Thank you , I seen after I watched the video fully you swapped the heads !
@fighttheswine Жыл бұрын
I have a really nice rx8 with a sick rotary. Haven't decided what would be less work to fix the rotary or build an LS swap lol.
@Ghost44-k9r Жыл бұрын
Put the ls in hold on to the rotor
@Ghost44-k9r Жыл бұрын
I’m about to start on my self looking for a red rx7 stick shift
@fighttheswine Жыл бұрын
@@Ghost44-k9rthat's fuckin awsome, do you got your eyes on one to buy yet?
@andyyoung12483 жыл бұрын
Great build. Im in the early stages of doing this myself with a LM7 truck engine. Quick question. Were you using 3/8 thick steel for the mount plates? Thanks
@matthdz6369 Жыл бұрын
You got a link for the headers just picked a rx8 roller gonna swap
@spill-x498411 ай бұрын
I do not know if you'll see this but it is worth a shot. What was the height of the spacers you welded under the mounting plate. I have been tryna measure the distance on mine but I am not getting it. My RX8 is in a shop far away from where I leave so it is a hassle going back and forth to retake failed measurements
@EazyOnCars11 ай бұрын
I'll see if I can get a measurement
@jake-gd8rb2 жыл бұрын
Say you have a shop do the swap (yup i am a poet and i didnt know it) profesionally how much is it worth in resale??? Is it possible to find cars that someone started to swap and didnt finish for whatever reason
@drentide4 жыл бұрын
Do you have to get the vehicle inspected when you do these kinds of modifications??
@EazyOnCars4 жыл бұрын
Not where I live.
@ramzen1976 Жыл бұрын
How's the handling? Still the same or better?
@carbonspeed10502 ай бұрын
I’m just starting , What did you use for oil pan , headers and intake?
@EazyOnCars2 ай бұрын
Ls1 oil pan, ls3 intake but I put on rectangular port heads
@fighttheswine Жыл бұрын
Hey did you finish building the car? I watched all the videos up to 7 and there was no finisher.
@EazyOnCars Жыл бұрын
Hey Cody, still working on it. Probably make a video or two in the next few weeks.
@fighttheswine Жыл бұрын
Awesome man, good to hear. can't wait to see it.
@robbyj11904 жыл бұрын
Can you give possible demensions of the mount plates ?
@EazyOnCars4 жыл бұрын
I can but it won't be very specific.
@robbyj11904 жыл бұрын
@@EazyOnCars as long as it close I'm pretty sure i can manage
@EazyOnCars4 жыл бұрын
It's 8" from the tab to the curve on each side, the curved part is 5" wide, each tab is 2" wide.
@robbyj11904 жыл бұрын
@@EazyOnCars ok thank you sir maybe include in your next video?
@7171slayer4 жыл бұрын
How much $$ do you have in this project so far? Do you have a projected total cost yet? Just curious thanks!
@EazyOnCars4 жыл бұрын
$2k including car and towing, probably be near $3500 when I get done. Free drivetrain helped me though
@7171slayer4 жыл бұрын
@@EazyOnCars Thank you!
@bradonmeggitt70413 жыл бұрын
What headers are them exactly can’t seem to find them on eBay?
Can't you take the front out or cut it off for better fitting
@EazyOnCars2 жыл бұрын
Actually fits better than I made it look, if you pull the crank pulley, it would slide in no prob. Also this was still the truck manifold and oil pan so it made it look more difficult also
@HawnLs32 жыл бұрын
What are you doing about the shifter for the auto? How you mounting it?
@EazyOnCars2 жыл бұрын
Stock shifter
@maestrophalyspanish13232 жыл бұрын
Nice info vids…where is this Minnesotan mechanic genius from…thanks in advance from Jackson, MN!
@EazyOnCars2 жыл бұрын
Hey guy, I am sometimes in the Rochester area, but moved to Michigan recently 😎
@fighttheswine Жыл бұрын
How's the car doin today?
@jasonbeach90263 жыл бұрын
Hey can u tell me what headers them are I no u had it in the descriptions but that leads me to nowhere lol
@EazyOnCars3 жыл бұрын
eBay LS3 headers, factory replacement
@KingofChilli823 жыл бұрын
What headers are those? LS3 headers are not really a thing...
@EazyOnCars3 жыл бұрын
Just search for LS3 headers on ebay.
@jaeproductions6x1082 жыл бұрын
Do you still have that build ?
@EazyOnCars2 жыл бұрын
Oh yeah should see more content in the next 1-2 months. Building a house has taken my time away from it 😁
@Cholonwa3 жыл бұрын
Was that duct tape you used to cover the cylinders to pressure wash the engine?
@EazyOnCars3 жыл бұрын
Cardboard square duct taped to the block.
@placentalsaute3 жыл бұрын
Dude what bottle jack did you swap out for the factory pos on the HarborFreight cherry picker?
@EazyOnCars3 жыл бұрын
I'm still using the POS it came with 😁
@placentalsaute3 жыл бұрын
@@EazyOnCars nice! The one on mine is a few years old (grey colored) and it doesnt have nearly the amount of travel.
@kevincurtis7132 жыл бұрын
could i get a copy of your templets
@EazyOnCars2 жыл бұрын
Sorry, threw them away years ago, but if you just take cardboard you can easily make your own 😉
@klalecherahim88953 жыл бұрын
Can you gave us an estimate of how much it would cost you this swap ive heard crazy numbers
@EazyOnCars3 жыл бұрын
Most of the time under $10k for fully DIY, I'm still under $4k and don't have much more to spend.
@jesseflz70773 жыл бұрын
is there a way you can use the 6 speed stock transmission
@EazyOnCars3 жыл бұрын
Not nearly strong enough, and would take more money and effort than just getting a T56 or TR6060
@jesseflz70773 жыл бұрын
@@EazyOnCars so you think i can get a 5.3 from a silverado with auto tranny and just make mine auto?
@EazyOnCars3 жыл бұрын
Seems like it would not be an issue, others have done this before.
@jesseflz70773 жыл бұрын
@@EazyOnCars thank you so much for responding back. one more thing do i need a different drive shaft? or put the silverado one?
@EazyOnCars3 жыл бұрын
Custom
@Completedaudt4 жыл бұрын
Fuckim awesome! Now come do mine.
@bvward4 жыл бұрын
Is it an iron block?
@EazyOnCars4 жыл бұрын
Yeah, 6.0L LQ4. Got it for free. Once the kit is done Aluminum is a drop in replacement should I decide to open my wallet.
@bvward4 жыл бұрын
@@EazyOnCars Got it! The L83 looks attractive (torque, don't you know ;) )