DIY - Spark plug replacement Jimny 2023

[@madhavanmathanagopal9258]

Superbly explained ❤

[@narendrachauhan2679]

As per this video I have also changed the plugs By Ruthenium plugs .amazing experience with new. plugs. Thanks for such a informative video. 👍

[@TalesOfTheJimny]

Amazing explanation

[@rejivarghese8026]

very intersting👍

[@roastedtechmodules5858]

❤

[@aniketchatarkar2888]

sir, at 12:46 what is the material/sheet that you have used for your under the hood dampning? can you please share the details. Thanks for the informative videos.

[@CurbOvered]

@@aniketchatarkar2888 its a hood insulation sheet and is available easily. Search for it in Google.

[@andyg5004]

I think you’re mistaken there with regard to the spark plug gap. Gaps are a lot less than 1mm. Usually the gals range from 0.40mm to 0.55 mm. You don’t need to have the torque adapter on while removing the plugs

[@CurbOvered]

Gap for Maruti Suzuki Jimny Spark Plug as specified in the Owners Manual is between 0.95 to 1.05 MM. Please refer to the manual, page 9-14. You can download the manual from nexaprod4.azureedge.net/-/media/feature/nexausercarmanuals/pdf-manual/jimny_owner_manual_new.pdf . Regarding torque wrench, I was just demonstrating the usage. I of-course know that we dont need to use it while removing the plugs or any other nuts/bolts. Thanks

[@chandidas9858]

Graet! let me know the number of Iridium plug for Jimny, please. Thanks in advanve

[@unnichan8653]

Thank u for valuable information. How to purchase it please reply.

[@CurbOvered]

Available on Amazon Japan. www.amazon.co.jp/-/en/gp/product/B07HRFLYZD/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

[@11Pvsss]

Have they any effect on milage

[@CurbOvered]

Over longer highway runs definitely, not so much in city.

[@sejal.rathod]

From where did you ordered it?

[@CurbOvered]

www.amazon.co.jp/gp/aw/d/B07HRFLYZD/ref=ox_sc_act_image_1?smid=AN1VRQENFRJN5&psc=1

[@Philip7119]

Do these spark plugs come pre-gapped?

[@CurbOvered]

@@Philip7119 Yes, they are pre gapped. I had mentioned the gap in some earlier comments too

[@Philip7119]

@@CurbOveredthanks for quick reply! Yes, was wondering if these plugs are to be run with same OEM gap or some other gap specified by NGK. Did you check the gaps prior to install, were they all consistent and within OEM spec?

[@CurbOvered]

@@Philip7119 They were all set to 1MM and within the.95 to 1.05 MM gap specified for the Jimny.

[@Philip7119]

@@CurbOvered thank you! Video is very detailed, looking forward to more DIY’s.

[@MartinGoh-e2s]

May I know what is the number of the iridium spark plugs?

[@CurbOvered]

NGK DCPR6ERX-11P RX

[@kbpsn1976]

Sir can you share the link of the plugs on Amazon Thanks

[@ranjansandhu]

sir your method for torquing is not correct... simple jiMNY make it simple