Рет қаралды 18,079
Please turn on subtitles for explanations.
The walls of Daihatsu Hi-Zet Cargo S700V were covered with cedar wood.
The wall material used before was reused.
The thickness is less than before, lightweight, and easy to remove.
Again, the walls are unpainted to enjoy the fragrance of the wood.
It is easy to remove and install, so it will be easy during vehicle inspections.
I hope this will be helpful.
We would be very encouraged if you could give us your comments and evaluations.
If you have any questions, please feel free to comment.
Playlist of DIY car overnight DIY
• 車中泊DIY 2号機
Items used in this project
Cedar paneling, gap tape, previously used flooring material, cedar wood, plywood, M6 bolts
Tools used
HiKOKI [HiKOKI] 36V cordless tabletop slide circular saw 165mm
Amazon: amzn.to/3ld9Cc7
Rakuten: a.r10.to/hypoh3
Makita Drill Driver MDF347D
Amazon: amzn.to/36NwAOM
Rakuten: a.r10.to/hVVMEg
Makita Impact Driver MTD0001D
Amazon: amzn.to/3cLeh0w
Rakuten: a.r10.to/hli9ji
Makita 18V Rechargeable Random Orbit Sander
Amazon: amzn.to/3OUYuM9
Rakuten: a.r10.to/huiqmT
Makita Compatible Battery
Rakuten: a.r10.to/hV7pCk
Cone for drilling holes
Amazon: amzn.to/36I12bX
Rakuten: a.r10.to/hwC4fj
Dragon Tough Bit Set
Amazon: amzn.to/2O3QM8A
Rakuten: a.r10.to/hIobvP
Right Angle Ruler
Amazon: amzn.to/2WNlchW
Rakuten: a.r10.to/hzGIzg
Dowel Cutter
Amazon: amzn.to/2xK2SvP
Rakuten: a.r10.to/hznFtD
0:00 Opening
0:21 Vibration control and insulation
0:58 Installation of substrate
3:04 Installation of wall covering
5:04 Installation of opposite side
10:09 Fill and finish dowels
11:53 Curtains installed
12:33 Ending
#Diy #Van Build #Vanlife