oh sweet, so thats how 100% electronica gets their effects
@jacopocondo60024 жыл бұрын
Circuit bending and AESTHETICS. Love.
@GoCreateSomethingАй бұрын
So.... You could run the audio from a DAW out of your computer into that and go ham? Or a keyboard, or a guitar? Then you could run white noise in the DAW through a notch filter, comb filter through a chorus or any other kind of effect and see what that does. That sounds like a good time! You know, I wonder if it would be worth while to run different audio signals into each of the three color channels.
@johnschade63433 жыл бұрын
amazing! I would be so interested in learning about how I could make one at home. must be so satisfying to work on something like this and finally plug it in & see them colors :)
@LoFiFuture3 жыл бұрын
Have a gander at my website lofifuture to find the original guide I wrote that was followed for this build! I want everyone to know how to put these little feedback systems together. Video synthesis fore the masses!
@bitface113 жыл бұрын
@@LoFiFuture amazing!
@Aristedes_Mr.Melody_TM3 жыл бұрын
The last few minutes are worth the whole video! Super #VideoArt!
@jordanWAH Жыл бұрын
After seeing a video about the hypno, as ridiculously cool it is, it's price is just ridiculous. How something based on the rpi4 can sell for $600 is beyond me. So this is refreshing to me. I like it.
@irregularlyregular8 ай бұрын
Why? How much would this cost if it was available to purchase?
@jordanWAH8 ай бұрын
@@irregularlyregular like 600 last I checked
@atomictraveller2 жыл бұрын
a lot of the current machines are pretty naff but this cooks. the "winter freeze" does have nice amendments but the constant feedback of this build is essential. watching you use it i'd try continuous x-y offset knobs instead of the buttons. i'm not commissioning anything but i'd try and follow a schematic for my niece. nice. it's about as fluid as i remember the best results of analog feedback being, keen that you've got it in a machine.
@StephenMcLeod3 жыл бұрын
This thing is amazing.
@ArkaHtun2 жыл бұрын
Nice job , really organic
@YOVOZOL3 жыл бұрын
very impressive! was this built from scratch or does it hijack an existing video circuit? stuff like this gives me hope future analog glitch artists won't have to rely solely on this discontinued analog video gear that is becoming more and more rare
@phobosapiens3 жыл бұрын
He has more info about on his site but here's the main setup needed: www.patreon.com/posts/low-cost-video-33131406
@admsmth_473 жыл бұрын
Haha no way. Shout out Adam Kane.
@kingstux2 ай бұрын
This is inspiring ! How did you implement the CV for RGB ? I tried using vactrols but the colors are too dark. Only potentiometers work great.
@electricarchaic4 жыл бұрын
Well yeah I need to make one of these!
@BrowsSmellLikeShit3 жыл бұрын
I love this so much
@BrowsSmellLikeShit3 жыл бұрын
the audio reactive stuff is awesome
@lukasheat64122 жыл бұрын
so awesome bro
@sleepy_onion483810 күн бұрын
This is awesome. I’m not super familiar with the connections. Can you run hdmi in or out of this thing?
@TheAuralab2 жыл бұрын
💚
@desiluus4 жыл бұрын
super awesome!
@poribrutal3 жыл бұрын
love u bro
@ArtParsegov3 жыл бұрын
Epileptic trigger gadget
@hey1inn4 жыл бұрын
YESS!!!!
@luctmelod4 жыл бұрын
excellent!
@sentient86534 жыл бұрын
Can we get a demo with video input beyond the signal generator? I want to see some images chew on themselves.
@splinter_mouth3 жыл бұрын
This looks awesome, great work! I'm looking to get start with some DIY video stuff. I was just wondering if the up/down and left/right buttons could be wired to a joystick ? Instead of having to press the buttons repeatedly to scroll through the menu, you could just hold the joy stick in the right position to boost the saturation or whichever parameter, or would that not be possible ? Thanks for posting these videos up and keep up the great work !
@gleix_3 жыл бұрын
Thanks! That should be doable; I've considered this a lot but haven't implemented it properly though I did try it with a few cheap joysticks. In practice it feels less than ideal but there are ways to make it work. By default the way that the buttons work is that a message is sent when the circuit is closed, so every press of the button makes a single *tick* of an adjustment. For the joystick itself, you'd probably just want a 4-axis one that can close separate circuits when in the up/down/left/right position - sort of like how the atari joystick worked. Super basic. You'd then need to design an additional circuit that will repeatedly close the desired button's circuit at a pre-determined interval that the existing button circuit is still able to interpret (ie. not too fast) and use the joystick to turn those circuits on and off. So basically just like a "turbo button" on those old third party console controllers. There would definitely be some advantages to being able to hold a direction to make larger adjustments, but it would also remove some of the precision afforded by using individual ticks for direction & parameter adjustment, so you'd probably want to have those available as well.
@arduinosoundlab60603 жыл бұрын
That's amazing, really good work.. could you tell me any info on the small screen/monitor you used in the demo? Thanks
@OwenKirby4 жыл бұрын
wow! fantastic device!
@jenskuhnemann1241 Жыл бұрын
Hi, I have a question, after connecting the two converters and looping the signal I am getting a mainly green picture and have to shift the hue quite a bit. Is this normal or should the signal on all be similar and I might have created cold solder joints. Used led solder, maye there was ledfree used on the board before.
@Ouefdie Жыл бұрын
How is the external input processed? just a Transistor?
@oouje3 жыл бұрын
Hey! do you know anything about Dirty VGA? It's like putting knobs and switches in the middle of a VGA cable but i haven't found any info about it other than a comment in Reddit, thanks!
@bronastyxd48073 жыл бұрын
Is that a mf Station Square theme remix? Omg
@megan8494 Жыл бұрын
Where would i get a small screen like that?
@yekky223 ай бұрын
How much do u typically charge for one of these
@JA-gt8cr3 жыл бұрын
Does the menu have to go to the main program output or can it be assigned to only go out to the monitor?
@enpugin Жыл бұрын
My brain began to melt around yhe 9min mark onward.... 🫠
@originalfallinggirl2 жыл бұрын
I want it! How do in buy?
@dominiquel92883 жыл бұрын
wait so I can use a music synthesizer to get the effects ? or do I need a video synthesizer?
@janmarek34083 жыл бұрын
this is simple kzbin.info/www/bejne/Zpippnx-r8aJjM0
@chkbt3 жыл бұрын
Yooo are these still for sale 👀
@intoishun25563 жыл бұрын
I would love to buy something like this, should I contact you through your website?
@gleix_3 жыл бұрын
Hey there! Yep, that's the best place to do it - I've got a dedicated contact form for video synth commissions over at www.gleix.net