DIY Septic Drain Field with 55 gallons Barrel, 22 Home made Gravel-Lees Drain Field or Leach Field

#DIY septic gravelless Drain Field)
the 2022 home made Drain Field/Leach Field
with 55 Gallon Barrels
thank you for watching i hope it was helpful
Until the second part of this Video
bye for now

[@greenharvestproductions6743]

Did you drill any holes in the white PVC pipe so the water can come out to the PVC pipe also do you use gravel in the bottom what size hole do you lay on the PVC pipe how many holes Anis pipe in what direction thank you Florida name is Joseph

[@IshMotorparts]

Hi Creen Harvest, the on from the Tank through Distribution box to the Blue Barrel there's no holes on them, those ones in Blue Barrel, i bought them as Predrilled/ 1/2 holes, i did not use Gravel in the bottom but I drilled holes on the blue barrel as you can see on the part #1 of this video, with all different sizes of hole because i used the universal drill bit

[@IshMotorparts]

hey Joseph, can I call you?

[@IshMotorparts]

or look me up on Facebook we can facetime there under, Maya soñadores Fb

[@juliobernal5104]

love it

[@lisaharris4141]

Did you run the perforated PVC pipe through the entire length of the barrels? How did you end the PVC? Awesome video!!! Thanks!!

[@IshMotorparts]

No, I only did 10' foot and the rest is empty barrels

[@rattlesnakepatriot3131]

​@IshMotorparts is your septic still working good.

[@cheneybros]

Have you had any issues with these barrels floating? OR did you put some rock or concrete in the bottom of the barrels to keep them from floating?

[@IshMotorparts]

Yes at the first the big white one did because I left it in the ground for about 30 days or so, so I end up using only one, I think I showed and explained that on this Video or on other one

[@IshMotorparts]

If you asking about the Blue ones, No did not put racks or concrete in the bottom, I used only Barrels, sheet or old Plnkets and finally soil/dirt on top, as of right now it's working perfectly no issue whatsoever

[@greenharvestproductions6743]

Pick up some blue barrels like you did what I'm trying to do is a little bit different than you are I'm trying to separate the septic tank. I'm disconnecting the pipe that goes to the septic tank putting a hole in the wall so I can run the washer and the water does not go into the septic tank basically what I want to do is a leach field when I start making it I will make videos of it just want the washing machine to be separated from the septic tank so I can wash clothes and it can go straight into the ground I don't think I need a distribution box because I'm going about 2 feet underneath the ground maybe three drill the holes on the blue Barrel like you did put the PVC through the Blue Barrel make sure I drill holes in it because I already have quite a bit of white PVC pipe I don't know if I had to do a 4 inch pipe I'm trying to schematic on it right now the hardest part is joining the hole-in-the-wall the concrete wall cement block so I can run it downwards then dig a hole and the ground run the PVC pipe dig a trench because it goes a little ways l formation then back to the Blue Barrel I tried to find your website but I couldn't find it thank you very much for the information Joseph Velez

[@IshMotorparts]

yey alright you get it men, if you using the 4" thin wall pipe, this is the Right hole saw size, 2 9/16 =65 mm, the part number through Amazon, M24 , its kind of confusing but this is th the only perfect one i found i went to A/c hardware, Lowe's and everywhere I found some ether too small or too big

[@IshMotorparts]

sorry I was reading that the Box i got here but but I think they the wrong Label on it,. so it should be the. Phituoda 4-1/2" =108 mm Hole Saw