DIY starter remote mount solenoid easy step by step how to with schematic

Stop throwing your money away at mechanics!! ..Real easy do it yourself Starter Heat Soak Fix ! . No more mechanic fees .. Remote Mount Solenoid . How To Wire A Ford Solenoid Step By Step Wiring Schematic . Wiring Diagram . Twin Turbo Lingenfelter Corvette . Mustang Dyno . Buggati Veyron . Worlds Fastest Street Car . Autoshop 101 . Nielson Racing Engines . Speed Shop . Camaro Burnout Chevelle Nova Prostreet Street Wheelie

[@giniefungi1649]

Hi, thank you for your video, everything make sense apart from when you mention the jumper piece. You say it needs to be fitted somewhere somehow on the solanoid....could clarify that point for me...I am not sure what to do with that jumper piece...

[@camaroc6]

If this is for heat soaked solenoid, how does it work if you still go through the old one that's still on the starter and hot as hell , thanks

[@klowny1969]

Yes u are correct!..the only thing u should have left on the starter is the battery cable and the jumper connection..

[@kevinpeterson4098]

Thanks for the video! My solenoid on my sbc went out today. Got a fresh rebuilt engine and had extra starts on tuning and such. But in theory, isn't the one on the starter going to do the same thing as mine did fail because of heat or overstarting? Just curious what you think of that? Like is the failure rate less addingn a external solenoid?

[@ianp2009]

Did you have any luck with this? I'm having the same problem for the same reason and wondered the same thing as well while watching

[@rhaebeam]

Thank you for awesome videos I have to watch it several times to get it. Thanks

[@neoholland]

i watch the video again and you said why is jumped LOL!!! ok... so the S terminal in the starter goes to the fat and the S in the selenoid... the S terminal in the selenoid will have the starter and key wire! got it!!! i have to re wire my starter :P

[@dickeymoore3662]

Does the starter jumper metal piece come in this kit?

[@SSAuto-sz3dj]

Thanks for the video man. I have a question. I have a total of 4 wires. I see the alternator and battery positive on the big lug, I have a smaller black wire I believe is the “S” wire, then I have another small black wire labeled “R”. I heard you mention the first two lugs but I did not hear you mention the “R” lug. My question is where does that wire land at on the new solenoid and what does it do and stand for? Thank you!

[@abemartinez8489]

so i can put that on a chevy to bypass my solenoid ???headers are like a half inch n gets super hot will it work if my solenoid is bad its a newish starter but when hot wont start unless i bump it with screwdriver😒

[@yukon1000]

will do! Thanks for your time!! Keep up the good work!

[@klowny1969]

+yukon1000 thanks

[@michaelrader8380]

Gawlee that Texas Pete is making me hungry.

[@sjeii9454]

I know this is an older video, but I'm hoping Klowny or anyone can help. My Camaro has a remote solenoid on the inner fender. However, the positive cable from the battery goes to the other side (right side) (closest to the I terminal) and the other cable from the solenoid to the starter is on the left side (closest to the S) does this make a difference? It starts up, but want to ensure it's wired correctly. Thank you.

[@klowny1969]

nope its good...can be wired both ways..thanks for watching

[@martinatate2546]

I switched wiring sets for whole switches and sensors, it was on a automatic car but mine is manual. I’m running into more problems than I thought, should I just switch back before I even try to finish

[@russwhite6235]

Does the cold post only get power when the keys is engaged ? Once the key flips back to the run position the power stops and stops the starter from spinning correct ? Is there a post I can use on this to give power to my amp only when the key is in the on position ?

[@klowny1969]

correct..you cant connect your amp to this..you need an ignition hot source..donot forget to subscribe

[@AbelCastillo93]

What if the battery is connected to the other post terminal aka cables swapped

[@The_Hollywood_Mission]

I have a 65 El Camino with a 350 Chevy engine I have the problem of starting when it's hot so I bought an external 1990 Ford F150 solenoid very similar to the one that you show in video. Do you remove the red battery cable to it ? It seems like the solenoid that is on the starter is also running the external solenoid????

[@BeauGeste18]

Great video. I have a question about a 3 post solenoid. I have one with a bump start on it. What do I do with the R terminal wire. I think it is suppose to get 12v from original 4 post solenoid?

[@hueroski]

do u have hei or points distributor?

[@klowny1969]

U can switch the two big post connections..yes

[@seancrane2612]

I am trying to add one of these to a Cleveland 351 with a starter that only has one big post. should I just go from the battery to the solenoid, then solenoid to the battery?

[@jaimeortega6716]

im having problems with the jeep not cranking...i put a new starter solenoid just like the video so i have a one wire alternator that goes straight to the battery. so how can i do that setup? or should i just connect it to left side of the solenoid and ignition to the "s" and the right side to starter. am i missing something else or what?

[@ronaldvantassell2366]

I have passed the solenoid and when I start my vehicle it will not stay running unless the starter is engaged what do I do

[@stevebigler]

Where is the diode for the collapsing power reversal after the coil de-energizes? Or do you not care about the switch arching and blowing out eventually?

[@klowny1969]

no need for a diode

[@pking470]

I'm having a hard time figuring out how everything works to the coil what goes there is a wire that connects to the relay that goes to the coil? Just trying to figure that out for the final part thanks for any help

[@jimbo16720]

The other terminal on the 4 terminal solenoid would go to positive side of coil. The I stands for ignition. Real simple.

[@Tengxiangfstartersolenoid]

startersolenoid.net/starter-solenoid/ check the article, you can find the answers. It's a very detailed starter solenoid guide.

[@charlesevans8469]

If I'm using a point distributor do I use the s and I on the remote sloenoid

[@daroldstrunk4252]

does the battery terminal go on first before the others on the solenoid

[@carlatracy8666]

Can you tell us how to hook wires back on to starter for 99 Expedition Need to know what wire goes where (selanoid attached to starter) 3 posts

[@davidmarquardt5587]

Thank you for your easy method....

[@klowny1969]

Thanks and don't forget to subscribe

[@slig54402]

great.Just trying to find where most wires hook.Starter by itself on solenoid.thks

[@kylekaminski4757]

Helped a lot, thanks. One question, I have a mystery wire. Its 1979 mustang cobra v8, and I have a wire that i dont know where it goes. The car has an aftermarket security system in it, would it be possible that a wire frome that would go to the solenoid? It also has an engine kill switch hidden that prevents spark, but i tested that and I dont think the wire is from that because it still worked when the wire wasnt connected. Any clues?

[@klowny1969]

where on the solenoid does it go? the small stud or big stud?

[@kylekaminski4757]

It has to go on one of the small ones because it wouldnt fit on the large one. Im 99% sure its for the alarm/security system after attempting to follow the wire through the firewall

[@klowny1969]

+kyle kaminski probably a remote start for the alarm

[@markmcintosh6968]

Klown, can this be used with a ls swap? Any response would be appreciated

[@klowny1969]

Yes you can if you want

[@roybatty2680]

Sounds logical except what is the purpose of this? Adding a second solenoid to your starter so you can mount that 2nd solenoid to the firewall? Maybe for troubleshooting purposes.??

[@alberthunter4413]

I have a 93 ranger I changed negative ground and positive where does plug off neg go mi truck want start

[@gregoryvanek9038]

It solves the heat soak issue common on modified GM engines with headers.

[@klowny1969]

I would use a 1\0 gauge (single zero)

[@tomabuhl6190]

Pretty sure its keanu making this video for us

[@klowny1969]

Yes it is..don't forget to subscribe 😉

[@SirSlaughter357]

Alright so I'm redoing the old brittle wiring on my 74 Dart and I'm still fairly new to the engine electronics/ignition systems so bear with me here. I've heard you refer to the solenoid as a relay a couple of times. Is a solenoid the same thing as a relay? Would that be why my starter doesn't have a solenoid on it but a 10gauge wire running to a relay mounted on the inner fender well instead? The motor is burnt up so If I replaced the starter with one that has a solenoid mounted on it like that really chromy looking starter in your video could I toss the old relay and just run the ignition switch wire strait off the S terminal on the solenoid. The previous owners left the car's wiring a complete CF so i'm trying to reduce the amount of wires I have running around and remote mounted relays way out in left field acting as eye soars and what not. I'm a bit OCD when it comes to organization and stuff lol.

[@mannykran939]

Yesir sounds right..good luck!

[@SirSlaughter357]

Manny Kran Awesome :) Thanks, I'll probably need it lol.

[@The.Lone.Wolf.]

you're a big help thank u so much

[@klowny1969]

Thanks for watching

[@clarkgriswold4510]

People....I have read so many comments on here, that think by adding this, it will correct a failing solenoid on your current starter....IT WILL NOT.....you still need a good working solenoid on your current starter, regardless whether you add this remote solenoid or not.....

[@karensturdavant1672]

we have a 79 ford f250 have replaced the starter and solenoid relay on fender wall now it starts with the key on in acc position but the starter continues to spin untill we disconect the battery whats up with that any help would be much appreciated, stuck in arizona.wayne and karen.

[@klowny1969]

Check at the solenoid to see if the small wire continues to have power..if it does then u have to trace that side of the circuit..if it doesnt then its the solenoid sticking

[@karensturdavant1672]

THANKS THAT DID IT,OREILLYS GOT IT RIGHT ON THE THIRD TIME,THE SOLENOID WAS CONSTANTLY ENERGIZED

[@klowny1969]

Glad I was able to help :)

[@TomKuegler]

Good information

[@benkalinowski5834]

I did this to my 88 GTA tpi And it didn't fix my hot start issue Do you need a new starter that doesn't have the solinoid in it I'm using my factory starter And I put on a dei versa wrap on my starter and it fixed my hot start problem So I did all of this for nothing Ty

[@klowny1969]

Ben Kalinowski this is a common starter heat soak fix..and so is the shield..sometimes one works and not the other

[@benkalinowski5834]

klowny1969 ok I'm just happy it's fixed Either way I was just curious if you had a different starter for it

[@klowny1969]

Nope..no special starter..thanks for watching and commenting

[@mrsuperd1983]

Im doing an ls 5.3 swap (86 chevy swb). I know you said that was a ford part, do you think it would be a good idea to use this? Thanks in advance.

[@klowny1969]

Yes u can use this..thanks for watching

[@frankdavidson9675]

let me try to make simple what you have is red wire from battery to big lug on solenoid the other big lug conns to starter now the little red wire comes from key switch to small bolt on solenoid other small bolt on solenoid gos to ground ----so what happens when you turn key to start this operates a magnet in solenoid which shorts out 2 big lugs on solenoid to spin stater this standard solelnoid operation no matter what its on your truck or your lawn more generly speaking so if you turn key nothing happens no click nothing take a jumper wire 14 ga ok short between big lug on solenoid red wire(battery) to small red wire on solenoid this should spin starter this tells you are not getting voltage from switch key operated their is a fuse from little red wire on solenoid to key switch there is a seperate wire from battery to key switch key just connects these two togeatherin side switch-if still no go check seat switch brake pedal switch pto MOWER BLADE not operated maby a rev switch this basic wiring on most mowers unless you are trained vometers you are spining your wheels using one i am 88 i built my first meter 1965 analog with vacume tubes today meters are digital no needle just digits

[@newyorkerinct2821]

I want to know how to hook up, a remote start

[@klowny1969]

nope this is for a remote solenoid..if ur getting heat soak issues

[@gibsonexplorer8777]

Easy you just connect a remote control button to the silinoid clips on and clips off when your done using it

[@joeybrown5553]

I'm guessing your smashed and felt like making a video well for that I love you and keep making um, you know your shit and send it out there x

[@klowny1969]

joey Brown thank u..u should check out my current videos..i bet u would love them

[@jaxv94]

AAAAYYYYYY OOOOOOOOH!!!!

[@klowny1969]

Xiuhcoatl Adrian! !

[@T3brn2ski]

Had you cut/deleted/edited 7 minutes from this, it would have been awesome. Show final drawing first, then go on for dummies.

[@klowny1969]

Thank you for the advice. Don't forget to subscribe

[@JasonKrasavage]

Jesus, why would I want to use both solenoids? The entire point is the bypass the original solenoid dude 🤦🏻‍♂️ what’s the point!?

[@klowny1969]

Lol you're funny

[@slig54402]

good try,some help

[@stevemccann3976]

Good start! Make everybody sound stupid. How condescending. Duh

[@klowny1969]

Huh?

[@matthewfranzen1339]

dude really loves to talk about nothing. can't draw either

[@klowny1969]

TELL ME ABOUT IT..WHAT A LOSER

[@jerrellcraighead6806]

Got bored watching

[@shanelen]

horrible

[@edpdx50]

Klowny1969, Great video! Real easy to follow. The best part is that I won't have to crawl under my truck to see if there is a loose connection to the solenoid. I know there is one cable from the FORD solenoid that still has to be run to the starter, but I don't think I have ever seen these nuts and lock washers come loose. I have seen smaller wire to "S" or "I" terminal crack and or loosen because everyone is afraid to tighten them too much. I already rewired my Blazer with this setup. I added a Anderson Powepole connector (use one side only) on the cable that goes to the starter from the FORD solenoid. I put it nearer to the new solenoid. I hook it up nice and tight to the starter while the starter is out of the car, so I can really get it snug. The added benefit is that I don't have to work so hard to get the damned wire connected to the starter in a cramped and confined space. I just have to mount the support brace and the two mounting screws. This setup has solved a lot of issues, where I used to curse having to troubleshoot GM starter no-start situations in the past. Easy and highly recommended. Big thank you.

[@ceolifestyles6796]

That's the reason I hooked up one.. No crank no Start issues. Works fine but I have to use a switch.. Is it optional? To use a switch or key?

[@1InfinityShade]

I guess i don't understand how heat sosking causes the failure. How does the external solenoid fire a heat soaked one?

[@choncoconcos5912]

I have the same question.

[@powers6963]

Is there a starter solenoid similar to this one, but instead of an 'S' and 'I' terminal, has a 'S' and 'G' terminal, where the 'G' can go to a switched ground like for a Chrysler style neutral safety switch instead of grounding through the mounting bracket?

[@ernestflores7561]

I installed a new solenoid in my 68 F250 truck and now when I go to hook up the battery cables it starts to crank I don’t understand what happened I know I reinstalled everything exactly the same help please

[@matt-om7cp]

Getting ready to do this on an 82 corvette. Thanks for the video. After reading through the comments it seems there’s about 25 way to spell solenoid wrong lol good luck y’all

[@klowny1969]

Lol thanks for watching and good luck..don't forget to subscribe 😉

[@retn1122]

Why didnt you just wire it as you’re explaining, why draw

[@klowny1969]

This was a very long time ago..I do everything on the car now..check my recent videos..don't forget to subscribe

[@lindseysteele1436]

Can anyone tell me the ford solenoid is clicking it's turning over but the clicking is anoing

[@lionelthundercloud]

I used this 15 yrs ago on a Chevy Corvette, I didn't remember the exact steps and this video is perfect for helping me. I'm going to use it on a Universal Diesel 44 HP on a sailboat. Thank you!

[@klowny1969]

Awesome! Good luck and don't forget to subscribe

[@markmcintosh6968]

Klowny, hey bud where can I find one of them shims to connect the terminals on the starter? Looked around on Amazon notta.

[@klowny1969]

Google "starter jumper wire"..or you can make your own..don't forget to subscribe

[@sambennett7023]

If you bypass the starter solenoid and use the good old ford solenoid hook it the way you said but the wire running to the starter should just hook to the thick post going straight in the starter because you're bypassing the starter solenoid because I guess because it was bad, so why still run through the bad starter noid. Just saying,

[@chevytalent]

I noticed that as well, two solenoids in series is pointless. all He did was add a solenoid to energize the oe solenoid.

[@ceolifestyles6796]

So are you saying run the right side of the Ford solenoid to the starter instead of the solenoid on the starter?

[@gregoryvanek9038]

Ok...you have a heat soak issue with your GM starter. Solenoid is on the starter motor housing. If you wire the Ford remote solenoid the way he said, including the jumper, you effectively bypass the original solenoid. Look at the wiring. It’ll make sense to you. It’s a common hot rod method.

[@bighitrider101]

Just found this video, my question is how would this help with the hot start issue if it still uses the solenoid mounted on the starter?

[@mikebas7325]

Kind of wondering the same thing, isn't there a plunger of some sort that needs to move in the old solenoid and if so won't it still get hot?

[@tomharned1617]

If you know what this guy is talking about you won't need this video.

[@troyburks6901]

I did that but bendix isnt engaging what i do i made jumper out of wire

[@Coodeville]

So that metal piece is used to jump the S terminal on the starter to the B+ terminal on the starter?

[@klowny1969]

Yesir

[@heydutchy]

Klowny - Thanks for taking the time to post this video. I installed this kit today on a C6 Corvette. Worked for the first two starts, then the starter stayed on (engaged and cranking) for a few extra seconds on 3rd start. Then on the 4th start, it stayed on and wouldn't tun off until I disconnected the battery. Car was not hot (only run for a few seconds between these starts), battery had been on a charger all night, solenoid was new (same kit as you show in the video) and I wired the way you have here (same as instructions in kit). Any thoughts on what caused the starter to stay on? Thanks, man.

[@klowny1969]

+Charles Steenveld hey thanks for watching. .check to see if the solenoid is sticking..i have a video on how to test these on my channel..a simple test light can be used

[@heydutchy]

+klowny1969 Thanks again - turns out the solenoid was bad - pretty common for those solenoids. I upgraded to a HD one from a Super Duty Ford truck and its good now. Running the same remote set up, just a more robust solenoid.

[@klowny1969]

+Charles Steenveld yup thats what i figured..awesome

[@michaelgraham250]

I need to know which wires go to which terminal.

[@klowny1969]

I cant get a good picture of the starter you are talking about..however , all starters are essentially the same..if u have headers close to it, it would be a good idea for a remote mount solenoid..i also have a heat shield from jegs that u wrap around my starter for extra heat protection ..

[@adamvalenzuela6626]

Why would i use a Ford part on my chevy? I put that same starter on my chevy no need for Ford parts. Thanks!

[@klowny1969]

Three words..starter heat soak

[@Lore-wv5mt]

my car inside light won't turn on I thought it was the starter relay ..I have one just like the one In your video how can I fix my issue I replace the ignition switch n nothing ...

[@klowny1969]

Take a look at my other video on how to test a starter..the three posts are: 1 ) the thicker stud for the battery cable and a bunch of smaller wires 2) other thick stud goes to the main body of starter 3) small stud is the trigger wire from the ignition

[@neoholland]

Ok so.... the battery and the alternator goes to the left side stud of the starter SELENOID, the right side stud of the starter SELENOID goes to the fat stud in the STARTER, the S terminal in the STARTER goes to the left side small stud in the starter SELENOID "s" terminal, and in that same "s" terminal of the starter SELENOID goes the wire to KEY right??? and i have to jump the S terminal in the STARTER with the fat stud in the starter too right???

[@nickpanhead7209]

Hi thanks for posting your videos, I'm looking to put a permanent start button in my 1987 ford f150, the solenoid switch is mounted on the fender. I'm having issues with ignition key where I have to turn past the normal to start. I'm looking to turn key toward start position and start with button. Then to shut it turn the key off. Can you tell me if I go with one wire off new button. To positive on battery and the other wire off button to the small S terminal on solenoid block, and should I put a fuse somewhere in there. Thanks for your help

[@richardleesaner4382]

I got a question for you I have a 1993 forest floor no crank no start change the battery cables Illinois on it and nothing I have power to my lights And everything but won't start what do you suggest

[@joshforgey8545]

I'm looking into best way to do this I hear some people hook this up improperly and it ghosts solenoid stays on because they have there s terminal linked to the solenoid terminal on the starter, and holds power even after let off cranking. Your way seams way better. But I have a question how dose your starter know when to crank will it only get power when you turn the key all the way? I must be thinking wrong because I thought that was solenoid pops out a when the key is turned acc (not all the way) just before you turn to crank. Or is it solenoid pops out when you start cranking?

[@MrJrc434]

just curious well this work even if the starter solenoid is bad

[@hueroski]

No

[@tonyboroni6949]

can't u buy a solenoid for the starter motor it's self or do they only come together with a starter motor, because my solenoid is starting to play up I have a xf 1988 Ford falcon what is cheaper the original solenoid or this type of one u have here cheers.

[@Stonedpimpin76]

I got mine all installed but all I had was some 10 ga. wire to run from the remote solenoid to the starter. It isn't sending enough power down to the starter to turn over the engine. What gauge wire do you recommend? I tested the solenoid without the wire from the solenoid down to the starter and I get over 12 volts but with the 10 gauge wire down to the starter I only get about 8 volts.

[@klowny1969]

I would do two things..put in a remote mount solenoid amd also get a heat shield for the starter..thanks for watching also subscribe !

[@neoholland]

thanks my friend, but i have to ask... why do you have to jump the S terminal in the starter with the fat bolt?? if the S terminal goes to the S terminal in the starter Selenoid?

[@infamousnova]

im going to try this, my wires are touching and car wants to start without turning key lol

[@WeekendPursuitOutdoors]

So does the jumper go to the "S" post or the "R" post on the starter?

[@Alcapone262]

I have a 73 Mach 1 and there's a 4th wire coming from the ignition coil, if I put it with the key wire the coil begins to heat up. What should I do?

[@Stonedpimpin76]

I just got mine today and the instructions say to put the battery and everything on the opposite side than what you are showing. Do they work either way?

[@michaelfavre351]

My 1973 ford f100 turns over as soon as I connect a hot battery to the truck. Pretty sure it’s wired exactly how you explained. What should I do??

[@klowny1969]

Solenoid could be stuck

[@michaelfavre351]

klowny1969 also Ive gone through three solenoids. What could cause that?

[@klowny1969]

Check to see if u have constant hot at the small signal terminal..that should only be hot when u turn the key to crank

[@helenmorace7270]

Are you from New York ? I'm thinking Flushing !!

[@klowny1969]

I grew up in queens lol

[@torresjorge11]

and that's why you don't smoke dope at 5 Years old !!!!!!!!

[@klowny1969]

I started at 3

[@Stonedpimpin76]

My starter is starting to suffer from soak now. Will a remote solenoid fix it or will I need a new starter also?

[@dawievanderwesthuizen9376]

Can I use a 24 v starter solonoit on a 12-volt starter?

[@dawievanderwesthuizen9376]

Everything looks the same and fits perfectly it's just a 24 v

[@8avexp]

AMC used that same solenoid. My '69 AMX has one just like that. The I terminal is for the ballast resistor bypass. During cranking, the coil gets a full 12 volts from the I terminal.

[@rabbibacongrease88]

Where do you buy that little metal jumper? I used to use a piece of tin can lid cut with tin snips to make mine from scratch but the one you got looks a lot nicer than what I've always used.

[@klowny1969]

It came with the solenoid kit

[@jemuelfideldia9831]

thanks for the video but where should i put the heater terminal? should connect it in the solenoid too?.

[@preacher031163]

U shouldnt make videos...

[@klowny1969]

Check out my latest videos..not ones from 10 years ago..and don't forget to subscribe

[@larryitsme7161]

You talk too much about nothing. This video should have only been one minute long.

[@tazerknight1]

if I use a ignition switch in stead of key. I need to ground the neg. side of the switch?

[@baderalmalahi]

how to use the ford solenoid switch as an isolator for additional battery

[@abelestrada7846]

Hi, so what if I only have power on 3 terminals but not the other big terminal?

[@ss396rat]

gooooood video, i need to install a master cut off switch, where would that come into play?

[@klowny1969]

that depends on if u want to be nhra legal..in other words..if u want to be able to shut the car off when its running..then u can check out my video on how to wire a relocated battery..if not. then just put a disconnect switch between the positive terminal on the battery and the feed cable to the alt/car..thanks for watching

[@ss396rat]

Yes it needs to be nhra legal, i will check out your other video thanks

[@GMANIC31]

where does the fuse box get it's power now when it's wired this way?

[@outboardfixer]

HOLY MYSTIFYING F.....