DJI Neo aftermarket propeller | Gemfan D51-5 Propeller | Does it sound different?

[@vernelfpv]

Gemfan D51-5: s.shopee.ph/5Aag5XeIKn

[@Bacardibombillo]

Dude thats a spam page. You have to log in and what not..👎

[@merliner46]

The sound of propellers depends to a large extent on the shape of the tip of the propeller. A sharpened propeller tip results in a lower sound. In order to keep the buoyancy the same, the propeller surface must be increased further away from the tip of the propeller, or a propeller with a pointed end with several wings must be used.

[@TheLifeofRon]

Thank you Kuya! I will be using these for my Neo.

[@vernelfpv]

yeah I will be using it as well

[@DronePH-2024]

GREAT TEST BROTHER THANKS❤❤❤

[@vernelfpv]

thank you brother

[@mestresplinter89]

Acha melhor com elas ? Do que a originais ?

[@vernelfpv]

I prefer them than stock. But it’s just me

[@StrillLife]

I tried to put on those same exact props on mine and stopped because the screws were so short. I ordered some M1.2x 4 bolts from Amazon that I'm waiting on. Hopefully, they work. I didn't think to do what you did to accommodate the shorter screws. It's definitely less annoying with the after-market props.

[@ianputra8581]

It's still too short, should use M1.2 x 6 bolts

[@StrillLife]

@@ianputra8581 dang now you tell me. 🤣 Hope I can return the set when I get it. Where did you get your M1.2x6 screws from?

[@ianputra8581]

@@StrillLife I don't know, I bought it from a local seller in my country

[@StrillLife]

@@ianputra8581 thanks for the reply. I think I found the correct ones on Amazon

[@junweili293]

@@StrillLife is any of the bolts work?

[@WhattaFook]

I use the 4 blade. Better, than original. I also have this 5 blade what you have and 6 blade hqprop 51mmx6.

[@vernelfpv]

my 4 blade is still not arriving soon. still stuck in vietnam

[@WhattaFook]

@@vernelfpv i hope you get them soon. I'm western european, got them within a few fays. I use gemfans on my other drone too. Good propellers.

[@RCsbyRich]

Do you see any difference in 4,5 or 6 blade ? Sound, thrust, flight time etc?

[@WhattaFook]

@@RCsbyRich I'm testing the 4 blade. The others just prepared, not yet installed. The 4ers are a little quieter and have deeper pitch. Very similar everything, probably a little slower. 1-1.5 km/h. But looks much better, the 4ers are light blue, the 5ers are yellow and rhe 6ers tinted transparent.

[@RCsbyRich]

@@WhattaFook will you put any videos up of these in test. Thanks

[@airbnbphotography]

are those better quality ? My brand new DJI propellers one broke off mid flight and crashed the drone :(

[@vernelfpv]

gemfan is a good brand of propeller for FPV Drones. I have been using for a couple of years already together with HQProps.

[@anchit8211]

good vlog boss, very helpful

[@vernelfpv]

Glad it was helpful!

[@RCsbyRich]

Are the Gemfan generic blade orientation so the can be used for either corner 🤔

[@vernelfpv]

just follow the orientation of the stock props and whatever you put on the upper left will be the same on lower right meanwhile the upper right will be the same on the lower left.

[@RCsbyRich]

@vernelfpv yes but are each prop able to use inner and outer by just flipping them over

[@vernelfpv]

@@RCsbyRich nope. you need a clockwise and counterclockwise pairs of props. if you just flip it over, it will change direction and pitch for the inverted props. it will not fly correctly.

[@RCsbyRich]

@vernelfpv yes I see know. I just took them out of the packet and there are a set they have a hexagon on the top and circle shape on the bottom of the centres.

[@vernelfpv]

@@RCsbyRich you probably got 8pcs of props. what I try to do is look at one of the blades in the props. there should be D51-5R and D51-5 embossed on it. in my case, if the Neo's camera is facing up, the D51-5R should be on the top left and bottom right motor. the D51-5 is in the top right and bottom left motor.

[@jollyfitzdread]

Do the motors get hot after a full battery flight?

[@vernelfpv]

it gets a bit warm with the 5 Blades. I will also test when the 4 Blades arrive

[@airbnbphotography]

how good of a quality is that brand ?

[@vernelfpv]

It is a good propeller brand for fpv drone

[@aumarigan]

1:56 Yeah it's not as loud as the stock propellers. Any truth to the info that the motors will get burnt when using these aftermarket props?

[@vernelfpv]

I'm not yet sure as I haven't experienced a burnt motor. I will further test when the 4-Blades arrive although it gets a bit warm with the 5 Blades.

[@mssippijim]

If 5 blades are quieter than 3, then wouldn't 4 be quieter than 3 but louder than 5?

[@vernelfpv]

actually there are a lot of factors that will affect the sound like pitch. sometimes the props will not necessarily make the sound quieter, but rather it will lower down the pitch which is tolerable for us humans. I think you should check this video kzbin.info/www/bejne/mV7Jf3aYZ7-Lo7s

[@TheSilverFoxDoesStuff]

Can you fit the props to the chicken in the background ?

[@Cartmenez77]

😂

[@vernelfpv]

hahaha. that is my background music

[@Sterreeler]

@@vernelfpv

[@therealdonsteal]

Great video good to know how much of a difference in your upgrade. Keep the videos coming. Where can I purchase the props from

[@TheSilverFoxDoesStuff]

@@vernelfpv I'd be looking for it, with an elastic band to shut it up lol

[@cherexverastiguevlog]

Idol d kaya mas Lalo bumagal ang lipad pa 5 na yong propeller ng neo

[@vernelfpv]

Mas mataas ang drag pero mas maganda handling.

[@Dronevooreal]

Link não está disponível

[@OrangeEMedia01]

51mm ba ang size ng Gemfan D-51, bro? 🤔

[@vernelfpv]

yup 51mm or 2 inches

[@Dronevooreal]

Essa é de 1.5mm 3 furos 2 polegadas

[@vernelfpv]

yup it is 1.5mm hole

[@adfansepri6532]

pake baut apa bang

[@ianputra8581]

@@adfansepri6532 baut M1.2 x 6 bro

[@vernelfpv]

I used stock

[@maqbulmaqbul4086]

or u can buy M1.2x6mm screws

[@vernelfpv]

You beat me to it hahaha. I forgot to mention in the video. But it would wobble a bit so you need to secure the screw tightly

[@wrsxq2yra396]

He just make DJI Neo gay

[@vernelfpv]

yup. it is happy now