DIY ring from a nut (with common tools)

In this video I'm making a ring from stainless steel nut with common tools only. There I try to explain all steps involved in process of creation 'DIY ring from nut'.
/ koss_workshop
/ kossworkshop
------------------------------------------------------------------------------------------------------------
Music by Epidemic Sound (www.epidemicsound.com)

[@tombz1451]

this actually has common tools unlike other videos lol :D

[@ShitskaterNoah]

"I'm just gonna slap this on my ring mandrel"

[@theplaylistguy6818]

Literally lmao 19 bucks at Home Depot for a husky file set and good to go

[@user-wc7vn6uz9h]

Yeah a couple vids I've seen some dude had "common tools" in his title and was using a God damn power hammer and cnc machine

[@elgorriongordo6528]

@Alexandra Chico bot

[@DexterMorgan]

Sure, but who wants to file a nut until retirement age when you can go buy that tool in the video to speed it up?

[@LucidDreamer54321]

I left the threads in my ring so it will stay on my finger more securely. I twist the ring onto my finger and then torque it to 30 inch-pounds.

[@eddfitz2680]

Very good job and just using common tools you know we don't all have fancy workshops with all the latest tools you done a great job

[@richardcraniumdicksinn3959]

I liked the idea so much I made one out of a brass nut from a faucet I replaced. Took a couple hours to make, but at least I was at work when I did it. Turned out quite nice. Even got a couple complements on it. Thanks for the cool idea .

[@Camulus777]

Love it. Great work. I've seen other ring makers so this using a dremel tool. I like watching yours so much more. The only other video I have seen that is een remotely as cool is one where they forge a nut into a ring.

[@Cezair1047]

what made me really wondered the brightness in finishing!! unbelievable !!! this is a real artist

[@anthonyhektor3723]

Here’s a tip for anyone trying this on their own, turn the nut 90 degrees in the vice and do all the filing sideways. This will keep the nut from bending/distorting if you clamp it too hard if your nut is made from a softer metal like brass. Being able to have the nut tightly gripped will also help if you’re running into problems with it moving as you are filing

[@asmrbroccoleader]

Ohhhhh yeah! i want to start making jewlery for the first time and it seems that I found the right project to take on! thank you~!!!

[@rickydyess8869]

I have one of those my dads friend made him 40 years ago. Wont fit my finger so i keep it on my keychain in memory of my dad and his friend... Glad to see people still making them..

[@SMoneyT]

Yeah it's a lost art & also credit to KZbin that we got to see the process of its making

[@eiris6595]

My eye : Did you see it? My brain : Yes. I think we can do this My hand : *YOU CRAZY GUYS*

[@gonk_ch]

my wallet: *hell no*

[@aeislugh]

Dude, that is absolutely gorgeous and I just want to congratulate you on having way more patience than I do.... though I now kinda want to try this myself (goes looking for files and a good bench vise)

[@jayparkin6832]

Here i am at 00:55 with school starting in a few hours watching a random man create a ring out of a bolt. Makes sense😂

[@susansmith574]

A nut not a bolt

[@thedukeofskull1383]

About 18 years ago I turned a socket wrench part from craftsman into a knights ring, the round part of the socket. I've seen rings like it in the stores from $100 to $200. I tryed to polish it with cloth for a couple of years 😋.(I worked 3rd shift and didn't get the rest that I needed thanks to some step "kids".) Years later I finally got it polished right. I used different emry cloths and then once a week I would use auto polish for chrome.Then I would use silver polish on it and then buff it with an old sock. Now it shines brightly in the sun. I also do this for my swords and knives. 😀

[@edphillips9064]

He can make a ring from a nut. my dad can make a disappointment out of a nut

[@dumb2ducky]

damn. 😞

[@tylerbowers6378]

This video got my like right away because using a file for something like that must have been a huge pain and no belt sander as well extra pain

[@jewelrycraft7006]

Beautifully made. Keep doing the good work.

[@garyfouse8561]

TY. Haven't tried that yet. Made rings out of spoons coins tokens washers bamboo various other woods - metal

[@weightsandgames5051]

Looks awesome I'm looking for things to try on my down time at work and this is perfect

[@theriversexperience9383]

When I got up this morning making a ring wasn't even in my top 50 of things that I wanted to do... now its like number 3... this is gonna happen this week.

[@allens9573]

With a little patience almost anything can be made with Files

[@edwhatshisname3562]

Cool ring. Hey could you tell me what kind of energy drink you used to sand and polish that ring so quickly? You must be must really popular with the ladies.

[@inverted311]

“I am the clit commander!” 😂

[@nocomp8537]

He's methed up 😬😏

[@chuckles7874]

This is my favorite passed time! I love to make rings out of nuts! The key is to get your nuts inside something ring shaped to get them the shape you want.

[@nikabichinashvili4038]

Hey koss I made 3 of those rings and sell them to my classmates thanks for sharing your skill

[@kalvinnaidoo4034]

Plot twist:he actually did it in this time and is the flash

[@mikepoint4983]

That is pretty cool , keep up the great work and thanks for sharing . Cheers

[@SkullJewelry]

Very cool. If people only knew how much time it takes they would appreciate their jewelry even more :)

[@Cultureclips_]

SkullJewelry.com I payed for it

[@arkadijskulackovskis839]

really nice work,it came out really beautiful!!!

[@omis8092]

this dude got tired making this , and he got a good looking peace of art , good work sir!!

[@codychappuis4186]

Verry nice, an inspirational peice for shure, thanks for the vid. Keep up the good work!

[@therandomisedman9848]

Although the music was shit, the video was very interesting and I can’t wait to try it out. Thank you for the inspiration

[@justincase2281]

That nut never had a chance!!😄 Good job!!

[@dukunsantai2397]

This is really common tools you're using and it turn out beautifully handmade ring,well done:))

[@Koss-channel]

thanks

[@rajeshjhorwal7451]

Very nice you have made with common tools that's good

[@ASMRMukbangeatingsounds168]

The finishing is incredible.

[@pratikjain1755]

You diserve tons of like Everything is made from hand Wow man You r awsm!!!!!!!👌👌👌👌

[@DeplorableDiabloK9]

That's Nuts!

[@GamEmpire1]

Thank goodness this video is sped up to x200. Otherwise we'd still be watching.

[@alfsCreateRestore1122198201]

I'll make this from nut with ordinary earing, to ring of my daugther, because you inspired me

[@mariolegrange4447]

It's kinda like a single finger knuckle duster. Looks awesome

[@rakeshnakirekanti1281]

Very Nice work I would love to have that ring.

[@carlibrown1208]

Beautiful and good work

[@FCTANK]

Nice, I'll use a lathe for the iner part and a dremel for the outer side of the ring, good job bro

[@eerotihtonen1095]

What is this comment section??? People complaining about the music, people saying their rings are better, people asking what tools to use when they clearly are shown in the video

[@kodabear2270]

Eero Tihtonen but what are the name of the tools

[@eerotihtonen1095]

@@kodabear2270 Man I don't teally know :/ I think a file and a saw and sandpaper?

[@EctoGamer]

dude lol I seen 1 comment saying that "my ring is better" and only one who is asking for tools, but a lot of people complain about the music, so you read 2 comments and decided that

[@jaspertipper9649]

It said I can have 0 t Ngfull advantais 100 word, a file, sandpaper and a hacksaw and possibly metal polish

[@olhamartynyak8740]

Dude, GREAT job!!!

[@sp.ghidansp9434]

Amazing job , Respecting to you ..

[@maxsmeraldi]

Great job! Again more with a gem !!

[@nevaya6011]

once you file out the inside... its done.

[@shua_ae]

thats a stunning ring

[@bryanmeza9974]

Bad ass bro! I love it.

[@hunterdawson1677]

I did only I used a grinder in stead of the saw and it looks awesome

[@leoelectronix6302]

Congratulations on your patience

[@danielmurray7682]

Leo Electronix he deserves a prize aye 😂

[@johnsweeney6072]

I say well done to get that quality by hand shows talent and I have no doubt you can use power tools just as well. Kids with a vice and simple tools could give it a crack. 🇦🇺👍

[@ahsan07amaze82]

Good work,bro!

[@loulahope6636]

I made one by myself and give it to my boyfriend he was so happy and surprised what I have done 🤗

[@sifatsharif806]

I liked your video it's was awesome and you made it buy hand no use of machine it was awesome

[@aaronhazlett]

I gotta hand it to you. That first minute was IMpressive.

[@LordSStorm]

Thanks for the video, I would have liked to have seen annotations of the tools.

[@ianboard544]

This was a project everyone did in 8th grade shop class - using only hand files. It was actually pretty cool.

[@The_Joker_]

The speed of those hands!! 😮😮😁

[@Thesidingsworkshop]

That's dedication ...... wow

[@ryanhagge7695]

GREAT JOB, NICE/FUN MUSIC!!

[@jasonadler36]

Can you detail the different grits you went through? I'm trying to get a higher shine on my own ring.

[@oleg79]

Улыбнуло. В юности в 90-х делали так же. Прям ностальгия.

[@oskarkjr9193]

this video is nice mate i started selling rings for 10 pounds then i bought power tools and then just builded my brand op now im selling rings up to 100 to 200 pounds

[@redneckadventures8272]

I make the rings to and selling them but I don’t know a good place too sell them yet

[@davidalonzo9536]

Instagram bro

[@user-sr8jx3ui4n]

Very cool,good job.

[@Heather22056]

Great job.

[@murrayk2828]

this looks exactly like the ring my grandfather made before he died and he gave it to me. Obviously he made it years before this video but it still is crazy how much it looks like his ring

[@darrentylor5473]

Yeah I lost the same ring but mine was sterling and from Mexico...

[@karinaleles1004]

Excelente trabalho meu brother! Like👍BRASIL

[@toddstewart9922]

You can also buy brass and stainless nuts to use. Brass looks good.

[@TheFeroz080]

Like nd comment for your hardwork man... u nailed it ;)

[@yulia_romanova_]

Wow I like it!👍

[@sas-q-watchingbigf0076]

This was xactly what i was looking 4 ☮️💪👍🤘

[@ferrefrederic35136]

Superbe bravo, merci

[@grahamwilson5427]

My god people like to complain 😅 nice work bud

[@thomascossa1583]

True ay it’s a KZbin video get over ya self guys

[@wildmanstudios6534]

I imagined four of these welded together with a support on the bottom to make steel knuckle dusters. Of course you could always pour them too.

[@TheRoadhammer379]

Very effective knuckle dusters.

[@jimmyrustler8983]

Awesome work. Using a softer Brass nut of the same size would likely speed the filing/cutting process up somewhat. Also, consider using some cutting fluid when cutting with the hacksaw, it'll make cutting a lot easier, and swill some of the steel chips out of the way, stopping any wandering. Also, use pieces of bicycle inner tube to secure stuff in vice jaws to stop your work from slipping. 🤙

[@med8615]

Thanks for the tips! Will be using these for sure

[@jimmyrustler8983]

@@med8615 For precise, delicate sanding too, look up sanding sticks either on ebay, or at a local model making store. 👍

[@ammaadisrael5371]

@@jimmyrustler8983 a decent seeming human being on KZbin. 👍🏽

[@clickbait9948]

Respect, bro your fucken patience you bought my respect

[@huseyincengiz3344]

Tek kelimeyle, mükemmel. Tebrikler dostum...

[@siham7010]

*Really Awesome.....Love From PAKISTAN......*

[@axerxes3981]

Koss.... Outstanding.. incredible!! Terrific job and beautiful craftsmanship! How many hours did this take you??

[@AndyAshes]

Love it!

[@the_light_skin_king9369]

how long did this take in real time

[@kristijancvetkovich1154]

Black Dynamite about 2-3hours

[@Dexter-te1yy]

Perfection 👌🏾

[@saberboukelmoune445]

Hi. You should've left the inside last so you'll have a smaller surface to work on. 😀

[@BSTRIPLE7]

amazing. well done

[@adamsfire]

Great video. I do have one concern though: I would have liked to see you finishing the inside edges of the ring. If someone were to follow your video, they may not realize with all of the work of sanding that you were doing, it would leave a razor edge if not dealt with.

[@nphillips80]

Impressive! Thanks!

[@user-zn7oi9ro8o]

Красиво получилось!!!!👍

[@abidchoudhary240]

thank you sir .

[@opiate_warrior1474]

This music feels like an LSD trip

[@imitacoesdojosecarlos4054]

Muito top Gostei muito parabéns seguem imitações do José carlos ouro Branco MG

[@lunchbox0666]

Awesome stuff

[@GabiFodorrasRO]

Big like!👍👍👍👍👍✅💪Felicitări! Great video 👍👍👍

[@Mikeybcoolasf]

i am totally trying this

[@amirhosseinketabi7798]

Nice and useful

[@abhaasmith1985]

Question is how did you keep it from rusting? My first one rusted when I wore it for 5 minutes

[@michellealtieri370]

I love it!

[@obetelTv]

Thanks for that project. For how much will that ring go now please?

[@daddydoc1115]

Would it have made sense to normalize it first? I'm not sure if a nut is hardened or not but if it id then a quick normalization followed by a heat treat after may be smart. Great video though!

[@alfsCreateRestore1122198201]

Wow amazing