Thank you I made mine, was great love it. You saved me couple of hundred dollars thank you
@screenprintingonabudget92084 ай бұрын
Glad I could help
@moecool115711 ай бұрын
I built one of your stretchers and it works great. I do use contact cement instead of the glue you use. I also will try stretching the first two sides instead of hand tightened but haven't done this yet. Thanks a bunch. Great design.
@screenprintingonabudget920811 ай бұрын
I'm so glad to finally hear from someone who built one. Please let me know if you have any other tips that might help me improve my design. Happy printing!
@n6st6 ай бұрын
Thanks for this information. I like the idea of pushing the frame instead of pulling the mesh.
@screenprintingonabudget92085 ай бұрын
Thanks for watching. This was in my first few attempts, I have gotten more efficient and it really does work well. Check out this for a little more info. kzbin.info/www/bejne/jme2iWiGhdV5jK8
@FredddH Жыл бұрын
You are amazing my friend. Truly incredible and especially for someone whose native language is not English. a thumbs up and one more subscription. Patrick
@screenprintingonabudget9208 Жыл бұрын
Thanks so much for the kind words. Hope it was helpful...
@n6st5 ай бұрын
I built a screen stretcher based on your ideas. I just finished it yesterday and am loving the results.😀 One variation on mine is a lazy Susan mount, which makes using it very easy.
@screenprintingonabudget92085 ай бұрын
Glad to hear it was helpful!
@michaellucas47265 ай бұрын
Whats a lazy suzie mount ?
@topgato989 ай бұрын
Nice job. It's a very simple setup jig but very effective! Thanks for sharing it. I have to try that on my next project! Cheers!
@screenprintingonabudget92088 ай бұрын
Thanks 👍
@alejandrolopezluis94326 ай бұрын
Nice desing, I'gonna try that, Greetings from Oaxaca México.
@screenprintingonabudget92085 ай бұрын
Thanks for watching. Hope it works well for you!
@jeraldnanjil6591 Жыл бұрын
மிகவும் அருமையான ஒரு முயற்சி. இதை மக்களுக்கும் காட்டியதற்கு மகிழ்ச்சி. கடவுள் உம்மை ஆசீர்வதிக்க வேண்டுகிறேன். நன்றி வாழ்த்துக்கள்
@screenprintingonabudget9208 Жыл бұрын
Thanks, and good luck to you!
@manuelalvarez114211 ай бұрын
Nice great idea i will build this one too hope it works for me just like it did to you thank you for this brilliant idea
@screenprintingonabudget92088 ай бұрын
Good luck!
@ABOOZKSA7 ай бұрын
Simple but very nice very great
@screenprintingonabudget92087 ай бұрын
Thanks a lot 😊
@lindas.64387 ай бұрын
Great idea! Thanks for sharing!
@screenprintingonabudget92087 ай бұрын
Hope it was helpful, thanks for watching.
@eross217 ай бұрын
this is so helpful. thank you. as far as glue goes. you should get the “thin” version of superglue. and also get the accelerator that goes with it. then you will have instant cure of your glue.
@screenprintingonabudget92087 ай бұрын
Thanks for the idea. That is in fact what I am currently using. I have posted an update to my channel. Thanks for the tip and thanks for watching!
@raulbarrera1905Ай бұрын
Tu ayuda es muy valiosa. Gracias.
@screenprintingonabudget9208Ай бұрын
Muchas gracias.
@tinachon7871 Жыл бұрын
Good job
@screenprintingonabudget9208 Жыл бұрын
Thanks
@JSCarie1983 Жыл бұрын
Super helpful video viewers: change playback speed to 1.75
@screenprintingonabudget9208 Жыл бұрын
Glad it was useful. Thanks for checking it out.
@TaymarPlays Жыл бұрын
Thanks bro
@santozfigaro8892 Жыл бұрын
Gracias amigo sencillo pero efectivo tu idea Dios te bendiga
@screenprintingonabudget9208 Жыл бұрын
Thanks! Hope it was helpful!
@irimi911 ай бұрын
Muy buena forma de tensar la malla, antes de tensar con los tornillos, yo le hago una cruz en el centro de la malla de 20 cm y al terminar me fijo cuánto se ha agrandado los 20 cm. Si se agranda un 4% a5% de su tamaño original tiene los suficientes newtons , te felicito muy buena forma de tensar 👍👌
@kingghazii Жыл бұрын
did you ever find a glue adhesive alternative?
@screenprintingonabudget9208 Жыл бұрын
I did. This got me about 20-25 screens. www.screenprinting.com/products/ryonet-screen-glue-kit-w-1lb-adhesive-8oz-activator Also here is an update on this video that might help you out: kzbin.info/www/bejne/jme2iWiGhdV5jK8
@josevelasquez5003 Жыл бұрын
Excelente buen video
@screenprintingonabudget9208 Жыл бұрын
Muchas Gracias!
@Elielson1979 Жыл бұрын
Hi my friend! What are the screen frame adhesive? I need it. Thank you !
@screenprintingonabudget9208 Жыл бұрын
www.screenprinting.com/products/ryonet-screen-glue-kit-w-1lb-adhesive-8oz-activator Also here is an update on this video that might help you out: kzbin.info/www/bejne/jme2iWiGhdV5jK8
@9thmountain169 Жыл бұрын
What size is the threaded insert and how exactly do you install it?
@screenprintingonabudget9208 Жыл бұрын
Link to all of the hardware is in the description. It has a hex head and you just drill the hole and then screw it in with an allen wrench. Goos luck, hope this works as well for you as it has for me.