This was such a helpful, calming, and satisfying vid. Thank you!
@k24fd2r Жыл бұрын
Great job, do you use minwax clear coat after applying the wood stain?
@EweJinTee Жыл бұрын
Thanks! Yes I did. A few coats, I think 3 or so.
@k24fd2r Жыл бұрын
@@EweJinTee thanks for the response. Do you sand after the first coat? If yes, how many grits sand paper do u use? I just done applying the oil stain. Need to buy the clear coat tomorrow. Haha
@EweJinTee Жыл бұрын
@@k24fd2r Yes sand from rough grit to smooth. Completely up to you but I think i sand until 800 or 1000 grit. tthen apply few layers of clear coat
@k24fd2r Жыл бұрын
Thanks brother! I just done mine. Keep it up!
@SeattleDinghyer Жыл бұрын
a heat gun and a scraper is the best way to remove laquer and varnish.
@scuderiazane47232 жыл бұрын
What type of "varnish" did you use over the stain. The wheel looks to have a high gloss which is more than you usually get from stain alone. Thanks.
@EweJinTee2 жыл бұрын
Hey. I used Minwax Wood finish natural and then polyurethane to seal it off. You can get it here: Minwax polyurethane: amzn.to/3RQYM8p Minwax Wood finish: amzn.to/3M4FH13
@scuderiazane47232 жыл бұрын
@@EweJinTee So you applied by hand with a cloth? Also did you use high gloss or satin finish? Thanks.
@EweJinTee2 жыл бұрын
@@scuderiazane4723 Yes I did. Just wipe it and let it dry over time. The polyurethane finish is the glossy and dries completely.
@kamzelezinski768010 ай бұрын
how does it hold up after a year?
@tupapirafa2 жыл бұрын
Excellent job, congratulations! How would you recommend me to restore the black line? I just got one old Nardi but it has one piece of that line missing.
@EweJinTee2 жыл бұрын
Hi! Thanks! What I've seen people do was before you apply any wood finish, be sure to use paint marker or oil paint to sort of 'touch-up' the lines. Then once it's dried, go over it with a wood finish and seal it off. That should work great in my opinion. Good luck!
@Willis-de5hx Жыл бұрын
It didn't lose its shape
@EweJinTee11 ай бұрын
Nope shape still maintained
@savrose-7563 Жыл бұрын
I have I think the same wheel how do I get rid of just small scratches?
@deantaylor33975 ай бұрын
Sanding them with 1500 grit sand paper. He showed that
@deantaylor33975 ай бұрын
Why didn't you polish the aluminum after sanding it. It would have looked even better 👍
@EweJinTee5 ай бұрын
Tried rubbing it with Autosol. Doesn't change the look drastically. So I just leave it haha