I ordered 12.5mm for the fronts and 10mm for rears for my e39 530i. I had not seen this video. My 12.5mm fit like a glove but the 10mm had the exact rocking motion shown here; the wheel would not sit flush against the spacer. Ordered another set of 12.5mm for the rear. Wish i had seen this video before. Or I wish they would have included a link to this video on the 10mm and 12.5mm product descriptions on the site. I still would not have know which would fit but i would have done a better job of test fitting before installing.
@davideaton119211 ай бұрын
Great video. I'm leaning towards putting spacers on my 2014 Audi S5. You're stock Audi wheel in the video is exactly like mine.
@Bytrl4 жыл бұрын
I'm loving that blue
@jasondonaldson21509 ай бұрын
I ordered spacers for my 2024 Nissan Altima SR. I ran into that situation you talked about with the chamfer on my OEM wheels. The center part of the spacer doesn’t seat all the way into the original rim. The rim rocks in all directions on the spacer. The specs for my car suggest that is has a 66.1mm bore, which is what I ordered but they still don’t seem to fit. Is there a way around this?
@rogerklotz74714 жыл бұрын
So basically I need to a run 12mm spacer on my aftermarket wheels (rotiform blq) so it doesn't rock back n forth like how the 10mm spacer does?
@ecstuning4 жыл бұрын
Yes, give a larger spacer a try.
@rogerklotz74714 жыл бұрын
Okay thank you for the response!
@TRHardware Жыл бұрын
Is it not needed to actually lock the spacer itself with log nuts before just running through the rim bolts?
@rodrigovillar45255 ай бұрын
Hola amigo, una vez realizado, se recomiendo hacer una alineación a las ruedas / Hello friend, once done, it is recommended to make an alignment to the wheels.
@ads76863 жыл бұрын
How can i find out if my aftermarket wheels will have chamfer with the 10mm space
@cansavuralАй бұрын
the Audi's SPEC is on fire
@MarekGrubala10 ай бұрын
Is there any sense to add spacers to MiniVan (chrylser pacifica 2300kg)?
@Guilhermepalmeida4 жыл бұрын
Didn't get one thing clear. So you've talked about the hubless spacers but did not cover how to proper install it....Is it safe to use one of these?
@Gabgzz11 Жыл бұрын
So will the 12mm or 15mm spacers fit my Audi A4 b9 2018? Since the 10mm won't? The website says it does not fit my car?
@pedrocols8 ай бұрын
Which spacers fit the Alzor 628 wheels?
@_Thale_4 жыл бұрын
Cool stache by the way!
@AndreiCristt11 ай бұрын
Hub centric rings are needed only for the aftermarket wheels or even for the OEM wheels ? Thank you in advance
@Florida_Boi_3335 ай бұрын
Usually with aftermarket wheels because they (usually) aren’t the correct center bore as stock
@DutchDukeMan Жыл бұрын
i personally put the spacer on the wheel first and then install the wheel like normal with the spacer on it.
@dennisflores63444 жыл бұрын
I need wheel spacers for a cadillac 2013 srx 6x120 do u guy have those or make them
@115zombiees3 жыл бұрын
So I got the 10mm and my wheels sit at a slant and wobble when I drive, should I go with 12mm? Or go humblest spacer, plz help 🙏
@vk45dett2 жыл бұрын
Can u use 45mm bolts for 10mm spacers ? Bmw m4
@TheNanofiber10 ай бұрын
Do you need a wheel alignment after install? Thx
@NhatNguyen-xs7kl9 ай бұрын
I don’t think so, since you aren’t messing with suspension parts
@Florida_Boi_3335 ай бұрын
Probably not. Would you get an alignment going from say a 225 to 235 tire?
@Ali-Muscle4 жыл бұрын
So that’s why my vibration is amplified since I’ve put on the spacers
@OCANALDOMARKITO2 жыл бұрын
When i took out My 10 mm spacers they were broken
@zrlfoo4 жыл бұрын
I had the same issue with ecs 10mm spacer on my OZ wheels. You talked about the issue so what’s the fix? Or how to find the right spacer spec?
@ecstuning4 жыл бұрын
Best bet is to try it on your wheel without mounting. If you have issues you can return them as long as you don't install it onto your car.
@cobaltpica4 жыл бұрын
i’m on OZ Racing Leggera HLTs on my 2018 A4 B9. The OZ wheels have a centre bore of 75mm and the 10mm ECS tuning spacers have a “hump” of 70.5mm on the back of the hub centric lip. To solve the fitment issue, i ordered a set of OD 75mm x ID 70.5mm x Width 8mm hub rings. My OZs now sits flush with my fenders with the spacers installed. No vibrations whatsoever. 😺👍🏼 www.amazon.com/NB-AERO-Aluminum-Centric-Hubcentric-Centerbore/dp/B07GD2GM3X
@jasmine83843 жыл бұрын
Do I need to increase the wheel torque after the spacer install or same as before?
@86Junaid.4 жыл бұрын
What is the torque spec? Just received mine and have a slight vibration on 160km/h+ Might just rebalance my wheels at the same time.
@86Junaid.4 жыл бұрын
Mk7 gti - flush kit
@Zaudi_Jonas3 жыл бұрын
How long is that Wheel Hanger?
@sheepmanproductions4 жыл бұрын
I've done the install as recommended on my GLI with 12.5mm up front and 15mm in the rear, but I still encounter a vibration felt in the steering wheel and seats around 75-85 mph. When the spacers are off there is no vibration. Do you have any suggestions as to how I can eliminate the vibration?
@ecstuning4 жыл бұрын
First, check the balance of the wheels. Vibrations will be amplified with spacers. Second, make sure there is no chamfer interference between the spacer and the bore on your wheels. Lastly, ensure they are torqued properly. In odd situation, you may have a defective product, and we can measure your spacers if you still have issues. Please check over the first three tips.
@omergilert73554 жыл бұрын
I also buy this ecs spacers for my a3 8p and i also get the vibrations you say. I think its not center properly and this spacers are garbage
@jboesz65693 жыл бұрын
@@omergilert7355 I bought ECS 8mm spacers. I hate to say it but I agree. I should’ve just bought 42 Draft Designs spacers. They never did me wrong.
@shibidi3 жыл бұрын
@@jboesz6569 I have the 8mm spacers too and they vibrate like crazy at 55mph. Did you get this fix this issue?
@jboesz65693 жыл бұрын
@@shibidi I apologize for the late response. I took them off. The wheel fitment look fine without them.
@voongnz4 жыл бұрын
Thx
@alfonsobecerril61314 жыл бұрын
Hola para una suv BMW X1 F48 2107 unos spacers es recomendable y no perjudica la suspensión y las ruedas
@franciscomedina53324 жыл бұрын
Hi, just what I'm looking for for the back of my vw Sharan 7m 05 truck, I have oem 17 "wheels and I would like to fit this 30mm spacer if it fits?
@ecstuning4 жыл бұрын
You can try it and return it if it doesn't fit.
@tahirotahir3 жыл бұрын
After adding 20mm spacer, do I have to put new extended wheel lug bolts?
@zarifhossain88173 жыл бұрын
yes
@maks_sp33d962 жыл бұрын
Yes, they should come with the spacers tho
@isiahemerson9803 жыл бұрын
I put 04 golf wheels on my 96 Camry and it’s rubbing on the back struts which is causing a wobble with 16x7, 5x112… what should I do.
@dumbeezy54803 жыл бұрын
Different hub bore size maybe? 04 golf wheels are 5x100. Idk what lug bolt pattern the 96 camry is
@samgab3 жыл бұрын
Thanks for the informative video. I have a 2017 Audi S3 8V Sporthatch, with factory 19" wheels. I am looking to get wheel spacers all around. Can you please recommend a thickness that will ensure I don't have to make any modification to the wheel arches etc, and won't get any rubbing or tire contact issues, including on the front from lock to lock, and even on full suspension compression? Cheers!
@_NB233 Жыл бұрын
Did you ever figure this out
@samgab Жыл бұрын
@@_NB233 No... still on factory rims. I think 40 offset will work, but I'd prefer to check they don't rub first.
@samgab Жыл бұрын
Sorry, I mean 40 offset in new rims. Wheel Spacers are completely illegal in my country, believe it or not...
@exthvn4 жыл бұрын
I realize after watching the video that I put a lot of anti seize than he did. Will there be any issues with that?
@bm_wuratli68835 ай бұрын
No if u have no issue in pad they shouldn't go in just wipe after long road slot ppl forgot that simple thing
@f1f2782 жыл бұрын
On his way to becoming Mr Potatohead... great video
@christiancastro86353 жыл бұрын
What rims are those ? The wheel he grabbed first?
@anthonynicolazzo7579 Жыл бұрын
I believe alzor replica rims or just actual audi S4 rims
@DFN21_4 жыл бұрын
Ooh what are those rims? The aftermarket ones lol
@matias74974 жыл бұрын
i wanna know too looool
@_Thale_4 жыл бұрын
Is it safe to drive at high speeds with wheel spacers on
@ecstuning4 жыл бұрын
Yes.
@startingtech39004 жыл бұрын
Hey guys I ordered the h and r spacers. But need to cancel my order and buy yo black 20mm in house brand. I emailed sales. Hope you guys get back to me I will try tomorrow it’s sat night rn
@johnviera38843 жыл бұрын
I’ve never seen a brake rotor with no lug nuts and holes for bolts.
@danrook57572 жыл бұрын
Welcome to German car ownership
@AxelDigital4 жыл бұрын
the stache
@sebizeries51204 жыл бұрын
Do you need new, longer lug bolts when using 15mm spacers or will the oem ones still work?
@ecstuning4 жыл бұрын
Yes, longer ones are needed and included in all of our spacer kits. We did the measuring for you!
@Sinister6_cuv Жыл бұрын
Do you guys sell lock nuts for the correct size spacers?
@knoleng85903 жыл бұрын
I'm using 25mm
@Otjmore3 жыл бұрын
Stache game strong
@alex4k3z4 жыл бұрын
nice video, I also have make some video about installing wheel spacers, welcome you to give me some advices.
@mehaboobkhan16694 жыл бұрын
Vw
@fredgasburger59694 жыл бұрын
What’s the point of a wheel spacer?
@ecstuning4 жыл бұрын
To clear suspension components or to make the wheel flush with the fender.
@JuanManShow4 жыл бұрын
So it's looks better, some car wheels a way too inside and would look subjectively better if the wheel was a bit more out and flush with the body
@cyclistman63583 жыл бұрын
IMO using spacers is a bad idea for several reasons. But if you need that look then it's your choice. Peace.
@dumbeezy54803 жыл бұрын
explain
@EvolutionSev3 жыл бұрын
@@dumbeezy5480 he’s spewing shit, it’s completely safe when installed correctly.
@pochopov3 жыл бұрын
who's gonna be torquing when doing a simple tire change on the side of the road? asking for a friend
@morganfreeman51714 жыл бұрын
They are a fast and easy way to ruin the geometry of your car and can badly affect the handling.
@ecstuning4 жыл бұрын
If installed properly, it won't effect handling. It will actually increase it.
@KasamS4 жыл бұрын
@@ecstuning turning radius is increasing depending on the offset of the wheels, slightly more strain on the wheelbearings aswell
@GenerationNoise3 жыл бұрын
who the heck torques lug nuts lmao
@ecstuning3 жыл бұрын
Errrm.....
@GenerationNoise3 жыл бұрын
@@ecstuning is that a grease monkey thing ...inside joke?...errrm....serious though just over torque the nuts .It aint gooon hurt a ting