DIY surfboard time-lapse

[@adamede9316]

this is he first time I have heard a two feet song in a KZbin video and I'm mega proud

[@stepangering8957]

Adam Ede mega proud of YT that hasn’t deleted it?:D thumbs up!

[@trwsurfingco.3488]

Adam Ede nice racks

[@kevintyrer45]

Awesome video. Ive also started shaping some boards over the last 2 yrs. I shape the rocker and out line templates. Hot wire both. Then i got a permanent duplicate of i need to make another one. Each board had been different in shape & size. Loveing it. Well done

[@stepangering8957]

Kevin Tyrer thank you!

[@eahemam]

I want to learn how to do make boards

[@kevintyrer45]

KZbin is yoir best teacher & practice 😁

[@kevintyrer45]

KZbin is yoir best teacher & practice 😁

[@Norpizz]

Really nice work!

[@sereadosmares2498]

I can listen to Z: your surfboard is inside that foam... Just keep searching the board...

[@dustandfumes]

On your next one , I’d recommend planing/sanding the deck and bottom flat before cutting outline. Great video!

[@Jameswoodgo]

Dust & Fumes very sound advice

[@smokster0604]

Awesome build......

[@stepangering8957]

smokster0604 thank you! I hope next will be even better💪🏻

[@ricardomartins1165]

Very nice board.., to have it on the wall

[@stepangering8957]

Ricardo Martins actually it’s on the wall for most time. But it also work well in waves :)

[@kookarini]

Czechs, simply clever

[@stepangering8957]

Craig Telljohn haha, true that! We’re like “why should I buy if I can make it”:D

[@GreenlightSurfSupply]

Nice work. Reminds me of when I started board building by making my own blanks. We ship surfboard building products worldwide if you need anything for you next shape!

[@alphabadji8012]

Hi Greenlight !can i have your contact ?

[@martin_karner]

Whats the approximate total cost?

[@gregwebster8784]

Pretty good for a couple guys in a wood shop. If you want a job in California let me know. If you can build a board like that, then it'll be a breeze when show how it's done in a factory.

[@stepangering8957]

Greg Webster thanks again! Are you serious with your offer?🤔 it will be sick to shape a board in California for guy from a country with no ocean😅

[@gregwebster8784]

@@stepangering8957 yes, message me on Instagram @fabulouswebstar

[@georgemartin6389]

Did you end up going to california??

[@themaxdog]

You can use boardcad it's free, for tour templates outline and rocker

[@stepangering8957]

wow, that's useful thanks man!

[@themaxdog]

@@stepangering8957 no problem, thats the goal, help each others, bless

[@Gilloozz]

what is that thing you used to cut the foam, i am making my own surfboard next weak and your video will help a lot, but that tool could help more if i knew how to do it.

[@stepangering8957]

it's called hot wire foam cutter. see this video, there should be all infos you need :) good luck with the project! kzbin.info/www/bejne/iXTFdpiNlNNqhbc

[@Gilloozz]

Štěpán Gering thanks man appreciated.

[@HoStevie]

*Dis cool*

[@francescoamadei56]

Is PU foam?

[@groveman11]

awsome!!! i want know making knowhow^^*

[@ericsettineri6315]

co jste použili k lepení dřevěného pásu?

[@stepangering8957]

we used epoxy but I think it's possible to do it by many glues cause it will be covered by glass fibre and many layers of epoxy

[@maxibazan5695]

Soy de Argentina...pregunto,de que material es? como se llama ese tipo de goma espuma a la que le dan forma

[@alicebass1111]

Really nice! Which epoxy did you use?

[@RyoHe]

great vid!! what was your final layer, did you apply after the color spray also transparent lacque spray? otherwise any small scratch on the colored area will remove the paining...

[@stepangering8957]

Thank you! The final layer was clear epoxy and it's transparent enough. But the correct way is to paint the foam directly before placing fiber glass and epoxy. It would be still visible and there's no way how to scratch it. :) next time haha..

[@davidvos4195]

This is sick!!!!

[@nicolas9408]

Well done! How did you copy the outline of the stringer?

[@stepangering8957]

Nicolas Christ thank you! We used the old surf board which fits great. Then we laid it down on the floor and copy the shape, first the lower part by two triangle rulers and one long classic ruler (making mark every 10cm) and then do the same with upper part. It took about 1 hour in two people but the shape is great. Hope it helped, it’s pretty hard to explain it :D also it’s a year ago and I don’t remeber dvery detail :/

[@nicolas9408]

Thank you for your answer. I think I got the picture ;) Keep up the good work! Strč prst skrz krk!!!

[@stepangering8957]

Haha :D

[@ladraode9dedos409]

Hello Stephanie, I notice you use EPS foam and the resin you have does not eat it up, by the hardener measurements I would assume the resin is polyester, I am confused now! Please help! 😄😄

[@gregwebster8784]

Epixy, not polyester resin.

[@stepangering8957]

Yeah exactly, you have to use epoxy instead of PES resin for EPS. 😊

[@ladraode9dedos409]

@@stepangering8957 could you provide a link for that resin, please? Thank you in advance!!

[@guillermogonzalez8417]

What type of fabric and resin did you use?

[@stepangering8957]

Albert Gonzalez I think it’s already mentioned out there. It’s epoxy resin with double layer of 140g/m2 fibreglass for top and single layer of 160g/m2 fibreglass for bottom side.

[@pesci_fabio]

I didn't understand how you put the fiberglass on top of the fin spots, because the fins stayed in place, but you put resin inside and all that stuff.. Can anyone explain please ? (I'm quite new to surfboards)

[@stepangering8957]

pesci_fabio hey there, sorry for late answer. To be honest we made it wrong. You shouldn’t put the fin boxes with the first layer of fibre but with the last one. The fins must be out of boxes ofc. Then you just sand the holes through the fibre, place fins and here we go!💪🏻

[@pesci_fabio]

@@stepangering8957 oh, ok, now it makes a lot more sense 👌👌 tank you fella, amazing job 💚💚

[@ZAGSurfboards]

It can be done as shown in the video. Putting patches over the boxes then the full layer over the top is a sure way to stop the boxes ripping out.

[@NghiNguyen-ge9io]

What is the name of the solution? 0:18

[@annak.mullerprojekte932]

Wow, that's epic. Which size is the board?

[@stepangering8957]

Hi there, thank you! It's 6"2"

[@marcnegre1395]

eso es corcho?

[@cemozdemier3954]

What a beauty

[@boriklukas]

Ahoj, skvělá práce! Mám na Vás otázku. Chci si taky zkusit udělat vlastní surf, ale nemůžu nikde najít úhel ohybu špičky. Podle čeho jste uřezali střed? Díky moc :)

[@stepangering8957]

Ahoj, moc děkujeme! Promiň, že píšu až teď, nějak to tu zapadlo😒 Hele my kopírovali existující surf 1:1, takže to bylo jednoduchý. Ale jinak si myslim, že když budeš dostatečně dlouho bádat na netu, tak najdeš nějakou šablonu🤟 hodně štěstí s projektem!💪🏻

[@boriklukas]

@@stepangering8957 V pohodě. Kdo si počká, ten se dočká. :D Šablony jsem už našel, celé sešity nejrůznějších tvarů. Jediné, nad čím tápu je materiál. Jak polystyren, tak kolem laminace. Odkud a co jste brali? Jestli se můžu zeptat. Díky.

[@stepangering8957]

Lukáš Borik jasně, no brali jsme obyč eps, už si přesně nepamatuju odkud, ale to taky najdeš rychle. No a epoxid dvousložkovej jsme brali od Stachemy. Tvrdili jsme to P11, to je dost pevný, ale musim říct, že dost křehký. Nicméně tvrdidel mají víc a chce to asi zkoušet. Ideálně si napatlat na kousky eps a pak chvilku zkoušet no:)

[@boriklukas]

@@stepangering8957 paráda, díky moc! A to eps, jste brali jako nějakou dvoumetrovou desku nebo jste lepili více desek. Vypadá to, že máte jednu velkou, tak se ptám pro jistotu.

[@stepangering8957]

Lukáš Borik nechali jsme si říznout dva kvádry každej 200x30x15cm, abychom měli co nejmíň práce. Vyšlo to myslim do 1000Kč na hlavu. No jinak nabízeli už předvyrobený kvádr asi 200x60x20cm, který byl asi o půlku levnější a uděláš z něj 2 surfy. Ale je to hodně řezání na přesnost a na to jsme neměli ani nástroje ani čas. Pak tě to ale vyjde na čtvrtinu ceny a nemusíš na to čekat :)

[@burotoybiti9571]

Please do a SUP tutorial, please

[@noamhaberl3221]

What exact type of foam did you use?

[@stepangering8957]

eps

[@ethanhood1503]

How much was the glass

[@vargas.184]

Did you use EPS.?

[@stepangering8957]

yop

[@francescocannella4071]

Where i can buy an eps board with right dimensions?

[@stepangering8957]

just check the eps sellers near your place

[@adriancatayas441]

Can someone please tell me what are the needed things to make surfboard?

[@Surfmus]

Adrian Catayas Check my channel for it.

[@stepangering8957]

Hey, you need foam, some wood for stringer, fin boxes, leash plug, fiberglass and epoxy resin. And of course some tools like saw, sander, brush for epoxy and a few days of free time :)

[@pangrac1]

patláma patláma :)

[@timotheepladys7759]

What are the songs used ?

[@stepangering8957]

hi there, all songs are from great @twofeet

[@dylantheedamparry2466]

I love the board could you point me in the right direction of the foam you used please :)

[@Surfmus]

Dylan Theedam Parry EPS

[@cloroxbleach309]

How strong is it

[@damhanmcgettigan634]

Pretty strong u would go far to break it

[@adrianalvarez8861]

Song?

[@stepangering8957]

adrian alvarez two feet 👌🏻

[@marthatarunauli4821]

what fabric is used to coat the surface?

[@paikeakehlani5392]

Martha Tarunauli fibreglass

[@stepangering8957]

hey, yop it's fiberglass. be careful with the correct weight of it :)

[@christopheradams7942]

I knew a guy who, for lack of not knowing any better, glassed a eps blank with silmar 249 resin. Total melt down within minutes. Eps blank turned to goo.

[@stepangering8957]

lol he used pes resin not the epoxy right? :D

[@christopheradams7942]

@@stepangering8957 yeah it was silmar 249 polyester resin. The standard in the PU surfboard industry. I glassed boards for 25 years but got out when the talk about epoxy taking over started. And all the China boards started flooding the market. It wasn't quite the same after Clark foam shut down. But yeah, polyester and eps is bad news.

[@nancyhannan1977]

I have a Buddy Dumphy board. Can anyone out there tell me what it's worth? 70s

[@damhanmcgettigan634]

Probs from 80=190=240euro

[@ericsettineri6315]

Použil jsem Google Translate, jen v případě, že jste přemýšlel

[@deanbilton]

Spent all that time to make a board then you wakeboard......just make a wakeboard!!

[@stepangering8957]

it's because Czech Rep. doesn't have ocean, haha. We didn't want to wait till the surf trip so we just tested it on the lake.. :)

[@gregwebster8784]

It's impressive regardless. Think of how many people can't even build a decent board. Props to these guys!

[@stepangering8957]

Greg Webster Thank you Greg! 🙌🏻 It was a great experience and fun😊

[@chris65ktm]

He is wakesurfing dummy

[@kruntyart4291]

Try laminating the board first before u put in the plugs for your fins this adds strength to your fin sets as you add up to 4 layers of strength so your final plugs don't flex out of your board. Same goes for your leggy plug. Great try though. Also use machine sander with at least 80 or 100 grit and work down to 150. To get the bumps and uneven resin from your laminate.

[@johndoe-bu7vt]

hruuza. ale napoprvy je to vzdycky takovy...

[@hussainfazleali4122]

Real surfers know surfboards are carved from wood with a shell by a penguin. This sooo fake

[@quincywasaby1360]

iba todo bien y en serio la pintais con spray,y encima los acabados horribles

[@BobbyJetty1502]

That is the worst template I have ever seen in my life. Kooks

[@BobbyJetty1502]

I apologize for calling you guys kooks. It just is a really bad way to make a template. Next time you're going to want to use masonite it is by far the best wood for templates and it is easy to work with

[@saintnick8290]

Ghetto But a fun wake toy

[@fellipegomesrj.1300]

Q merda das grandes. Kkkk

[@brody4557]

what is the foam material you use?