DJI MINI 2 AND AIR 2S - UPGRADE & DOWNGRADE FIRMWARE TUTORIAL!

[@dukenu100]

I had that sinking feeling in my stomach when I saw the error message (after needing a cable for android, having to fix the connector on my phone and other issues) and was ready to return the damn thing until I saw and fixed my problems with your guidance. I just want to say thank you so much! You don't know how much I appreciate this :)

[@InfinityDrones]

Awesome, so happy I could help.

[@carlosrod__]

ayuda en mi Mac no puedo hacer cambio los parámetros y no me aparece para volver al firmware anterior

[@InfinityDrones]

Dji does not support assistant anymore. Your only option is dronehacks

[@samulate1]

Thank you! Got my drone about a week ago and have not been able to get my firmware updated no matter what I tried! This finally fixed it for me though

[@InfinityDrones]

Happy I could help!

[@battery_wattage]

I got the latest Air 2S update which included Remote ID. Even though transmission is not necessary until next year, DJI did not provide an option to turn it off. I regret my decision and DJI made it virtually impossible to downgrade.

[@InfinityDrones]

sorry to hear that man... yeah DJI does not give us lots of options :(

[@m118lr]

Whoaaa, I’d heard this before at some point. THAT stinks. MY question..”HOW FAR” does a person go with the ‘LATEST’ updated firmware BEFORE realizing it’s TOO LATE..and you can’t reverse it? For instance, I haven’t updated my A2S in a WHILE..months. I STILL keep checking it (obviously) making sure it flies and responds with all the corresponding telemetry..even though I don’t fly a lot..

[@InfinityDrones]

@@m118lr Watch my Dronehacks 1.26 video and also check out the dronehacks birdmap: drone-hacks.com/birdmap

[@MICHAL4709]

This video isn't for dji 2 s because we can't install older versions of software

[@InfinityDrones]

@@MICHAL4709 yes this video is pretty old. As in the previous comment, watch my dronehacks 1.29 video.

[@JAKOB1977]

Hmm.. thx.. seems its possible. got the Air2, and been out flying and came home and not sure what DJI have done with their latest FW but the footage fidelity seems to have taken a downturn with a lot of pixelshinning / blinking in the grass and distance.. so hopefully you can downgrade your fw and get back to scratch. I really hope that aint a tactic DJI uses in trying to undermine older models in some rancid way to elevate newer models.

[@InfinityDrones]

You can downgrade using dronehacks. I've got a video about it

[@JAKOB1977]

@@InfinityDrones why should I use this dronehacks, if I can just use the official way.. I know this dronehacks are lubricating many social media channels where the moral bar aint to high' so they can sell these licenses.. I hope that aint the reason why your pushing that to me, when I can do it with official tools.??

[@joepaulabbott]

I was viewing this video trying to see if it would help me in solving a problem I started having with my RC Pro Controller and my Air 2s. I shoot a lot of sun rises and sun sets and stream my flights on restream to Facebook and KZbin while I am shooting. As you know in the Pano Mode the Air 2s will shoot wide angle and 180 as well as others. Up until the middle of June I could see each indivual live shot that was being taken in the pano mode for later stitching. About the middle of June, once I switch from regular photo mode to Pano Mode the feed to Facebook and KZbin becomes horizontal color bars. The Pano mode shots are clear on the RC Pro controller but the transmission to Restream and ultimately to Facebook and KZbin is not. Prior to this the streams from the RC Pro to Restream were fine on Facebook and KZbin. I was thinking that a firmware update may have caused this and I was going to downgrade to an earlier firmware. Any suggestions? Enjoy your channel.

[@InfinityDrones]

Hi there. I've never streamed while flying, but I can definitely say that flashing your same existing firmware or downgrade to an older version would be high on my list to try.

[@basretie5179]

I have the same problem with my Air2s. Restream worked fine untill a few weeks ago. Suddenly does nothing anymore. I have to use the stream url from youtube itself now to stream only to youtube. I did not find any fix untill now, and restream doesnt know what i am talking about when i mention drones. They suggest i reconnect youtube and facebook and try again .... wich i already did 10x but didnt help at all. The Air and air2s are on ARB (Anti rollback) software and you can not downgrade anymore.

[@InfinityDrones]

@@basretie5179 You can downgrade the air 2s, but it will cost your 40 euro. I have tutorials on my channel, just search for Dronehacks

[@troletti]

Nicely detailed video. However I did follow the instructions and I only get the option to refresh on the AIR 2S. Since your video dates back to August 2021, any chance this stopped working on the AIR 2s? Thanks

[@InfinityDrones]

Hi there. I just released a new video today that shows you how to downgrade. You'll need to purchase a license though.

[@boixaderafacundo8061]

I have the same problem my friend. I can only see the current firmware :(

[@InfinityDrones]

@@boixaderafacundo8061 Then your only other option is to go the DroneHacks route. I've make a complete tutorial video for you to follow. It's super easly.

[@boixaderafacundo8061]

@@InfinityDrones thank you very much for your quick answer! There is no other way than buy the license to get the downgrade right?

[@InfinityDrones]

@@boixaderafacundo8061 If depends... if your firmware has been locked by DJI then there is only one option and thats to purchase a license. If your firmware version has not been locked yet, then downgrading is free using the dronehacks application. (steps in my dronehacks videos)

[@xavierearnst6245]

This helped me a lot, I only have android devices and I cant get my hands on dji fly. finally updated my drone!

[@InfinityDrones]

Awesome! Glad it helped!

[@ricardofpt]

I thank you for the suport, but I do not have the options to downgrade. Even completing all the steps, I can only upgrade. Do you have a newer version of this video? or did something change? Regards

[@InfinityDrones]

I have the alternative way to upgrade firmware video. You can try that. But it does sound like you're on a version that does not allow you to downgrade anymore... There is no way around that. Only option is to send to dji

[@aerialtoolsaddict]

Any news about the latest Updates on air 2s? I've heard a lot of problem regarding air2s. All of a sudden the drone fell from the sky. Can you find out more about this issues thanks.

[@InfinityDrones]

I would use dronehacks (take a look at my dronehacks 1.31 video) and downgrade and unlock the nfz and altitude limits as well as enable FCC mode.

[@bobby0panganiban]

I tried this but the old version doesn't show up in the background anymore. Can you do another tutorial please.

[@InfinityDrones]

Yeah, dji has locked it out... I have another video called "Alternative way to upgrade firmware" that shows you how to do it using dronehacks.

[@baaao]

Great vid how about the rc?

[@InfinityDrones]

Thanks man. You can follow my 'alternative way to upgrade " video

[@Nuasa_lensa]

How do I downgrade the Mavic Mini 600 firmware?

[@InfinityDrones]

You'll need a Drone-Hacks license to be able to go to a lower antirollback version sadly. But then you can enable fcc mode and disable nfz and alt limits which is totally worth it.

[@MS-zi2ft]

Great Video! Everything worked fine, until I load the DJI ASS 2 and I do see firmware , but It only shows me the current one nothing old to select . How do I get the OLDER firmware to show up ? TIA

[@InfinityDrones]

This is my preferred way of updating or downgrading firmware. I use the Dronehacks app. Here is my tutorial: kzbin.info/www/bejne/j5XKqoJsZ8R2h6c Remember to never update your firmware unless you absolutely need to. Watch this: kzbin.info/www/bejne/oKrLm2B4ebeJppo

[@samsonlevulevu2566]

Drone is connected but dji assistant isnt picking it up. Just shows the display from 2:36. Help please

[@InfinityDrones]

What drone are you using and which dji assistant 2 do you have installed?

[@samsonlevulevu2566]

@@InfinityDrones thank you for replying. It finally picked it up. I wasnt timing it right switching on the drone and connecting the usb cable

[@InfinityDrones]

@@samsonlevulevu2566 awesome!

[@itgoesup3975]

Thanks man!!! Trying to do this for my mini 2 and Air2S but had no idea I needed the Consimer version of the DJI Assistant hell yea man!!!❤

[@InfinityDrones]

Remember not to upgrade you mini 2 past 0.300

[@divyaprakashdixit]

@@InfinityDrones what if done already?

[@InfinityDrones]

@@divyaprakashdixit What do you mean?

[@PowerfullNature]

I have a new macic air 2 drone and its fully up to date, can i do the downgrade and use hacks for altitude limit?

[@InfinityDrones]

Hi there. Check your firmware version and compare the birdmap on the Dronehacks website. But I'm thinking you won't be able to... I have a walkthrough video if you want check it out

[@PowerfullNature]

@@InfinityDrones my aircraft firmware is 01.01.0720

[@PowerfullNature]

@@InfinityDrones yes thank you, send me😊

[@InfinityDrones]

@@PowerfullNature kzbin.info/www/bejne/a4qmpp1nmrKXZ9k

[@InfinityDrones]

@@PowerfullNature that firmware is not supported, sorry.

[@eriveltonflorencio2840]

I recently did a few takes and noticed something that caught my attention, in the 'brusque' movements there is a 'lag' that I don't know if it's some framerate setting or similar. I recorded in 4K 30fps, I just don't remember if it was marked in H.264 or H.265. The drone is a DJI AIR 2S, is there anything that justifies it? After this video I did other takes, but none with the fast rotation movement. I reset the camera settings and it had no effect, I solved it on a palliative basis by changing the FPS to 60. My memory card is a LEXA 1066x U3 V30 A2 64GB I performed the test in two ways, with the memory card and without the memory card, and the result was the same. (IMAGE LOCKING WHEN ROTATING AIRCRAFT AXLE) This problem started to happen (at least I started to notice) after some firmware updates, as before these problems didn't happen (it even worked very well at 30FPS with the same memory card).

[@InfinityDrones]

Do you have a video or the issue? I'm not 100 % what your issues, but looking at a video might help.

[@SRSENTERTAINMENT2]

thank you so much.......very very helpfull video......i solv tha my problem seen this viseo

[@InfinityDrones]

Awesome! So happy to hear that! Thank you for commenting

[@droneskyline]

hello you have this version DJI Assistant 2 v 2.1.3, because the current version doesn't work

[@InfinityDrones]

Hi there! You can try the alternative way of upgrading/downgrading your firmware. I've made a tutorial: kzbin.info/www/bejne/j5XKqoJsZ8R2h6c

[@FauxHappy]

do you have a video on how to calibrate the mini 2?

[@InfinityDrones]

Sorry man I do not. There is special firmware required that is not to anyone outside of dji...

[@darylrocks2753]

Such a great video. It fixed my software. Why doesn't DJI have better update website. You have to be IT to figure it out.

[@InfinityDrones]

Totally agree! If you want an even better/easier solution you can take a look at my "Alternative way to downgrade/upgarde" video. Using the Dronehacks applicaton. MUCH easier!

[@FabioMarchi]

If i buy a new drone Air 2S, what firmware version comes in? I need to use a hack.

[@InfinityDrones]

Hi there, Check out my latest video. It shows you how to downgrade even a fully updated Air2S. Dronehacks 1.25 update. It means you can use the mode an all Air 2 and Air2S drones regardless on firmware version since you're able to downgrade. Remember to never update your drones firmware.

[@roar666]

Very helpful video, but unfortunately did not work for my Mini SE. I don't have any downgrade options. And yes, updated the ini file successfully.

[@InfinityDrones]

Sorry to hear that. If you're on the latest firmwate dji might have locked you out completely. Check out my alternative way to upgrade dji video using dronehacks. You might get lucky there.

[@roar666]

@@InfinityDrones hey, thanks for replying. No, I'm not on the latest, I'm the one before it. But I def followed the instructions to the letter, including experimenting with when to plug the drone in after startup... I'll check out your alternative... I only want to get the damn thing a few metres in the air in my back yard under big gum trees, but... red zone and all that :)

[@InfinityDrones]

@@roar666 eish.. Red zone on the mini se... Don't think there is a way around it... Besides the tin voil mod to prevent gps lock...

[@roar666]

@@InfinityDrones lol, yeah, I'm sorta getting that impression 😁 I heard about the tin foil.... I'll borrow some from one of my neighbours who uses a lot of it for a hat these days 🙄 Thanks very much again for replying 👍

[@roar666]

@@InfinityDrones hey, great tip on the foil, thanks. Worked very well, if only the tree had moved! 🤔🙄🤣

[@henrilebovic5229]

Which MacBooks does this work with? And is this process free? My computer is saying that it can't open the download because it's from an unidentified developer. Any advice?

[@InfinityDrones]

You'll need a Pc and watch my Alternative way to upgrade firmware video using dronehacks. It's free

[@hitnrun66]

can you do this to disable the altitude limit and NFZ on mini 2?

[@InfinityDrones]

Yes you can disable the altitude limits on the mini 2 - BUT you must not have upgrade past .300 firmware - if you have then it is not possible anymore.

[@hitnrun66]

@@InfinityDrones ah i see, i have an iphone and it didn’t really give me a choice lol

[@InfinityDrones]

@@hitnrun66Typical Apple... Sorry man

[@RevJock]

Thank you so much, wish I'd found this video earlier as spent the day pulling my hair out over this problem lol :-) cheers mate!

[@InfinityDrones]

You're very welcome! I've got another video on how you can do it without using DJI Assistant 2 and after you've downlaoded the files, you dont even need an internet connection :)

[@davybloggs1564]

@@InfinityDrones It would have been REALLY helpful if you'd supplied the link for that here.

[@InfinityDrones]

@@davybloggs1564 here it is: kzbin.info/www/bejne/j5XKqoJsZ8R2h6c

[@jerometremb2392]

Does this work on the newer current firmwares? I read that DJI made it so we can't downgrade?

[@InfinityDrones]

Sadly, dji locked the newer firmware out...

[@julienrossi5975]

Hello thank you for your video. So now, basically, event after watching the update video, it's not possible to downgrade the dji firmware for a dji air 2S?

[@InfinityDrones]

It is possible to downgrade the air 2S. As per the video, check the Dronehacks birdmap. There you will see that it is possible.

[@alexwhite3707]

I cannot get to the local disc window at 3:21. any help?

[@InfinityDrones]

DJI has updated the Assistant software. Take a look at my Dronehacks 1.26 video for the new/better way to do this.

[@kunalpawar7165]

Hello...my dji air 2s 5.8 ghz band not showing...i am not able to see 5.8...only 2.4ghz working...can you plz tell me whats exact issue..

[@InfinityDrones]

Don you have Dronehacks installed on your drone?

[@danludvigsen1974]

your video shows dji assistant 2 for mavic supports mavic air 2 (my drone) but when i go download page and select dji assistant 2 for mavic the air 2 is not on list anymore. anyway i tried both v2.0.14 and v2.1.17 and none of these will update my drone and remote. so i guess its over :(

[@InfinityDrones]

Hey man. Try the dji assistant 2 for consumer drones. Dji is moving everything to that program. If that does not work I'll help you using dronehacks

[@spangle37]

Hi.. looks like the only firmware now on the list is the latest one... none of the earlier ones are on the list when I follow the steps and go into the dji assistant... wanted to downgrade from the latest version but no longer available ..

[@InfinityDrones]

You must check out my dronehacks 1.25 video. Onky way possible. Check the birdmap to see if your firmware is downgradable.

[@Jozin24]

Thanks! Gonna try to downgrade Mini 4 Pro with Europe's newest FW 01.00.0400 and RC FW 01.01.0300. The newest FW has got some uncomfortable limitations🤔Cheers! Josef

[@InfinityDrones]

If dji assitant 2 for comsumer drones does not give you the option to downgarde its because the antirollback version was updated :(

[@Jozin24]

@@InfinityDrones I see... what a pitty 🥲 would you have any idea how to get back the altitude limit up to 500m please ?

[@InfinityDrones]

@@Jozin24 the latest firmware and fly app shows me the 500m option

[@Jozin24]

@@InfinityDronesYou are lucky ... there are new Europe´s rules since 01.01.2024 according to altitude limit. 500m works on older FW versions but after the update to newest FW no chance.

[@InfinityDrones]

@@Jozin24 Ah man, that is very unlucky then...

[@raulmejia320]

When I connect my drone to the DJI Assistant app, previous versions do not appear. I have a Mini 3 Pro. T.T i need to downgrade help!

[@InfinityDrones]

You can't downgrade sadly because dji put an antirollback lock in it. You'll need a Dronehacks license that costs 40 euro to hack your drone to be able to. Sorry man.

[@88STUDIOPRODUCTION]

This is work for my mavic mini, but not work for the remote control .. help me please

[@InfinityDrones]

I have another video that shows your the Alternative way to upgrade your dji firmware. You can flash your controller or done using that method.

[@elouandoucet5834]

hi, i encountered a problem when updating my mavic air 2, the drone is off. Since then, the update has not finished, it is blocked at 99%. do you have any idea how to unlock this? the drone can no fly. Thank you

[@InfinityDrones]

Watch my dronehacks 1.26 video. Or my alternative wat to upgrade dji firmware video. This method is now outdated with the new DJI locks they've put in place.

[@Moroder_Drone]

Ayeup! I am doing it alright but it does NOT show previus firmwares for my new DJI Air2 S Could you help? Thanks

[@InfinityDrones]

Hi there. Check my channel for the Alternative way to upgrade dji firmware using dronehacks.

[@dolbyblustar]

Thanks for this mate. I just bought a new Air 2S three weeks ago and it did the auto update. Can I use this to downgrade again then use the Drone Hacks to hack my Air 2S? Thanks

[@InfinityDrones]

If you've upated to newer firmware you wont be able to downgrade anymore... Check wat your current firmware is and let me know.

[@dolbyblustar]

@@InfinityDrones Ok mate, it’s 02.04.2130. If I buy a new DJI FPV, will the hack of no altitude still work? Thanks.

[@InfinityDrones]

@@dolbyblustar yes the hack will still work. Just check the birdmap on the Dronehacks website. I have a whole tutorial video if need help.

[@dolbyblustar]

@@InfinityDrones How about my Air 2S mate? With the 2130 update? Can the hack still work?

[@InfinityDrones]

@@dolbyblustar sorry sir. According the birdmap it won't work sorry man

[@深呼吸飛行]

Hi ! Can mavic mini be downgraded back to firmware 01.00.0600? Thank you

[@InfinityDrones]

Yes it can. As per my video, check out the birdmap and it will tell you what firmware can be downgraded.

[@SkyWalker-wj9bq]

​@@InfinityDrones Do you mean Mavic mini of 01.00.0600 can be downgraded? If so, I love to hear how to downgrade. I want to buy the license if it is possible.

[@InfinityDrones]

@@SkyWalker-wj9bq the mavic mini is not supported by dronehacks... only to enable CE boost mode (10% more range). Sadly you'll need to move up to a more powerful drone to have access to the mods.

[@666Mantios666]

YOu still have the oldest DJI Assistant 2(Consumer Drones Series) from last year ? can you upload ?

[@InfinityDrones]

Why do you want the old one?

[@666Mantios666]

@@InfinityDrones because old one is not cuted same new one.

[@InfinityDrones]

@@666Mantios666 Buy why do you need it? Just install it and use dronehacks.

[@666Mantios666]

@@InfinityDrones i just want compare it with new exe. what is containing and what not . If you dont want share then it ok . Thx

[@InfinityDrones]

@@666Mantios666 I do not have the old file anymore, but I'm sure there is an archive website somewhere where you'll be abl to download it from.

[@edwinderick72]

Hello friend. I downgraded my mavic mini from 0.600 to .0400. I wanted to be able to manipulate the parameters. My mavic wants to update the batteries as well. It sees them as new. Should I alow it to update. Thank you.

[@InfinityDrones]

Yes you can proceed to let them update.

[@edwinderick72]

@@InfinityDrones Thank you so much. I will do that.

[@InfinityDrones]

@@edwinderick72 please let me know if you're sorted

[@edwinderick72]

@@InfinityDrones I haven't managed to update the battery. The update message has disappeared and is replaced with new firmware available. I turned off auto update but can't seem to get rid of the message.

[@InfinityDrones]

@@edwinderick72 you won't be able to get rid of that message... Once dji knows... It knows...

[@kakorasheed5589]

And what about Air 2

[@InfinityDrones]

The Air 2 can be upgraded using dji assistant 2 for mavic. But I recommend using dronehacks kzbin.info/www/bejne/j5XKqoJsZ8R2h6c

[@Naveen_dronphy]

Hello Thank you for the wonderful video but today i updated to 01.04.0000 firmware but i tried downgrading by your method but its not happening. could you please help in downgrade from 01.04.0000 to older firmware. appreciate your response

[@InfinityDrones]

Hi there. You need to watch my latest video. Dronehacks 1.25 will fix your problem. Your firmware has been updated too far. You need a license now...

[@Naveen_dronphy]

Thank you for quick response and I have another question earlier I purchased regular license before upgrading Dji mini 2 to 01.04.0000 and if I follow your method as showed in recent video will it work ? Or should I buy regular license again ? Please clarify thanks in advance

[@OutdoorScenes]

Hello, There is no file "defaultsettings.ini in DJI assistant 2 for Mavic, could you help? Thank You!

[@InfinityDrones]

Dji has updated their software to block it. You can use Dronehacks to update/downgrade your firmware. I have a video on how to use it. Just search for Dronehacks 1.25 or Dronehacks 1.26 :)

[@MICHAL4709]

Not work with dji 2 s I try to find this file in folder and isn't exist, after installing dji assistant, I need help

[@InfinityDrones]

This does not work on the air 2s. You'll need to use dronehacks. Check my channel for tutorials.

[@speed-zv2mc]

Great video brother 💯💪🏾💪🏾

[@InfinityDrones]

Much appreciated, thank you. Take a look at the alternative way to upgrade firmware video I've made. Even beter since it can be done completely offline.

[@BLACKPANTHERFIGHTER]

So .... Does this mean I'd I buy a brand new Mini 2 that I can downgrade the existing firmware to a older one ?

[@InfinityDrones]

You just dont know what firmware it was shipped with. Chances are very good that it would still have firmware on that you can mode, but there is not guarantee

[@JallezJaleel]

Hi, I hope you dont mind answering me . i am trying to download my air2s controller firmware and by using your method to change to the defaultsetting.ini file but now the file is not showing updtade_enabled text. its now showing totally different texts. could this be an updated verison of dji assitance 2 consumer drone

[@InfinityDrones]

Hi there, sadly I think the newer versions of assitant does not allow you to do so. Check out my channel. I have a video "alternative way to upgrade firmware". You can use the Dronehacks tool to do it for free.

[@iparaj]

the firmware list shows only one entry (which is the present version). Is there any other way to roll back?

[@InfinityDrones]

Yes, you can watch my other video: kzbin.info/www/bejne/j5XKqoJsZ8R2h6c

[@gapttransportedepersonalyt5902]

Hello, I need to downgrade my mavic air 2s because with the new update the drone does not connect to the control... I tried the control with another drone and it works fine... I tried your method but the other updates to downgrade do not appear . I appreciate any help.

[@InfinityDrones]

You can watch my other video "Alternative way to upgrade firmware", that video will show you how

[@gapttransportedepersonalyt5902]

@@InfinityDrones Thank you. I will check it.

[@gapttransportedepersonalyt5902]

@@InfinityDrones I already checked it but it will be the solution to my problem since I don't want to spend for a license that won't work for me... I still checked the hack-drone program and take my air 2s but I don't know if it will solve my problem. same thanks.

[@InfinityDrones]

@@gapttransportedepersonalyt5902 if you're on the latest firmware... Then the only way is via a license... Dji has locked it very good and you'll need to full hack to be able to downgrade from the latest firmware

[@gapttransportedepersonalyt5902]

@@InfinityDrones Too bad you have to pay to downgrade... my drone stopped sending a signal to the control, I tried the control with another drone and it works fine but with mine it doesn't but if I leave the control touching the front leg of the drone it takes it but it does I remove the connection is lost and the only thing they tell me is that it may be the update and they recommend a downgrade. Too bad this friend, what happens with something so expensive.

[@elias4364]

It shows me "firmware update" but not the previous versions... i can only see my current one (01.04.0000)

[@InfinityDrones]

Sorry man... 01.04.000 on the mini 2 is completely locked. You can try my other video 'alternative way to upgrade firmware)

[@georgep3261]

Hello! I have dji mini 2 and firmware 1.04 how can I go back to 1.03? I'm looking forward to every answer Thanks

[@InfinityDrones]

Take a look at my Alternative way to downgrade dji firmware using dronehacks video.

[@mentalistsa]

DJI assistant discontinued. Bummer

[@InfinityDrones]

Not a problem. You can watch my "Alternative way to upgrade firmware" video. That's the new and improved way.

[@kungfool69]

nice video but unfortunately it did not solve my problem. I have an display model Air 2s that will not take off, and is giving me "incompatible firmware version: code 30224". The DJI Assistant program detects it, and allows me to downgrade firmware, except the whole process takes too long, and the drone runs out of power at about 50% transmission. Any further ideas??

[@InfinityDrones]

Hi there! Have a look at my Dronehacks 1.26 video. You don't need to buy a licence if you all you need is downgrade the firmware. However, check the Dronehacks birdmap, you might be on a firmware that does not allow you to downgrade. In that case just flash the latest firmware again and see if that fixes your issue.

[@RSPRODUCTION22]

It is showing only current firmware not older version

[@InfinityDrones]

That means you're firmware is too new. DJI has implemented a Anti Rollback feature that prevents you from downgrading. Sorry man.

[@ncrrealestate]

I have bought a new DJI Air 3 Drone. But, your this Video is not updated for my new DJI Air 3 Drone. How to downgrade FIRMWARE for my new DJI Air 3 Drone. Kindly, make a new Video for it.

[@InfinityDrones]

The air 3 was just released. It is not supported yet. Only option as of now is the dji assitant for consumer drones.

[@ncrrealestate]

@@InfinityDrones DJI Air 3 is also a Consumer Drone. Actually , when I open "defaultsettings.ini" file in 'Notepad' ....There , is No Options shown that time , which is showing in your KZbin Video. Kindly, guide me @ this Step only......I am sure "DOWNGRADE" option will show , if you guide me at this Step. Regards

[@InfinityDrones]

@@ncrrealestate this is not compatible with the air 3 sir. This video was released quite some time ago and there has been many new versions op the application. The latest version of the dji assistant 2 for consumer drones have locked out the feature as explained in this video. Downloading an older version would bring thr feature back but then the compatible of your new air 3 would be lost. Only option for you right now is dronehacks and if your antirollback firmware version is too new then you can't downgrade. Worth a shot though, nothing to loose.

[@deltatango3653]

I hope you've finally fixed my problem............ And you're on a Windows machine? Thanks!!!

[@InfinityDrones]

As per the other comment. Try watching my alternative way to update / downgrade video

[@MyHead16]

for me i baught just a used mini 2 which is bound to an account and has latest firmware how can i get to see the old ones to downgrade and is their a possibility for me to get it unbound?

[@InfinityDrones]

you can check my channel for the Dronehacks 1.26 video. It will show you all the steps. But do not update the firmware if at all possible.

[@Roboticdoughbull3k]

​​​@@InfinityDrones Can I also ask you in a similar situation I'm heading into? Briefly I finally decided to get a DJI drone, Long story short I heard about the v 01.04.0000 potential issues some people are having after updating. I went out of my way to buy a used mini2 with firmware v 01.03.0000 that's installed on my mini2. So seller knows I don't want it updated and why, he's I suppose unbound his association to the drone and shipping it to me, so.. my big question.. I've already installed the DJI fly app on my Samsung Galaxy s6 tablet and my LG G8 thinQ device and everything is set up with my registration as far as installing and setting up the app on my devices. I'm waiting for the mini2 to arrive. When it does arrive and I am ready to link everything to get flying, then what process should I use to get flying without risk or potentially being forced to update to the firmware version v01.04.0000 most people are unhappy with and cannot be downgraded or rolled back? Remember I'm a newly registered DJI customer never before affiliated with the use of any DJI products, now registered in the fly app waiting for my mini2 to arrive with the last known good, able to be rolled back v 01.03.0000 firmware. Will I look at the same process and video link you referred to the other gentleman here? or...? I'd really appreciate your help. New subscriber and Have a great day bro.

[@InfinityDrones]

@@Roboticdoughbull3k Thanks for the sub! With regards to your question. If your mini 2 is on the latest 01.04.0000 firmware then you cannot roll back or mod the drone. So it is key that you do not update the drones firmware. If your mini 2 come standard with the latest firmware... then you're out of luck i'm afraid....

[@alexanderximenez9616]

Quick question, will the downgrade firmware help to remove the geo zone lock? I updated my mini 2 and now every time i want to fly it I need to keep asking for permissions to DJI which is becoming very annoy.

[@InfinityDrones]

no it will not... you can remove the nfz (geo zone lock) by using Dronehacks. I've got a full tutorial on how to do it on the Mini 2.

[@ThaTexan]

Do you have to factory reset the actual controller also?

[@InfinityDrones]

No need to do that.

[@deltatango3653]

Well, it didn't work "network error please try again" . With my Smart Controller, Mavic 2 Zoom, and now the Air 2s. I've tried multiple cords, and I can even get in and calibrate the sensors. But when I click on Firmware update, I see nothing but the above error message. This has been going on for 2 years. ...............

[@InfinityDrones]

You can try updating your firmware using dronehacks. Let me know if it works for you. I have videos on how to do it.

[@ramakhil1232]

Broo i have done same as you have told but am not able to download older version app in ios

[@InfinityDrones]

Did you watch my alternative video? Using dronehacks? If dronehacks does not work... You might be on a firmware that does not allow you to downgrade. May I ask what firmware version you're on?

[@henrilebovic5229]

When I plug in my mavic mini more than just the log expert pops up. Simulator and firmware update also appear, but nothing to downgrade. When I follow the rest of the steps to allow this downgrade I later find out that I can't find the correct files. Even the local disc file which first pops up for you is not on mine. Why is this? Did DJI make this downgrade harder to do now? Maybe this is beyond my reach, but I really want to figure this out so I can make the changes to my drone. Do you know what I am doing wrong?

[@henrilebovic5229]

Can't get to defualt settings

[@InfinityDrones]

Dji has locked that out. You cm's watch my Alternative way to upgrade firmware video using dronehacks. It's free, so don't worry.

[@dennispioch1934]

Hello, the firmware downgrade is not free with Drone Hacks for the DJI Air 2s. Is there another alternative to this?

[@XdekHckr]

I have no downgrade option for my dji air 3

[@InfinityDrones]

That's because the air is not supported... Did you check the Dronehacks website?

[@hackair643]

hello and congratulations for your video, I have a brand new air 2s with firmware version 02.04.2150. I'm thinking of hacking it but I'm not sure yet.. but before that I'd like to check the drone board by doing an upgrade.. I connected the drone to the assistant but it only allows me to upgrade to the latest version which basically locks the possibility for hacking.. ..so is there any way to be able to upgrade to a version before the last one for example on 02.04.2190 ??? i m very confused..

[@InfinityDrones]

Hi there. Dji has locked out the option... But you can upgrade to any version you want using dronehacks. Just stay away from the latest firmware version. Watch my dronehacks 1.26 video - it's a complete step by step guide

[@hackair643]

@@InfinityDrones yes but in order to use drone hack for upgrade or downgrade I must bought it first? Right?

[@InfinityDrones]

@@hackair643 no need. Firmware updating is a free service

[@hackair643]

​@@InfinityDronesI'm very happy for that, I didn't know, thank you very much! however if I do the upgrade on the drone via the DH app what happens to the controller? will it stay in the old version or does it not matter.. to have an older version?

[@InfinityDrones]

@@hackair643 it does not matter. The controller can be updated via assistant if you want. It will not affect the mods/hacks

[@freeflightfilms7403]

How do I do this for Mac please? Any advise appreciated

[@InfinityDrones]

Sorry man, only advice I can give you is to install Windows on it (as a virtual machine) - I've never worked with iOS sorry... but there is a much simpler way. Watch my dronehacks videos (especially dronehacks 1.27) for tutorials on how to it. Dronehacks makes it so much easier... but you need Linux or Windows.

[@yogeshtekale6238]

Hi sir, Sorry to disturb you but you are the only youtuber who taking about DJI action 2 downgrade, The issue is last week i updated DJI action 2 but after update screen getting inverted, everything is going reverse, I am not able to use it and the video recording not working, So please help me , I wanted to downgrade DJI action 2 so please send me the required file Thank you so much

[@InfinityDrones]

Hi there, sorry to hear! Sadly the I've not used any of their action camera's... I do not have their firmware...

[@lumieregluttony1442]

Hello,Im having trouble updating my firmware. And I cant seem to find the DIJEngine folder. I cannot fly my drone and I just bought it. Hopefully somene can help me

[@InfinityDrones]

Use this method kzbin.info/www/bejne/j5XKqoJsZ8R2h6c It's way better.

[@lumieregluttony1442]

@@InfinityDrones aight,I’ll check it out later. Thankyou sir!

[@InfinityDrones]

@@lumieregluttony1442 let me know if you need any help.

[@cabomful]

Plz tell how to downgrade DJI mini 2 from FW 01.07.0200 to a lower FW ?? Plz

[@InfinityDrones]

The only way right now is to sell your mini and buy / trade for one with a lower firmware. Sorry man...

[@ozkar_fpv]

Hello Infinity drones, i still can't downgrade my air2S's firmware after changing the default setting.. There's no older firmware appearing in my DJI Assistant.. Do you know why? Please help i want to FCC Boost via drone hack.. Thank you

[@InfinityDrones]

If you've updated to the latest firmware... then DJI has locked you out... If you havnt updated your firmware to the latest version, you might still have a chance. Watch my turorial here: kzbin.info/www/bejne/j5XKqoJsZ8R2h6c

[@Perros1245]

i can only see the refresh option

[@InfinityDrones]

Go check out my Alternative way to upgrade dji firmware video. The dronehacks application is so easy to use.

[@Thomas349]

my dji assistant is not working, i need the v2.1.5 for test, mine drone Mini 2 is shining all lights without stop, help me please :(

[@InfinityDrones]

Hi there. Watch my latest video, super easy to upgrade or downgrade using Dronehacks. Way easier.

[@Thomas349]

@@InfinityDrones So, I managed to access the drone and managed to downgrade the firmware but even doing the downgrade the drone continues to present the same problem, it is giving several calibration errors including the gimball, gps and UMI, however it connects normally with the control and with the cell phone but it keeps flashing all the lights of all colors and it doesn't stop (I'm using the translator because I'm from Brazil, I hope you understand)

[@InfinityDrones]

@@Thomas349 sorry to say this, but it sounds to me like your drone had a hardware issue...was the drone in a crash?

[@Thomas349]

@@InfinityDrones yes, he is on mid air and lost signal then hit the ground

[@InfinityDrones]

@@Thomas349 I think you have a hardware issue

[@nasifnoor7113]

Downgrade is not available now. I have trying this now. But can not do this.

[@InfinityDrones]

Then your firmware is too far updates. What drone are you using?

[@upaxah]

Thank you very much! You helped me out!

[@InfinityDrones]

Glad to hear that!

[@fluidmind3629]

how to do this to dji mavic air 1

[@InfinityDrones]

You can use my Alternative Way to Downgrade DJI firmware video to do it.

[@bradbillings8836]

Does this work on just a normal air 2?

[@InfinityDrones]

The dji assitant got updated and this no longer works with all drones. Check out my Dronehacks 1.26 video for the new way which is also free. You only need to pay if you want to remove the nfz and altitude limits

[@srministro]

Thanks! very nice explanation

[@InfinityDrones]

Thank you very much!

[@suriyanarayananrsrinivasan7986]

This method didnt worked for MAVIC MINI SE .. showing only current frimware no option coming to downgrade earlier version ( using 01.02.0000) wanna go back to 01.01.0000 ... Any one know's a way please let me know

[@InfinityDrones]

You can watch my other video. The alternative way to upgrade/downgrade. Here is the link: kzbin.info/www/bejne/j5XKqoJsZ8R2h6c

[@dennispioch1934]

Hello, the firmware downgrade is not free with Drone Hacks for the DJI Air 2s. Is there another alternative to this?

[@InfinityDrones]

That's because you have a higher or lower antirollback version. It's only 1 pound. Check out my latest video. The st steps are there. Super easy.

[@dennispioch1934]

@@InfinityDrones Can you send me the link to it? Unfortunately I can't find him.

[@InfinityDrones]

@@dennispioch1934 here it is : kzbin.info/www/bejne/eKq7nI19pLuKna8

[@sherwinoira]

i have a problem with my mini 2, signal is lost or weak even if it is just 10meters away.. firmware downgrade may solve it

[@InfinityDrones]

Where are you trying to fly? City? Are you close to a wifi repeater, cell tower or power lines?

[@sherwinoira]

even in mountain areas...5.8 doesnt work@@InfinityDrones

[@FukkUallable]

Same issue with the air2s for a couple of days now. Updated it recently so I guess that’s the issue !

[@InfinityDrones]

@@FukkUallable all of these 5g cell towers going up is a nightmare

[@JustAnOldMan]

Thank You

[@InfinityDrones]

Just a pleasure man!

[@stefanwilkens]

Unfortunately, it seems that the just released v01.04.0000 firmware update for the Mini 2 has removed the option to downgrade the firmware. DJI assistant no longer shows previous firmware versions and doesn't offer the option to downgrade the firmware.

[@InfinityDrones]

Have you tried downgrading via dronehacks app? I have a video on how to do it.

[@drabdullahisanniozomatasup8818]

@@InfinityDrones kindly help with the video, i really need this for my smart remote controller, thanks!

[@InfinityDrones]

@@drabdullahisanniozomatasup8818 What issue are you experiencing? Check out my video here: kzbin.info/www/bejne/j5XKqoJsZ8R2h6c

[@weezie40cal]

Does this work for down grading from 1.5 on the mini 2

[@InfinityDrones]

No it does not... the mini 2 is completely locked from 1.4 onwards...

[@roberth2747]

Unable to take off (code 30064) after firmware update! I did exactly what you shown in the video, but it won't give me the downgrade option only current and refresh. Any suggestion???

[@InfinityDrones]

Yes. Try and watch my alternative way to upgrade dji firmware video. You can use the Dronehacks application. Let me know if you need help.

[@roberth2747]

@@InfinityDrones Intresting, I decided to take the SD card out before I turn the drone on again and this time let me take off. I turned it off and put SD card back in and turn it on and still works except won't fly side to side a less I switch remote to cine then works in all direction. I guess now it's a settings issue. Not sure if the SD caused the drone unable to take off or just had to sleep overnight for self healing or DJI technical support did something remotely after I called them. Anyway now works again ☝

[@InfinityDrones]

@@roberth2747 Have you calibrated the obstacle avoidance sensors? Also did you set the obstacle avoidance to bypass or brake?

[@roberth2747]

@@InfinityDrones I always keep it on bypass, but all the errors I had from the day before it's all gone for some reason?! Now it's good again,

[@InfinityDrones]

@@roberth2747 Bypass prevents the drone from flying sideways.

[@thefaithfullservantemmanue8227]

will this work for air 2

[@InfinityDrones]

The DJI Mavic Air 2 uses the older DJI Assitant 2 for Mavic - You'll be able to downgrade using that. BUT I recommend using the dronehacks tool to downgrade/upgrade your firmware as it allows you to do it offline - so no worries about a bad internet connection spoiling your fun. I have a video on how to do it: kzbin.info/www/bejne/j5XKqoJsZ8R2h6c

[@sky4kino943]

Great explanation. Thank you!!!

[@InfinityDrones]

Glad it was helpful!

[@tomeknedza1898]

Will it work with my Air2?

[@InfinityDrones]

Yes it does work on the air 2. I used the Air 2 in this video.

[@freeman-1776]

I accidently used a UK update and now my Air 2 is limited to 500 m. I'm so going to downgrade tomorrow to see if I can get that shit out of my drone. I don't even live in the UK.

[@InfinityDrones]

if you're on the latest update then you cannot downgrade... Check my Dronehacks 1.26 video for a full tutorial

[@ALANMELORANGEL]

Thank´s you help me to solve my trouble!!!! Congrats to you.

[@InfinityDrones]

Glad I could help!

[@youfredvlog6772]

thank you for helping me #infinitydrones my mini2 drone problem...

[@InfinityDrones]

Fantastic news!

[@davidhudson3733]

Unfortunately this does not work anymore. 😢 I'm forced to send my drone in for warranty due to a firmware download issue. Definitely not happy with dji.

[@InfinityDrones]

What drone do you have? Of the air 2 series then watch my dronehacks 1.31 video!

[@davidhudson3733]

@@InfinityDrones mini2 I will try to find the video.

[@InfinityDrones]

@@davidhudson3733 DJI locked the mini 2 completely... no mods available for you if you've updated too far... really sorry man.

[@InfinityDrones]

@@davidhudson3733 01.03.0000 is the firmware you need to be on.

[@sakthikumarperiyasamy2403]

I am in V06.0000 can update only till v01.0000 using the software not to v03. Any other way / suggestions

[@InfinityDrones]

this method is outdated. Check my Alternative way to upgrade dji firmware video. Dronehacks makes it soooo much easier.

[@carlosamador7502]

Hi!!!PLEASE HELP! have the air 2s with the 02.04.2130 Firmware!! it is possible to make a Downgrade of my firmware?

[@InfinityDrones]

Sorry man... It's not possible... Only option is to try and swap out with someone else...

[@RODPIKERDRONESUK]

Great job thanks for sharing cheers

[@InfinityDrones]

Thank you for the support! Keep growing your channels too!

[@divyaprakashdixit]

Is it possible to downgrade from 1.05?

[@InfinityDrones]

Sadly it is not...

[@divyaprakashdixit]

@@InfinityDrones any other way?

[@InfinityDrones]

@@divyaprakashdixit that firmware is locked... Inky way would be to sell and buy another non upgraded unit or find someone willing to swap.

[@christospapanagiotou2003]

Hello sir....thank you for one more amazing video... I need your help i stupidly updated to 01.01.01.01.0700 is there anything i can do to downgrade? I am looking to have the fcc hack Thank you in advance

[@christospapanagiotou2003]

Mavic air 2 drone

[@InfinityDrones]

Really sorry to tell you... There is nothing you can do... Sorry man... Downgrade is not possible...

[@kodean]

just got mine in the mail today and i’ve been up all night trying to flash the firmware but it gets stuck on 100% every time, the firmware on the device is 01.03.0009 and I never connected it to my phone to update it so did DJI send me a device with bricked firmware?

[@InfinityDrones]

You can try this method. Let me know if this solves your problem: kzbin.info/www/bejne/j5XKqoJsZ8R2h6c Please! DO NOT update to the latest firmware before watching my video: kzbin.info/www/bejne/o4nFfJR7n76irJI DJI is trying to lock everything out.

[@kodean]

@@InfinityDrones it still isn’t working and the flashing is taking way longer than 5 mins, maybe 30 mins to an hour

[@InfinityDrones]

@@kodean let me get this right... your drone is not on official firmware... you cannot upgrade it via dji's own assistant app and you cannot update using the 3rd party tool like Dronehacks? Does your drone work fine? Can you fly it without any errors?

[@kodean]

@@InfinityDrones so i followed all your videos even the one where you set the drone up brand new out of the box and i did exactly that but when i open dji assistant it doesn’t recognize the drone even if it’s on and fully charged. the drone hacks application recognizes my device and i’m able to start flashing firmware but when it gets done with a few modules it just starts going by .1% super slow and stops at module progress 100 then i’m forced to restart the application and plug the drone back in and when i do it says my firmware is still on 01.03.0009. i haven’t set it up through my phone yet bc i don’t want it to try and auto update so i’ve never flown or used the actual fly app with the drone. just took it out the box charged it up and plugged into my pc

[@InfinityDrones]

Wow, thanks for all the info... Mini 2 with your firmware version is actually unheard of... I'll try and get hold of the Dronehacks devs and see whats up. Is it possible to make a video of the whole process and either paste the link here or pop me a message on instagram so that I can forward it to the devs?

[@andremolina1039]

hello, i was upgrading my drone AIR 2S and the installation was interrupted, and now i cant fly, it shows an error (battery intallation error 30068). what should i do? i will aprecciate your answer!

[@InfinityDrones]

Check my other video. Alternative way to update firmware using drone hacks. Then you flash the firmware manually.

[@davybloggs1564]

@@InfinityDrones PLEASE supply the links when you say 'I have another video'! It's easy for you and helps us, rather than trawling through your many helpful vids.

[@InfinityDrones]

@@davybloggs1564 sorry man. Here it is: kzbin.info/www/bejne/j5XKqoJsZ8R2h6c

[@RkStudiosFilms]

Really very nice..

[@InfinityDrones]

Thank you very much. Hope this helps someone.