DIY Tool to Improve Your Workshop

Explore a wide variety of content in our carefully curated KZbin playlist: • Binge-Worthy Content
Find more amazing tips at @TotallyHandyShorts #shorts

[@alphazuluz]

Cool, when my “workshop” needs a wire stripping tool, I’ll use this. But for the next 662 years, I’ll be good.

[@ft86]

😂😂😂😂

[@shadowflare99]

661 years and 6 months left

[@cuchillosowl3139]

Its for sell the leftovers from constructions 😏

[@nickdaveNDM]

Damn that would have been useful when I was running my scrap and recycling business, the copper is worth a lot and they don't pay shit for unstripped wire

[@unclejoe6811]

Tweeker

[@user-ec4lu2nl4d]

Это столько мудохаться чтоб провод расчепушить? Тиски и острый нож, всё,больше ничего не нужно

[@SergeyKhvorost]

Вот так же и рассуждают отечественные производители автомобилей. 4 колеса и тазик с верху тоже поедет.

[@user-yu5ce4du8j]

Я думал 🤔 чёт путное делает, ещё сверло испортил

[@FayzullinMarat]

для этого есть готовый спец. инструмент - нож с пяткой, быстро и безопасно чистит такие провода и легко помещается в карман

[@user-hz1xd1pm1r]

Доска 50 и просверлить отверстия под диаметр кабеля потом закрутить саморез.

[@user-ft7zu8fp4l]

Как сказал один доктор:" все самодельщики сами себе создают трудности в жизни, а потом героически с ними борятся..." сДоктор Дью

[@user-yx3iq7qz9k]

Называться страна дураков

[@user-lu6vk8ii1f]

Если добыча меди постоянна-то норм.

[@LUK42.0]

Step 1 to improve my workshop... making a continuous weld, not just tacking

[@0zmosis2001]

I sure do love these overcomplicated unnecessary tools

[@Dandydorf]

He spent his whole life trying to create a machine that could uncoat wires

[@qwemmewq3111]

Просто приятно наблюдать за процессом и музыкальная подборка огонь всегда!

[@juslangley]

One of the first rules of welding is tack first, weld last. Also, don't weld over magnets; you'll destroy the magnetism with heat. The magnet is to hold it in place while you tack, after which you remove the magnet and weld or you continue tacking whatever else you have to tack. Amateur KZbin welders will screw you up, man.

[@wesleyb82]

Also, am I wrong or do they all have way too much stick out?

[@ellisthornton8858]

@@wesleyb82 it's typically 1/4"-3/8" stick out. I run metal core so my stick out is around 3/4".

[@JohnJohnson-bg2oo]

@@ellisthornton8858 not bragging, but my stick out is WAY MORE than that!!😂🤣

[@wormyboot]

I'm planning on learning to weld someday. Comments like yours will be really helpful. Thank you.

[@yourdrummer2034]

This channels welding get all the welders going everytime. I know because I'm a welder! 😆 but yeah they refuse to weld properly on here and I'm sure have had many of these builds break at the weld. Especially the ones where they are ground off after welding them cold in the first place. And yes all the welding is cold! Lol! Brilliant & clever gadgets otherwise!

[@Lumencraft-]

Finally somebody making shorts tutorials that actually knows how to weld! Great work.

[@kzanderardenflaas2238]

You misspelled tack.

[@cokkoc4647]

Такой хороший провод испортил)

[@user-tf6vt4ix6c]

ДА ХРЕН С НИМ ОН СВЕРЛО НАШАХНУЛ

[@qwemmewq3111]

Да расслабьтесь чуваки, ему нравится мастерить чето, вот если тисков нет, сделал сам💪💪❤️😍успехов всем

[@user-yl1rd7wf4c]

Алкаши ножиком все быстро вскрывают.

[@user-fy1hi5hp8m]

۲۳ص۲۱۳۱۱۱

[@sergeyfokin1798]

Быстрее обжечь будет

[@justincasey_grabbederpussy6756]

Sober people do too

[@MrArmelias]

Алкаши просто обжигают. Делать им нечего ножиком резать

[@lex9365]

Ногтями

[@Anton-75]

250 из 250

[@user-sq7en5qn6s]

😂

[@helkorangmarian]

Вижу, у человека острая потребность освобождать кабель от оплётки в промышленных масштабах. Надеюсь, компетентные органы им заинтересуются. И потом он будет изготавливать уже другие, более полезные поделки.

[@trentstrom4496]

Yeah actually as an electrician that's pretty neat.

[@pavelgooner]

Костер вышел из чата

[@MrFormatcevt]

Может оболочка силиконовая :)

[@onyxwolfarias6523]

njce cold welding technique u really nailed the editing also arnt diy supposed to be like not something u need 100 tools fpr

[@p_campbell]

I own a wire stripper. That is actually manufactured. It paid for itself the first time I used it. A whopping $100

[@dsrinbermudes7594]

Speechless. Could've made same tool with 3 objects.

[@user-nz2nv8iq4v]

Я реально херею! Дома, в гараже и мастерской наверняка от 3-х до 5-ти ножей лежит! Но нет же… «Лучше день потерять, потом за пять минут долететь» 🤣 чекнутый

[@evgeny_se2461]

ЗОВИТЕ ДОКТОРА!!!

[@Andariel_13]

Вот когда тебе надо будет очистить метров 300 кабеля в виде огрызков посмотрю как ты к концу сего действа пальцы будешь ощущать.

[@user-jm2kk9uk7u]

Ну тут я не согласен, если надо вскрыть бухту длиной метров 200 ты усрешся ее страгать

[@user-di5gh7tm6z]

@@user-jm2kk9uk7u совершенно верно. Так запросто умелец взял и рассказал, что и в каком объеме он будет распрягать. Показал с какой скоростью и то, будет!...

[@user-vq6xr5wx3i]

техноонанизм как он есть

[@craiganderson8232]

Well so happens l need this thankyou sooo much. Your workshop looks great. Keep up the good work.😎👍

[@user-hp8kj2ev4h]

Тот кто ворует много меди проще и быстрее обжечь на костре

[@user-ty6in4en1s]

Лак это вес. Сдавать нужно лакированную медь

[@user-vc1dj4ct6r]

@@user-ty6in4en1s да? Я об этом не знал!!!! Просто сдал медь в металолом.

[@mpalaskokkalis1476]

Perfect.

[@berilium9730]

As the honest electric cable thief that I am, I tell you that this tool looks very useful...😜

[@marcuswilson8675]

Excellent idea

[@SKinLaB420]

Bump Tack Weldicus

[@user-jr8yv3rl6v]

Спасибо. Но у меня нет ничего того что было в видео. Но у меня есть канцелярский нож. 🤷‍♂️

[@user-rg3lp6uf2y]

Этот путь приведет тебя к успеху))

[@user-rg3lp6uf2y]

Знаешь почему?

[@sergeyfokin1798]

А у меня спички

[@user-tj6dq4yj8k]

Вот как халявщики хотят облегчить себе "честно" наворованное добро превратить в деньги , и может быть заработать срок .

[@thepoliticalgunnut8018]

My soul warped when that drill bit was destroyed.

[@stuartsharples9520]

Those guys that steal wire , well you have made there day ...🤣😂

[@kevincollins8014]

This tool would only be useful to crackhead copper thieves but they'd probably scrap this contraption along with the stolen copper 😆

[@taintedsasquatch398]

What shop needs this?

[@MNDashcam]

You can see those welds have absolutely no penetration and they're just tacked on the surface.

[@yourdrummer2034]

Yup. They weld cold on EVERY video

[@turboflush]

Add a spring to the cutting plunger

[@dorianvondix1673]

Ок. Намного лучше чем большинство самоделок. Но хорошее сверло можно было и не портить.

[@bonniebloodworth999]

A lot of work to get that copper. I hope there’s more where that came from

[@andriyshapovalov8886]

Didn't know junkies have workshops for that 😂

[@23william90]

Anyone else think that was licorice

[@thegoldennugget59]

The laces

[@dumbestoyster]

I've never needed to strip an entire wire. Unless you were a scrapper stealing wire...

[@11jerans]

Cable strippers are like $10 at the local hardware store

[@ohtee559]

Funny how it didn’t warp when he just immediately welded one side

[@ahmatai4215]

3 самореза и всё готово. А тут на неделю работы

[@genaugmen4505]

Okay, so now that I've got that one wire out the way, let me move on to another project

[@persinauroaramayo9286]

Admiro esas ideas, maestros

[@FugitiveTSi]

I always start off interested then end up mad. Like why. Make something useful not a complex device to replace a razor blade

[@WhyIsItSoHardToMakeA]

You ever stripped a lot of wire? It's a PIA with just a razor blade.

[@FugitiveTSi]

@@WhyIsItSoHardToMakeA dude for like $7 bucks at harbor freight go buy some wire strippers. This nonsense is a waste of time and resources. Probably cost more in just welding gas.

[@theloniousm4337]

or you could make a wire stripper from a chunk of 2x4 with a notch in it and an old box cutter blade in about half the time.

[@timlaxtonsr3729]

OK now do a version for house electrical wire..please..

[@williampettite1431]

Cool I'm going to make one thanks 👍👏😎🍺

[@Farage528]

Very clever 👏👏👏🙌👏

[@Dan-xf7bh]

I love the fact on this channel make such high quality tools, but at the same time to be useless for any practical Workshop

[@calvinthefly]

high quality?! you could disassemble this thing by hitting it with an iphone. without even breaking the fucking phone!

[@rastaclub6673]

Жалко сверло

[@MAKAR_3.14]

А мне ОЧЕНЬ жалко!

[@hillbillyredneck]

When I was growing up stripped wire with just a knife. I literally stripped tons of copper wire with my knee and my knife. I guess this will work but when you are saving money the last thing you want to o is spend money buying parts to make the gadget. When I got my first old timer in kindergarten. Now people don't know how to use a knife or if they are even allowed to carry one.

[@akeecheyta]

Work smarter not harder

[@BeastOuncelifeian]

Old timer bear claw, 8yo.

[@ravindranathkokki]

A scrap vendor just burns the insulation

[@samuelkatherinediozarago7692]

Making a freaking wire stripper improves workshop...yeah right..m

[@fowrunnah]

Incredible!

[@mealex303]

im surprised your magnets still work 😅

[@robmcclure481]

That's absolutely a perfect tool if I ever decide to start stealing copper because you get more money up to coding drop it I heard I'm pretty sure they make a machine that does this already it's probably expensive as hell but it does a bunch of time

[@Rotorhead1651]

Okay, so you've built a device by which you can quickly and easily strip all of the insulation off of copper cable..... .....to what end and purpose? I've been a mechanic for 4 decades, and the ONLY reason I have EVER need to strip ALL of the insulation off is IF I were selling the copper wire for scrap. This has not happened very often. In fact, it has occurred SO rarely, that the time and materials spent fabricating this device would be saved by simply using a utility knife. Also, what was the point of using multiple tacks to weld the pieces together? Why not just run a bead at each weld-joint?

[@deniskomarov1107]

Извращенец , всё проще намного .

[@user-dq6cb9ll3x]

Кластер развёл, 15 минут и готово....

[@user-ow6eu1dj1v]

@@user-dq6cb9ll3x что такое кластер?

[@ghostrider19451]

A cutterknife does the Same Job , in the right Hands

[@leandrobarretoduran3803]

Fantástica idea...brillante

[@suzanneanderson4631]

Why do guys have all the cool tools???❤😊

[@kurtsketo6460]

DOPE...But i think I'll stick 2 my razor knife! Still have all 🖐🏻🖐🏻

[@user-os2ky1or4v]

интересно 🤔 а СИП тоже так чиститься

[@callitagain]

5 minute workshop hacks. I wonder when they're going to make a workshop eye piercing tool.

[@hellspawn3200]

Notice the guy, gloves dark jacket jeans, now I'm not saying he looks like someone who rips electrical wires from house, but he did just make an industrial wire stripper.

[@trex9194]

DIY? I think it would be cheaper to hire someone that welds for a living then spending thousands on welding tools. Not to mention the time it takes to be a decent welder. Just because you can put a weld on some metal doesn't mean it's going to hold. I've seen so many truck racks made where the welds break apart. I'm not trying to bash you because you're definitely a master at your trade. But that's my point... you make it look simple.

[@mrmidnight32]

Be cooler if dude actually knew how to weld

[@blackz9058]

This is made for a smartphone. Anyone who got one with a subwoofer? So why this music?

[@user-qe5rw3sb7w]

Теперь затраты отобьёт на сдаче медной проволоки 😁

[@bryantaylor4139]

For stripping out that copper wire you’ve stolen

[@user-ro5is7mw6o]

На западе это скоро будет весьма модное занятие...

[@jonathantatler]

What, if you're a cable thief?

[@user-xn4gx8gs3o]

Complimenti per la passione comunque tutto questo tempo nessuno cela più perciò il mondo e senza artigianato perché siamo diventati cosi

[@jonathanfisher8303]

Why destroy a good drill bit when you could have just used round stock and made a cutting edge on that

[@seenusamson7547]

Really Great Good Idea God Bless You

[@kurtsketo6460]

POOR DRIL BIT!!!

[@brunococchietto7496]

Pretty complicated machinery just to strip some wires.

[@markabbott4163]

Great addition to your stolen copper wire sales.

[@user-bs1wp8wv1l]

Весь инструмент и тиски абсолютно новые, мастер- фломастер ,все ради лайка

[@Archall]

Очень нужная штука.жаль что не регулируемая.у меня обрезки короткие после расключки

[@Mmouse_]

Why do I need to strip a load of cable?

[@apple_1829]

Yes, but why make this when you can cut a wire with, I don't know, a box cutter.

[@user-db7fi6cb4s]

굿 아이디어 👍

[@heybacchus6899]

Could've used this when I stripped an old house for its wire while smoking too much meth

[@calvinthefly]

yes. this "tool" seems to be the exact thing someone whos smoking to much meth would build.

[@heybacchus6899]

@@calvinthefly "homemade" tool

[@gassanhottab]

Я бы из-за этого проводка не стал такой хуйней заморачиваться)

[@AS-vo8sy]

За хотел сделал, творческий подход.

[@emba_dareepolreeiiith1063]

what is the brand of your welding machine

[@MyEclipse1998]

Какой сложный способ испортить провод

[@user-dn6mm2rq8s]

Ахааха. У нас такое с КОГ 50 не прокатило бы)))

[@LordNemoTGH]

You need to delete this before the tweekers see it. Nobody will have power.

[@user-bi6yf4jx9d]

Перемудрил сам себя.

[@Darremedy1021]

Kalakal Moves :)

[@tummytub1161]

This is really cool, simple, cheap, easy to make and effective!

[@blaineshedd6242]

Dude can't even lay a bead

[@yourdrummer2034]

This channels heard it from me 100 times alone, let alone everyone else that posts it.

[@esenkz4571]

Как называется этот тип сварочного аппарата? Дайте знать пожалуйста)

[@amamamam1111]

полуавтомат

[@Bozolips]

All that for a insulator cutter?

[@martindepaz8364]

I hate this tack weld stuff …. If you have the opportunity to weld it just run a bead ….. I get the tack fury obviously but when you nice clean 1/4” flat stock it’s begging for a bead lol

[@-blaze-payne-193]

way to well up lmao😂😂