DIY RPM LEDS FOR SIMRACING

DIY LEDs indicate RPM for simracing. You can mount it on every steering wheel.
Check all my projects on my website:
www.projectnex...
Instagram:
/ projectnextrace
Facebook:
/ projectnextrace-105831...
Files for 3D Printing and every file you need for this project:
gum.co/pfBZM
Required parts:
-LED module ali.ski/osEVT
-Arduino Pro micro ali.ski/-fTPxW
-2x M3x10 screws ali.ski/54h-s7
-2x M3 nuts ali.ski/gA85S
If you want me to make some project for you or buy already made you can contact me here: [e-mail]

[@cholover7]

All parts finally arrived! Gonna try make one this afternoon/evening, will let you know the results! :D THANKS!

[@beniciocaro4772]

Is it just me or is this channel just a slightly worse copy of amstudio?

[@Materia]

To jest zajebiste chyba to zrobię dla swojej T150 :)

[@riniel1]

Where can i get the 3d file of the housing???

[@paulrosas2302]

Does anyone sell these?

[@aryah1513]

Numbnuts... you skipped over the part where you solder it to the arduino... literally the only part that isn't 1000% self explanatory and unnecessary. SMH

[@savvoxx]

Can you please help me? Why won't my LED light turn on? Even though the Ardiuno is already responding

[@العتيبي-م6ق]

Does it work on car?

[@cholover7]

Also a little tip for anyone who might want to make this beautiful project too: don't forget to also buy the copper cables used to solder the LED-modules on the Arduino pro-micro.

[@racingprincipal]

@0:25 How did you connect the two LED boards? Is that just solder wire between? I'm going to solder three LED boards for my rev lights soon and am looking for a way to connect them so they are tight together so they will fit into my dashboard

[@jorgepede8543]

Hello, could someone help me? I did the same as in the video the second strip of LEDs does not work well, even if I increase the brightness the 2 strips begin to fail. Does it carry some kind of external source or some resistance? Thanks a lot

[@lolixization]

Zajebiście zerżnąć od kogoś projekt, a teraz idź wymyśl coś samemu zamiast kopiować.

[@cholover7]

Going to be making 2 of these soon, looking forward, thank you so much for this simple tutorial and files :D

[@diyer1190]

then how to with the wheel？or USB connect PC？

[@cholover7]

It works fantastically and is very well customizable with the current SimHub, but the 3d files where not the correct size to fit, the front piece was not as deep as on the video and the back end the hole for the micro usb plug did not fit either and was too small, so I fear the sizing of the 3d files might be wrong? :D Further more after some tinkering I got it to work :D Thanks

[@Raidersky]

Awesome! 3D files are exactly the same as in the video. Maybe scale is little wrong after importing to program, but I can't do anything about it

[@princeofgiri]

yes its happen with mine. 3d files not fit, but other was great! thanks

[@princeofgiri]

@cholover7 how did you fix it?

[@maurysgr6734]

ciao ma su una moto si puo montare...graziee

[@riniel1]

did you print that with support???

[@chielb]

I have a arduino nano laying around, should that work too?

[@Raidersky]

It is possible to use Arduino nano and it should work

[@chielb]

@@Raidersky I modified your led strip to fit the arduino nano. Would you like them to post on your site? or should I put it as a remix on thingiverse?

[@daph7017]

@@chielb can you share?