【DIY】SIMPLE PLANT STAND DIY / Planter Stand / PLANT POT

sho.
Thank you for watching.
Plant stand that even DIY beginners can easily do
I was looking for a stand to put foliage plants on, but I couldn't find a good one, so I tried DIY myself!
Purchased 30mm square lumber at a home improvement store.
I had it cut to the following size.
280mm x 2 (for base)
250mm x 4 (for legs)
170mm x 4 (for enclosure)
* Please adjust each size according to the size of the pot you plan to place.
(1) Make a cross base by "cutting out" the 280 mm square timbers.
② Attach the legs to the base of the cross.
* The base and legs are the parts where the load is applied, so they are firmly fixed with screws.
③ Attach the enclosure with adhesive.
④ When the adhesive dries, paint it to your liking and complete.
* This time, it is finished with Watco oil.
If you change the length of the legs and make some, it will look better.
If you like this video, please subscribe to our channel!
/ @shohousesimplelife8898
I also do SNS.
Feel free to follow us!
Instagram
/ sho.house
Twitter
/ sho_life_is

[@miyu1883]

作りたいと思っていたので出会えて嬉しいです。わかりやすくて良かったです。

[@user-vr4yy7ot2o]

参考になります。ありがとうございます。

[@seikouudoku]

いいアイデア！学ばせていただきました。ありがとうございました😊

[@shohousesimplelife8898]

是非作ってみて下さい〜😄

[@yoshimii]

脚の長ささえ変えれば色々なスタンド台になりますね 初心者の自分にも作れそうだし真似させてください！

[@shohousesimplelife8898]

ありがとうございます〜！ 是非やってみて下さい。