Thanks for not dragging your videos out .. and you definitely have a great knack for explaining with much simplicity. So appreciated and well done 👍
@gertiefo6292 Жыл бұрын
Thank you…..super informative!… u are a natural teacher. ❤
@YouCanTotallyMakeThat Жыл бұрын
Thank you so much this has made my day
@beverlyfarnsworth76725 жыл бұрын
I have had all the Cricuts and Never used them! I've been to nerves. This has really helped me! I'm excited to cut trucks ornaments!!!! Thank you tons!!!! I have $$$$$ into die cuts and its the same ....non believer in self!!! Thank you for your encouragement! I will continue to learn from your lessons!!!! Hug's
@YouCanTotallyMakeThat5 жыл бұрын
You got this! Let me know how it goes and if you need any help along the way :) Hugs
@solschuller6 жыл бұрын
I love that you're very meticulous about how you explain and show every detail! I just love it! Thank you so much!
@YouCanTotallyMakeThat6 жыл бұрын
Thank you so much and your welcome :)
@adrianaariza-jones36946 жыл бұрын
Crystan thank you!!! I love it! can you make more videos with wood? I have this idea and I was going to look for something for Christmas ! You are the best ! love your videos !!!!
@YouCanTotallyMakeThat6 жыл бұрын
Adriana Ariza-Jones thank you so much I always enjoy you being here your comments mean so much.. I will be doing more with wood :) stay tuned
@kriskiefer-woolery53112 жыл бұрын
Thank you. Now I can confirm if I could use a wood burn pen in my maker. For less waste and less steps
@janetmannsdesign5 жыл бұрын
Thank you for your video I'm learning how to use my new Cricut Maker,
@debbiemorris57074 жыл бұрын
This is a great tutorial! I have an air 2 just got a maker. I’m so excited. This is something I really want to learn how to do
@lauriemartin54505 жыл бұрын
THANK YOU Crystal!!! I'm in the process of getting a circuit maker for Christmas,coming next week.(hope my husband let's me have it before) really learned alot from this video.it ended in the middle of what you where saying. Thanks for doing the computer part in video too, it explained alot.know more than I did a few hours ago. you answered several things I was wondering about. keep up the great job. looking forward to other videos. Thank you again..
@josey998 Жыл бұрын
Where do you order the wood from ?
@judydickson66655 жыл бұрын
Wow, love it, just the demo I needed. Thanks so much. I am a decorative painter and you could not cut this out on a scroll saw so easily.
@cMrob735 жыл бұрын
I use the scroll saw. The only problem for me is the thickness. The 1/16 is too thin for my projects.
@hiamfamily83584 жыл бұрын
Thanks you did great!
@Jeff_Eats_Local5 жыл бұрын
Awesome video and great job on explaining all the details!
@YouCanTotallyMakeThat5 жыл бұрын
Thank you :)
@olajokesjourney6 жыл бұрын
I am encouraged to see the thickness of the wood, so this will definitely cut my 8oz to 12oz canvas or denim fabrics? I am looking to purchase my first Cricut, is th Cricut Maker better than the Air?
@YouCanTotallyMakeThat6 жыл бұрын
Yes and I would for sure go with the maker so you have more option on what you can cut
@saurebhtomar4 жыл бұрын
Maker’s the best!!!!!!!
@ThePaddlergurl3 жыл бұрын
Where do you get your wood? Is it available on Amazon?
@assyriannahrin3 жыл бұрын
Can this be done with silhouette? What a great project
@lekisha156 жыл бұрын
Keep the tutorials coming! Thanks
@adrianaariza-jones36946 жыл бұрын
I got to your live video late ! ...I love your videos !!! thank you for sharing .
@YouCanTotallyMakeThat6 жыл бұрын
Adriana Ariza-Jones your so welcome
@gwynnwischhusen68804 жыл бұрын
Very helpful w details
@Cindymamasita5 жыл бұрын
any luck on cutting small items with intricate details like a cardinal around 1 1/2 inches? and if so, what wood did you have success with?
@kymrobeson66316 жыл бұрын
For painting and putting back in machine idea, wouldn’t it be better if you paint before cutting? Figure out placement leave a little extra space between images and tape for no cross over of paint. In this project paint circle area then put in machine to draw (write) and cut, I think it would be easier than trying to line up perfectly.
@YouCanTotallyMakeThat6 жыл бұрын
Kym Robeson I will test this out this just might work thank you
@kymrobeson66316 жыл бұрын
You could put ruler next to bar with the white star rollers before moving and take picture to know exactly where they were
@YouCanTotallyMakeThat6 жыл бұрын
Kym Robeson that is super smart thanks for the tip
@HouseScraper6 жыл бұрын
hello crystal I love this great idea
@dileniahernandez64186 жыл бұрын
Thank you I love all you videos!!
@YouCanTotallyMakeThat6 жыл бұрын
Dilenia Hernandez thank you so much this means a lot thanks for watching
@missebb113 жыл бұрын
What kind of laptop do you have? design space will not let me cut wood using my ipad
@YouCanTotallyMakeThat3 жыл бұрын
I have a MacBook Pro but also the MacBook Air :)
@siobarron24903 жыл бұрын
Which needle are u using on the maker and what kinda of wood is this
@saramcgee57866 жыл бұрын
Love it 👌👌👌
@YouCanTotallyMakeThat6 жыл бұрын
Sara Mcgee thank you
@Truecrimequeen684 жыл бұрын
Where do you get the wood? Ty
@guadalupemtz.c.69484 жыл бұрын
Hi i will like to know if acrylic works as well?
@tdeniseechols74344 жыл бұрын
What would did you purchase for this? The wood ive been buying won’t cut all the way through and I can’t figure out why.
@cyanbeam2 жыл бұрын
Do you change the pressure to cut wood?
@christinascollections68876 жыл бұрын
LOVE!!
@YouCanTotallyMakeThat6 жыл бұрын
Christina's Collections thank you
@TEAMRAMPAGE236 жыл бұрын
Oh a long metal spatchla Would be great for this
@KrisYoung-rw6hs6 жыл бұрын
I send in comments all the time to Cricut to update the website so it doesn't cut out while in project. I called and talked with customer service rep and she helped me clear my history that helped, but didn't solve the issue. Very cute!
@YouCanTotallyMakeThat6 жыл бұрын
Kris Young thank you so much I agree they need to focus on that design still lots of flaws for sure
@noreencheckie35686 жыл бұрын
What pen tip did you use, fine or med? Great idea Thank you
@YouCanTotallyMakeThat6 жыл бұрын
Fine :)
@foscoe24962 жыл бұрын
What kind of cutter for the Cricket three blade
@dannyvega49474 жыл бұрын
Where can I buy that wood and what blade is used?
@FarazKhan-od9vx3 жыл бұрын
Hi, can you please leave a link for the wood your purchased, along with a link for basswood and balsa wood, that can be purchased from HobbyLobby, for the Cricut Maker?
@YouCanTotallyMakeThat3 жыл бұрын
It is sold in store only its by the airplanes and model cars :) Hope this helps
@FarazKhan-od9vx3 жыл бұрын
@@YouCanTotallyMakeThat ok, what the material called, do you have any information about the material to help me narrow down and be able to pickup the exact material in store?
@ek1rst3 жыл бұрын
I tried using a 1/16 balsawood and the cuts are not going through and end up breaking the design when trying to separate it. I also used basswood, although it also breaks, I was able to get something finished compared to the balsa. Not sure what I’m doing wrong.
@TouchOnTap2 жыл бұрын
I was also wondering what type of wood is best
@cathymiller44895 жыл бұрын
Just found your KZbin. Excellent tutorial. Fantastic tips. So I have a question, can you cut on fast mode for the Maker or Explore Air Two or is the wood to fragile?
@YouCanTotallyMakeThat5 жыл бұрын
It takes the option away when you choose wood. Hope this helps
@darlenevenus43985 жыл бұрын
just now watching your wood ornaments. I tired to make one but mine cracked and broke before it was done cutting. Not sure what I am doing wrong.
@marypoet14 жыл бұрын
Can i make horror ornaments like with Michael Myers? If so, how? I'm new to cricut maker and i don't know anything
@lauriemartin54505 жыл бұрын
ps.. how many cuts do you get with one blade, can you tell when it comes time to change it? thanks
@mahonnajames69315 жыл бұрын
Hello nice what kind of wood is this and the depth 1/4 or 1/8 also what is the name of the cutting tool?
@marilu1915 жыл бұрын
Mahonna James Cricut maker
@daliliahdavila10882 жыл бұрын
Where can I find this wood
@maritafuenla5 жыл бұрын
How many time cost you cut this??? Thanks you in advanced
@solschuller6 жыл бұрын
That is so helpful! ❤️❤️❤️
@YouCanTotallyMakeThat6 жыл бұрын
so happy to hear this :)
@Sabrinicoles5 жыл бұрын
What is the difference between the explore air 2 and the maker?
@jhroche755 жыл бұрын
Have you tried 3/32” bass wood?
@staceylyles39925 жыл бұрын
Im using Balsa wood 1/16 and my knife will not cut through it. I didn't realize I need to tape it down. Could that be the reason why?
@kubectlgetpo5 жыл бұрын
Investing in a low end Laser cutter sounds like the right to for wood
@lisaweaver31246 жыл бұрын
Hi Crystal what kind of wood did you say you used and the thickness?
@1404Arwen Жыл бұрын
Want to know too
@1404Arwen Жыл бұрын
Balsa wood
@firstlearning13155 жыл бұрын
can we cut corrugated sheet of 5mm thickness .. plz reply
@YouCanTotallyMakeThat5 жыл бұрын
no you cant only up to 3mm thick
@laujntshiabsi87513 жыл бұрын
Can you put a lists of wood you used and worked on the comment?
@AllThingsShaunda2 жыл бұрын
Can you ungroup an image that you uploaded to design space?
@danatuyenbutler34532 жыл бұрын
Where can you purchase the wood?
@darlenefrederick84442 жыл бұрын
Hobby Lobby, Joann's or Michaels
@sandymertes51045 жыл бұрын
what blade did you use?
@YouCanTotallyMakeThat5 жыл бұрын
The knife blade
@olajokesjourney6 жыл бұрын
So are you using your computer or Laptob to get the design you are about to cut out? Do you then download the app on your computer. My apologies. I am learning about this before I make purchase.
@YouCanTotallyMakeThat6 жыл бұрын
I use my laptop I downloaded the app but I never use it as its just a link to the website
@tiffanysupertzi30845 жыл бұрын
Can the cricut maker cut 1/4” wood or 1/8”?
@YouCanTotallyMakeThat5 жыл бұрын
1/8 hope this helps
@cMrob735 жыл бұрын
@@YouCanTotallyMakeThat oh. So it can cut 1/8. But does it have to be bass or balsa wood? If so, does it have to be a certain type of cricut? Just checked with cricut and they said it cuts up to 16th of an inch. I'm confused.
@iamsunflower20115 жыл бұрын
What kind of wood is that again?
@gemini0225 жыл бұрын
Its Bass WOOD sheets she is using. looks like 1/4 inch
@barbarataylortatum77166 жыл бұрын
is it calibrated wrong , I had that problem went to mate not sure how to do that yet
@YouCanTotallyMakeThat6 жыл бұрын
Make sure when you first get your knife blade you calibrate it first
@bobbiecavano23125 жыл бұрын
Can you cut veneer?
@georgeadams16652 жыл бұрын
why is it that my bade is not cutting threw no matter what i do
@xocaityperry5 жыл бұрын
Where do you buy your wood?
@YouCanTotallyMakeThat5 жыл бұрын
Hobby lobby
@xocaityperry5 жыл бұрын
CrystalAnn thank you!
@darlenevenus43985 жыл бұрын
Can you put iron on vinyl and adhesive vinyl on wood?
@YouCanTotallyMakeThat5 жыл бұрын
yes you can
@Hamad.Kuwaitt6 жыл бұрын
Very nice .. like and subscribe 👍
@YouCanTotallyMakeThat6 жыл бұрын
Thank you so much
@lulu2628315 жыл бұрын
)
@christinascollections68876 жыл бұрын
Where did you get the wood at?
@kymrobeson66316 жыл бұрын
Christina's Collections she said hobby lobby
@kymrobeson66316 жыл бұрын
I got some balsa wood at Home Depot just watch how thick it is
@YouCanTotallyMakeThat6 жыл бұрын
Thank you Kym yes hobby lobby thanks for the Home Depot tip as well