DIY Samurai Transfer Case Rebuild -The Teardown- "The Quick Way" Part 1 of 2

Hi! Here we have an SJ413 transfer case that will get a 4:16 Low Range kit and a full rebuild spread over 2 separate videos; "Part 1 and Part 2." Part 1 will be the "teardown" showing the complete disassembly, and Part 2 will be the "build." This video is meant for the DIY community with a little bit of mechanical skill, and to be helpful and/or supplemental for anyone that wants to try it yourself. For a more complete instruction document, I would suggest downloading the installation PDF from Low Range or Trail Tough, but this should show you what to expect, and which tools you'll use.
Please feel free to leave a comment, and if it's a question, I'll try and answer in a timely fashion.
Take your time, and if you get frustrated, take a little break. It's always much better to take a break than to cause one!
I hope this video helps! You can do it!!
Thank You for watching!!

[@FreddyFunderbunz]

I wish somebody would do a video explaining everything. Everyone I’ve seen just does time lapse

[@whiteknightandshorty]

Thanks for you thought. Personally, I'm limited by my computer, editing software, and KZbin's 15 minute limitations (otherwise I would have to pay!). I had the idea to make some videos where it may help a couple small things when the viewer had some previous knowledge of the topic. I would love to be able to upgrade my hardware and software to accommodate. Then I could go more slowly, maybe talk over the videos and impart more tips along the way. Plus, I'm relatively new to this and I'm learning as I go. If you have any specific questions, I'll try and answer them. Thanks for your comment, and also for your patience with my video improvements. I'll try to incorporate more details. Thanks!

[@riaanviljoen5151]

Hi my name is Riaan have same problem the intermididshaft wear . The nidle bearing is to hard. All the shafts i can bay in South Africa is to soft. Can you help me please. Thanks.

[@whiteknightandshorty]

Hi Riaan, can you contact Low Range, or Trail Gear? Calmini? Petroworks? I've noticed the eBay ones from India are also not as "finished" or as "hardened" as the OE ones as well. I'm sure they can help you out as I believe they are willing to ship internationally. Good luck!