Diy Sheet Metal Bender From Bearings

[@SekAustria]

Hello guys where you from? SUPPORT ME ON PATREON www.patreon.com/sekaustria

[@louisvanderwalt3380]

Sek Austria I am from South Africa NorthWestProvince MaanhaarRand midway between Rustenburg and Krugersdorp Gauteng ...I like your ideas

[@NGeorge5042]

Im from Romania ;D

[@aadsideas]

Hi Sek Austria! Nice DIY Video. Ano ang pinakamalapad na sukat ang kayang i-bend? Nagbebenta ka ba ng Sheet Metal Bender From Bearings mo? Thank you. God bless you.

[@vicentenascimento786]

Pito para everlast

[@claudiog.7397]

Veneto (Italy)

[@jiri3925]

Great way of guiding the sheet, a good idea, this system is not used even by professional wheel hand benders of all manufacturers.

[@davidschwartz5127]

Great Build! I built a similar forming tool several years ago to replace some furnace duct work in my house. I got the inspiration from and English wheel I saw on TV. Since I didn't have the room for a large bending machine or platform, I came up with this tool, takes up way less space and I believe the results were just as good if not better. I like your guide system setup it's much better then mine. I pre-loaded the single rod bearing, by threading it's rod in to the handle with a lock nut and slight bend in the rod this may not be necessary but that's how the English works. One other tool you need to go-a-long with your nifty forming tool is a rigidity line former, which is a tool that makes the X lines in long wide areas of duct work that would flex and make noise under pressure or vacuum. (you make already know this since you knew how to made this tool). I used an old thick 7 1/4" circular saw blade for the disc with the teeth cut off, mounted 2 bearings and a shaft thru the blade hole, then inserted the disc in the end of a old 1/2" steel water pipe notched out on one end for the rotating disc, with a bicycle hand bar grip on the end. I found it worked best at forming the rigidity lines laying on an old firm sheet of cardboard. Make one you'll see what I mean! Mentor, Ohio on the Southern shore of Lake Erie.

[@rockdog2584]

Okay...I've never seen a sheet metal bender that worked like that before. Always been the typical sheet metal break or pan box break. Pretty slick.

[@josepeixoto3715]

Like it; i did mine with 12mm threaded rods and nuts, no welding; I like your idea of drilling the ends of the rods to pin the bearings;

[@joelongstaff7601]

Thanks mate. I'm in Ontario Canada and I am starting to build peddle cars for Christmas gifts. Your tool will be of great help.Nice work.Now I need to figure out how to do radius bends.With a shrinker stretcher it wont be hard with a crisp line from your tool.

[@jaksonsabino7696]

Passando para agradecer, ontem copiei essa ferramenta do seu vídeo para fazer um trabalho hoje, consegui fazer uma calha de 21 metros com perfeição e sem emenda. Top de mais

[@databanks]

A sheet bender that doesn't limit the size of the sheet? That's pretty damn cool

[@kishorekumarthappetla5182]

The Tool output is awesome

[@dasdas5725]

your work is great! always watching ur videos

[@elroyalty09]

Bad ass my bud

[@tzugagkf2933]

I am from indonesia and i like your channel... Keep creative..

[@MrFarmcountry]

There is a company that sells a product that works the same way, but the small size like this starts at around $300USD! Good video showing the build. It looks just as robust as the manufactured version. Only advice is next time you install bearings, you should only apply force to the inner diameter, otherwise you can end up damaging or bending the bearing assembly. A piece of steel tubing or a deep socket work well typically. In this project, they slid eight on, so no big deal, but with tighter fits, damage is almost guaranteed. The big selling point on these is being able to bend the sheet a 3rd time to complete the box shape. A press brake cannot do that. Also, you can use it to roll the edges with a really tight 180° lip like tool box drawers have to increase rigidity.

[@movax20h]

What is the name of the company?

[@MrFarmcountry]

@@movax20h I think it is Eastwood

[@Aerosteez]

Wuko and draco make them

[@olastensvehagen5994]

Not bad at all! Great job👍

[@MadeinPolandChannel]

Good job man!! :)

[@SekAustria]

thanks bro :)

[@greasysteve5671]

Sek Austria yeah you are a god with that arc welder.

[@giovannizampatti5285]

.

[@patrickperry6945]

Pretty cool. Loved your clever use of the nail.

[@GibClark]

very nice👍👍👍👍 and with a stick welder👍. You may know this but, if you spray no stick kitchen spray on non weld areas and things like bearings, etc. that it helps with splatter clean up and protection .

[@radmansa5514]

Nice idea, good work

[@gregors.7430]

Wahrer Meister, gute Arbeit.

[@mrimbusyt]

Great Job man 👍👌😀👌♥️ Huge like 👍

[@owpeterj]

Apologies for directness. Fascinating to watch evolve, it became part of a highly dangerous process. Inevitably as one moves back and forth ones weight and energy transfer is constantly in flux and the end points of the stroke remain constant in the physical metal plate. Over the edge with the arm and the corner of the sheet will rip up the inner forearm - it was nerving way more than the nonstop Muzak - forget it as kritik. . Be an observer of your vid with an intent to neutral assessment with regard to this. Consider, if you haven't already :-) as you r doing this process, if the potential is very close at hand for my considerations to be indicative of the predicament thanks for the like little bro - you suddenly really freaked me out - just the thought churns my guts. I do have scars lol (not at the time)

[@CerealKiller187]

Loving the rooster cameo lock step with the beats.

[@MassageWithKlay]

awesome work, instantly thought .. this is going to be interesting as soon as I saw you using a nail for a center punch :D

[@erlinghagendesign]

Hi, you can integrate a small scraper device like a lathe insert to pre shape / pre cut your bend line. This can make your device much more easy and precise to use also for thicker materials. Also I would not recommend to weld like this, but to hard solder. You can work entirely with brass or copper components. A much better result. Gruss von Herri in China :-)

[@bobsmith9329]

What stupidity

[@neilkennykenny4113]

Nice job. I have one its a brilliant tool but its can be a bit cumbersome the bender in the vid looks nice and easy to operate.

[@billarroo1]

Ha ha I was trying to figure out what u were doing , GREAT idea, 😅. Thanks William

[@Harinair72]

Pure genius!

[@pedromoura1506]

Top top broou obrigado 🤠

[@kaarfii]

Gute arbeit!👍👍🏻

[@alanm3438]

Interesting, I would have never thought of something like that. Good job.

[@musicasrelaxantes765]

VERY GOOD.

[@-Crash-Nebula--]

Che figata bravo

[@themosplastiras8255]

bravo from Greece..

[@CHUCKtheFED]

That's freakin awesome!

[@MCsCreations]

Awesome work, dude! Really nice! 😊

[@antoniosilva5933]

Ótima ferramenta parabéns nota máxima . 👍👍👍👍👍👍👍

[@3982100]

Sir ur have a good knowledge of work in all conditions 👍👍🏅

[@santhoshkrishnan5741]

Awesome bro

[@cruzmaribelmorehead8737]

I love the music, and your bending g tool us awesome. I am sure you could make another for larger jobs if you wanted to. Thanks a lot for sharing this.

[@arturopacheco3796]

muy buena idea para doblar una chapa felicito su ingenio y gracias por compartir tan brillante idea saludos desde mexico

[@tomwagemans1872]

Nice tool. Maybe you could hang the parts on a wire before paint. You can get to al sides without touching it.

[@wallydelanus5454]

Muy linda herramienta like saludos desde Lanus Argentina

[@chandradefta4890]

Nice army glove dude

[@BrassLock]

Pretty interesting design, I haven't seen one like that before. Part way through the video it reminded me of an _English Wheel_ in minature, then I thought maybe a _Beading Tool_ or even a _Cutter_ towards the beginning of the demonstration. I guess all those tools use a repetitive rolling action with side loading/stress concentrated in a localized area of the sheet-metal to deform it into the desired shape. I enjoyed the neat way you captured the bearings without use of screws or welding. Greetings from Chiang Mai, Thailand.

[@Moronicsmurf]

It's called a flashing bender its primarily used by roofers.

[@gaston123mz]

Très jolie travail. 👌👌👌

[@dejan1968modeste]

plutot joli

[@heldisdy1390]

Nice One i'll try to make one like that for growing green, thank you.

[@mirceamoraru2463]

Bună treabă. 👍👍👍

[@adsconstrucaoservicoserepa3551]

Boa noite ótimo trabalho 👏👏 ficou muito bom

[@necopizzu59]

Muy buena herramienta.. Felicitaciones la voy a copiar para mi

[@larrysullivan6536]

Very good brilliant

[@andersonbicalhodesouza3588]

Se observamos a máquina de corte, ele também montou, parabéns pelos vídeos.

[@timflanigan8586]

Clever idea, well made. But good lord......that music!

[@aranilrajput8]

good work

[@anisioefamiliajod6015]

Gostei muito legal Parabems mesmo

[@kenswitzer4133]

Can’t go very thick with the metal. As someone has stated it is just a bead roller. Can do this on your work bench using angle to make crisp bends. Think I would make it heavier duty but for thin material the cost is low so go for it guy’s.

[@firstmkb]

Nice job, very clever. I admit I kept wondering if you were going to slice your hand open on the sheet, though. St. Louis, Missouri, USA

[@ياربيارب-ص1ظ]

Very cool

[@chekomex]

Thanks Mr hi from México Country

[@MegaAvimanyu]

beautiful

[@movax20h]

This is called bead roller. They can be used for various things including stright bending.

[@jonnyshoestring9368]

Would you not have got a better paint finish by putting a primer coat on first? Excellent Vid👏

[@juliussuryono6214]

well. nice result. ..

[@seller559]

Brilliant

[@Stiven986]

Co tu sie odjebalo to nie mam pytan !!! no kieszonkowa gietarka ;) ;) ;) Great job !!!!!! Great idea !!!!

[@sergiolops8138]

É um gênio tem uma mente consagrada

[@alextrezvy6889]

Does this tool suits to bend ~1 mm aluminum sheet?

[@davidschwartz5127]

Sound like Paul Hard-Castle music, I would recognize it anywhere

[@edilsonmartins6653]

Muito boa ferramenta.

[@valveman12]

Cool tool

[@ruforufo2185]

very cool

[@kukabeludobeludo1434]

Top meu amigo vou cópia esse projeto 👍✌

[@sebastiaogomesdasilva1727]

Show de bola, tô precisando de um desse!

[@dmanson7234]

Hey, your video at aprox 3:05+ looks like your gloved thumb is supporting the welding rod while hand rests on grounded vice, is that correct?

[@monstermash7487]

Cool! This seems like it migh be an ok field tool if you needed to make your own light gauge channel or angle. But there are tons of simple DIY breaks you can make for home fabrication and would have no use in a shop. Have you tested it much? What's the max gauge you've used it at? Have the bearings withstood the work? Really creative and impressive invention though, I want to try it out myself. Canada.

[@mariomelo7028]

Muito bom o seu trabalho

[@johnhempstead3074]

it works but looks like a good way to get a bad cut im talking about a hand or arm.

[@WRFUSINAGENS]

Que bacana, muito criativo, parabens, gostei muito.

[@gavatar100]

Dentro de mucho proyectos porquerías ,este es muy bueno ...👍

[@reynaldofontanilla8358]

Ang gling mo idol, gusto ko nga sana mg enroll sa tesda to dvlop my welding skills, my hloblakan po kmi at regular po nmin n gmit ang krmatilya hlos lhat po ng nbibili nanin mdali mcira gusto ko po sana mkagawa ng durable n karmatilya. Kelangan ko po ng tube bender nyo. Mgkano po b un? Sana po m feature nyo din kung pano un ggwin. Im ur fans and subscriber. Tnx in advnce.

[@juniorhead1406]

I wander how thick of sheet metal will it work on

[@martyparrott2060]

How does it bend the metal ? How thick can you bend?

[@garage154custonLtda]

Muito bom, excelente!!!

[@vaioskaliakoudas6388]

Very useful and very versatile project thought, will the mini paint gun be able to paint a whole car or truck or motorcycle???

[@SekAustria]

it can, but youll just refill once it runs out of paint

[@wpowerwagon]

Great job. But my question is why does everyone who makes a fab project wears shorts and sandals? When I worked on anything I wore long sleeve shirt, pants and boots. For what you built it's good idea

[@jorgenlannock]

because home inventors are special 😁. at work we need to wear too much safety stuff, so we compensate at home 😂.

[@firstmkb]

Toes are overrated.

[@andrewiliam7212]

Boa ideia curti muito

[@pcz5233]

Only would work on super light guage galvanized. Better and easier fabrication methods for a DIY sheet metal brake home garage type, which it obviously is.

[@shadowjohntube]

wow, it works.

[@anisioefamiliajod6015]

Direto de Palmas to eu gostei de verdade

[@brauliorubio2465]

What size gage is that sheet metal?

[@saxon215]

Nice!

[@kyroaustria633]

we got the same surname! ^_^

[@williamponton4785]

How can I get all the measurements

[@facilepratico2193]

Muito bom mesmo parabéns.

[@eduardodofredo1811]

do you have any price list of your products...

[@ЭдуардБахарев-к7х]

🏆

[@Ms77serega77]

В хозяйстве пригодится. Молодец.

[@TotoGuy-Original]

where do you get your metal drill bits from they seem really good

[@amgad302]

Wow .. great

[@valdairviana1946]

Bom vou fazer do jeito

[@emiryldrm1180]

Perfect