe answer a few questions I had first? I was reading up on the sealer and it said it was not intended to be put in pet cages. I was wondering if you have ever had any problems with it affecting ur reptiles after it had dried, has ur geckos tried to bite the hide and been affected by the sealer in any way, or would you say it’s safe to use? Also, sorry last question, do you think this would hold up and be fine in a more humid tank for ball pythons? Thank you for your time and this helpful video!

[@BBsBeasties]

Shadyabyss thanks for the feedback!! I haven’t seen any issues whatsoever with using the sealant in my reptile enclosures! Once it’s fully dried/cured (which takes a minimum of 24 hours but I always wait at least 3-4 days), it’s perfectly safe! And none of my animals have tried to chew it! As far as humidity, if it’s for ball pythons, it’s probably fine, as that is more of a 60%-ish range, but if it’s for a much higher humidity environment, like having a constant humidity above 70-80%, I recommend the exterior sealant which is more oil-based :) The sealant I used works very well with humidity spikes but probably not for constant humidity.

[@shadyabyss1739]

BB's Beasties Can’t wait to try and make some hides! Thank you, you are very helpful!

[@BBsBeasties]

Shadyabyss awesome!!

[@gavinjolley8044]

To continue this question, ive waited 4 days and theres still a light smell and ive washed it and everything, thin i should still wait to put it in?

[@reaperundergroundexplorati2232]

Do you think the varathane would hold up to the 50-60% humidity for a ball python?

[@BBsBeasties]

Jared Greene it would for a while but it would be better to get an exterior sealant meant for outdoor use :)

[@infosemenit2561]

Is it safe for snake?

[@Sam-rt6hy]

Corner style, for a young ball python I’ll be getting soon! When he gets too big (or if he already is) I’ll use it for my leopard gecko! He absolutely loves hides. My username on Instagram is Samsfishies :)

[@JeremyGoneWildPets]

I love this so much! The dome style is easily my favorite. I’d use it in my new custom snake enclosure. Like I said on IG. @jeremyswildstudio of course. ;)

[@keziah001]

Dome style for my corn snake. When she gets too big for it I’ll use it for my tarantula 🙂 @kezi.kat

[@ellesreptiles]

I love them so much! You guys did such a good job on them. My favorite is the corner hide ♥️ I'd use it for one of my leopard geckos. Or my corn snake. Or a future animal. Haha instagram: elle.622

[@BBsBeasties]

Elle's Reptiles thank ya love!

[@TheFurryFriends]

Wow!!! I just got to watch your video now finally and your husband is super talented and what a good sport he is. I don’t think my Mike would wanna go through all this LOL! But that being said I am @the_furry_friends on Instagram (duhhhhz) and I would love the corner hide - now that I am seeing it I would say it would def be for my leopard gecko.

[@BBsBeasties]

He IS a good sport lol Sometimes I wonder if he'll every say no to this stuff!

[@isp042684]

I know I’m late for the give away are you gonna do another one I need a corner hide for my beardie 😁

[@BBsBeasties]

LOL! I'm not sure if and when we'd do another giveaway quite like this one, but we do plan on starting up an Etsy shop at some point to sell them!

[@isp042684]

BB's Beasties ok cool I’ll be looking forward to it.

[@BBsBeasties]

MzRelly it’ll take us a hot minute lol we can also do requested hides if you’d like one soon. Message me on Instagram or Twitter if you want!

[@papachieexotics3497]

can i use styrofoam instead of the foam you used?

[@BBsBeasties]

Yes you can! I just prefer the denser foam because it makes less mess lol

[@aarondehart1060]

Has anyone used these for fish aquariums?

[@asadmalik1806]

Is this waterproof

[@spongebob3261]

this is amazing but it cost 5 days!

[@koofdome]

Can I pay for you to make a corner one?

[@kaylaricard5879]

I would want the corner style! And I’d either use it for my african fat tail gecko or my foster uromastyx! My insta is @artsyflamingocreations

[@sammyrt4396]

In all abt how much does it cost?

[@BBsBeasties]

I calculated about $5 a hide! The initial cost of everything is a bit more, of course, but we can get several hides within everything purchased and then they’re each super cheap at the end of the day!

[@courtneyrobinette793]

Corner style for my whites tree frogs 😊 robinettes_menagerie 💕

[@mindlessabby9434]

can you make a video about making diy fake plants

[@BBsBeasties]

Mindless Abby the only way I know to make diy fake plants is to use a clay base and add a lot of different fake plants into it, which I certainly can do :)

[@derekcharles7007]

I tried this but the grout rubbed right off ... how did yours turn out after ?

[@BBsBeasties]

Derek Charles did you apply the grout to a textured surface? It will not stick to smooth foam.

[@derekcharles7007]

Yeah I did the same with the dremel and sanded the foam ...

[@BBsBeasties]

Derek Charles do you mean that the grout rubbed off the foam without setting at all or it chipped off once dry? I’m very confused here.

[@acommonkestrel]

Love love this! Hubby needs to wear a mask though, my throat hurts just looking at that stuff. 😅 I think the corner hide would actually be great for my hamster, Voltron. 💕 insta @WonderPetChronicles

[@BBsBeasties]

WonderPetChronicles YES! He’s such a stubborn man! 😂

[@phatmama29]

Are these materials- paint, glue, grout, gap filler, etc. safe for the reptiles? I think these are so awesome! Job well done! I just always heard you have to be careful with glues, and such, as the fumes are bad for reptiles. I'm guessing they are ok though....

[@BBsBeasties]

Phat Mama yes! As long as the materials are fully sealed and the sealant has been left to fully cure for a few days, you’re good to go! If there is still a strong scent, leave it to sit longer :)

[@phatmama29]

@@BBsBeasties Awesome! Thanks so much! Love the DIY!

[@carlycook7447]

@@BBsBeasties could these same materials be used to make water bowls as well? I'm trying to find the best material to make some neat looking water bowls.

[@BBsBeasties]

Carly Cook we haven’t tried that just yet, but definitely go for a different sealant :)

[@carlycook7447]

@@BBsBeasties what would you recommend? I've never made anything like this before, and I can't find good natural looking bowls that are big enough for snakes to soak in.

[@brittanyjohnson3746]

Do you have a video of the corner beardie his?

[@brittanyjohnson3746]

Hide I meant sorry

[@BBsBeasties]

I don’t :/ we didn’t record that one. But it’s the same exact method. Just way bigger lol

[@brittanyjohnson3746]

BB's Beasties ok thank you. I really like these. I’ve been searching for ideas.

[@BBsBeasties]

Brittany Johnson thank you! I wish you luck! 💜

[@brittanyjohnson3746]

BB's Beasties last thing I promise. Do you know about how many squares of foam board it took for the bearded dragon hide?

[@aqfayeanggarwidi2506]

what is the danger, please answer?

[@greylong8254]

I mean this looks really good but like, wouldn’t be cheaper to just buy one?

[@BBsBeasties]

Raven Long absolutely not. A hide this size would cost $20 or more at the store. These hides cost around $5 total. And they’re custom, meaning no one else has them, and they were made exactly how I wanted.

[@greylong8254]

BB's Beasties dang ok

[@BBsBeasties]

Raven Long it’s worth it! And all the materials we bought can make several hides! :)

[@jess090]

I would use any of them for my Leopard Gecko Orville. I dont have Instagram tho so no way I would win😕

[@BBsBeasties]

Emily Jesse I’ll toss your username into the hat and if you’ve won, you can contact me through my email!

[@jess090]

@@BBsBeasties Thanks!!

[@kaitlynbottoms310]

Corner hide and I would use it for my bearded dragon Cora! 😊 Instagram is kbottoms11

[@willowwhelchel4447]

I could use the corner hide for my bearded dragon Dovah!! Insta is willow_rayee

[@katywatson8196]

Fantastic video, just about to start this journey 🤔 because we have just inherited a adult Leppard gecko 🙄, my hubby is a builder ! Good with his hands 🤭and the tank we got with him is not suitable for him now. This is the way to go, making a unique living environment 👌 thank you for your videos! 😘

[@tobythehamster3180]

Am i the only one looking for a hamster hide diy