Dji mini 3 pro Obstacle Avoidance not working / mini 3 pro sensor calibration / Fix

[@dennisq2006]

I encountered the same problem and found a solution that worked for me. I took off the Mini 3 Pro in sport mode to deliberately disable the vision sensors, then switched back to normal mode, which restored the sensors to normal functioning.

[@beleeez8078]

Same thing I did, switch to S, switch off control and drone. Switch on again and change to N. Problem solved.

[@snazzyd8866]

@@beleeez8078 OMG.....I was shocked to see my Mini 3 Pro crash into the wall of my house and I'm now getting the same Sensor error. My brother was playing around with the controller and might have left it on S/Sport mode. Damnit...it better not be borked.

[@rickmiller4110]

I found this "over-my-head" high-tech solution and saw your solution and Hallalula , it worked for me! Thank you Dennis Q.

[@cesartelles5576]

I'm so thankful for this tutorial! I just got my new mini 3 pro and crashed in the first flight because the sensor was not working. Now that I managed to calibrate the sensors as you explained it works perfectly.

[@everythingcracked]

Glad i could help

[@arnoldking2658]

This literally happened to me last night. Crashed my drone because the sensor is not working at all. Gonna try this solution 🙏🏾

[@anoodhatem9185]

Can you give me the web address pleas because I have a same problem Thanks

[@Cassius..]

Can you fix the sensors without a computer, if you had an iPad or iPhone

[@Michail7]

My dji3 pro can flight sideways even i have disabled it!!! Will that fix the issue????? Thank you

[@louislozano9669]

The only help I could find with this problem

[@Cassius..]

I use a little fan that I put in front of the drone when installing firmware or anything that takes time to do on the drone. It really helps. Just a little fan that charges via USB that I place in front of it

[@everythingcracked]

Works

[@PeterMoore-h2i]

Hi Guys , I had the same issue and drone getting really hot and dropping out while I was trying to calibrate . I changed the cable to another one and had no issue with drone heating up . What I suspect is obviously the drone pulls more power than a standard mobile phone ( galaxy charging cable ) so you need to use a quality cable , once I did that it calibrated no problem.

[@onthe9s857]

Good video, I had problem with ambient lighting low, hopefully this fixes it

[@RajaCrypto-rd5ph]

Hi sir thanks for your sharing I have same issue that the obstacle sensor is not work. I have tried this callibration, but on obstacle test this is still not work. I have tried with brake and bypass mode and tune for gain this brake but this still not work

[@costapi1672]

Thank you your video is the only one I found.

[@everythingcracked]

Glad I could help

[@beezymarketing]

Thank You very much my friend! I think this problem has a solution now 👍

[@ehdjulianguinto8519]

Thank you my friend! It helped me a lot!

[@angb2]

Another thing, at night when the sensors are not working the drone flies sideways. Not in the morning and in the afternoon, because I disabled it. Is there any relationship between the sensors and lateral flight? I did the procedure in your video. Congratulations, I'll test it in the morning here in Brazil. sorry for my English. Help me please.

[@everythingcracked]

I will do some research and let you know if anybody else is facing this issue

[@Mmikeyboy1]

Thanks so very much for the advice ❤

[@peterevans6086]

Very interesting. Thanks 🙂

[@jay-24]

My drone is not connecting with PC although I already installed software

[@imirshad4u]

Make sure you switch your drone on

[@barneybiggles]

Use a small ice cube bag half filled or a damp cloth that’s been in the freezer and wrap it around the body.

[@everythingcracked]

Hot it near you air conditioner

[@sergiocardoso-rn3vj]

goodnight friend. Is there a way to send me a link to the page that you open to start the calibration?

[@explorewithJ6098]

Thanks man.. whenever I do tracking it say obstacles disabled … any how to enable the sensors?

[@everythingcracked]

Sensors are disabled in low light or at night

[@Felipe870222]

Hey thanks for the video. I’m trying to use the software but it suddenly disconnected the drone and I can’t finish the process. Any idea?

[@everythingcracked]

Try cooling the drone. It shuts down due to overheating

[@JanKlufo]

Thanks, man! I'll try.

[@Syam8876]

Gimbal stuck problem issues ?

[@remin5395]

Hey there my Mac detects the drone but the software doesn’t what can I do?

[@Cassius..]

keep trying i had to try installig it 3\4 times on my mac

[@tosinolashore8669]

Hello, question what size is your MacBook because i’m hearing you need a 14 in or greater to perform the calibration but I own a 13 in

[@everythingcracked]

Its 13 inch

[@tosinolashore8669]

@@everythingcracked that’s odd, I don’t know why my calibrate now button is greyed out

[@everythingcracked]

Check drivers

[@Cassius..]

mines is 13 inch mac ihad to try it a fe times yeah as said make sure you get the driver

[@mountain-biker]

Hi, i don"t see the calibration menu in the Dji assistant 2; any idea ?

[@danielcostales2042]

check if what you're using is the right dji assistant 2, had the same problem found out that i have to use the "Consumer Drones Series" software

[@tiou1405]

HELLO THE TWO SCREEN WHERE YOU THE SENSOR APPEARS TO BE BLACK PLEASE ADVISE

[@yctruth]

I can't get the software to install on my Mac smh. I'm definitely having an issue with my sensors.

[@itgw4658]

Its scary because it doesnt provide a warning. You have to figure it out yourself. Thankfully i noticed before i did anything stupid!

[@RamblinManMoto]

I can't get through the rear calibration. Has shut down repeatedly as too hot I guess.

[@everythingcracked]

You need to cool it down with a portable fane or turn you ac to coolest mode

[@badmad6817]

​@@everythingcrackedWhat is the maximum battery temperature for the mini 3 pro?

[@albertocreator]

I’m having this issue. After taking off drone starts moving right sideways by its own, why is that happening ? Then when I try to land, drone does not detecta ma the floor or neither my hand

[@everythingcracked]

Try calibrating the sensors

[@angb2]

I crashed my mini 3 pro and front and back sensors are not working. It happened at night. In the morning and in the afternoon they returned to work. Is the functioning of the sensors related to the brightness?

[@everythingcracked]

Yes. Sensors dont work at night.

[@BataSug_POV]

​@@everythingcracked i almost crashed to myself just now!!

[@AtulSingh-xj6py]

​@@BataSug_POVi crashed my dji mini 4 pro just hour ago .with my self

[@iluvass2]

Brother konsa vala software hai?? Dji assistant for mavic?? And Mera pc N laptop se connect he nhi hoorha .... Having same issue 🥲😭 ...

[@everythingcracked]

DJI assistant 2

[@iluvass2]

@@everythingcracked thanks 👍 done the calibration.... Now i will take the test flight finger crossed 🤞

[@everythingcracked]

Glad to know this video helped 😍🥰

[@iluvass2]

@@everythingcracked yass video helped💯💯... But after calibration... Still front n backward sensor not working... Tomorrow i will do calibration again 🥲

[@everythingcracked]

Try the sensors in day time. They don’t work at night

[@VisionsVideoPro]

Did anyone experience a black screen issue?

[@i.zainul72]

Hi bro plz contact me my drone crashed and camera movements not working how to fix it

[@azeehindistorykahaniyan1474]

Haa Bhai Mere Drone Dji mini 3 Pro Me Sensor Error Aa raha hai Software ka link 🔗 Do Na Bro Plz

[@adamemilian9087]

Hei, you didn't do the calibration correctly. Keep the drone in the middle of the screen all the time.

[@firsst6779]

I did it many times but not work.

[@farmintexas]

My drone doesn't pop up when I plug in into the software

[@ahmadsaab3235]

Turn on the drone before pluging in

[@RamblinManMoto]

I don't think you're supposed to physically move the drone around like you are doing. You are supposed to point it. Isn't that what the tutorial shows as the "wrong" way to do it by physically moving the drone around?

[@everythingcracked]

It wont capture the full screen

[@matijanovakovic7221]

Thank you bro

[@marshalle.s.m.5578]

The tutorial looked helpfull. However, the software did nothing more than let me access the SD card.

[@marshalle.s.m.5578]

It took over an hour of trying to do it before or overheated. Every time when on the damn bottom sensors it shut down from overheat or the usb moved. I cooled out on the freezer and also used a can of compressed air to cool the drone during calibration. Unfortunately, After all of that, the sensors are STILL DISSABLED. Thanks for making the video though. Im sure it helped some.

[@sandzeis]

My computer cant find mavic mini 3 pro i used 3 computers and none cant find.

[@everythingcracked]

Are you using DJI assistant 2 ?

[@Encryptedz]

I can’t find it either and I’m using DJI assistant 2

[@edwinandressogamosojunca2811]

good job

[@vamsibandi8300]

what exactly is your mini 3 problem ? sensors didn't work at all ? foward, backward sensors ? and did this calibration solve it ?

[@everythingcracked]

Sensors stopped working and started working after calibration

[@lordbmills]

Thanks bro

[@gandharavkhimta]

Bro my mini 3 pro is rotating on the ground when i turn on from joysticks, rest its flying good but when its on the ground its rotating 360degrees, can u please help ?

[@everythingcracked]

Check propellers if they are installed correctly