DJI Phantom3 Standard Gimbal repair

How to repair a broken Yaw arm on a Phantom 3 Standard from start to Finish.
For Parts Shown in this video www.irepairmd.com
To place a repair order: www.digitallifex.com

[@MrElvin1963]

Thank you! This video was very informative and helpful. Unfortunately nothing worked on mine after I repaired it.

[@victorhurtarte7563]

I did follow your instructions an my P3S now is back to fly!! Thank You very much!

[@lhofweber]

Great video all the way until 24:47... the video skips over a very crucial part, the hardest part of wrapping the flex cable around the camera...

[@jerrydrake8179]

Broke My yaw arm and ribbon . Replaced step by step from this video . Camera works as should . But I motors are not working . Camera only sits still . Any advice would be appreciated .

[@takacsi]

Life saver! Thank you!

[@droneaddict9649]

where can i get the ya motor? the ribbon broke on it.

[@TheChameleon2008]

Hi, Im trying to repair my dji 3 standard also but i have a problem with the flat grey cable that goes from the drone to the gimbal. The plastic connector where the cable hooks in has come of the gimbal so im trying to find a replacement but does anyone know how that piece is called or maybe has a part number?

[@JethBacsain]

I am having issue with my phantom standard, it said gimbal motor overload. But all is align. Can you help me what is the problem. Your help is so much appreciated.

[@CaptainPhoton64]

what does the black and grey wifi wires do for the gimbal...would it affect the telemtry on the app if not seated correctly

[@MAHESHSTUDIOCREATION]

Need this cable for my P3S

[@EnzAirsoftBY]

Hello, thanks for the great video. I replaced the cable exactly like showed in the video but the gimbal does not work and the app shows some infos that the roll an tilt axis has an error. Can anybody help me?

[@jeremysmith9694]

hey i appreciate the video. one problem. I followed everything you said. I recplaced a ribbon cable on a phantom 3 standard. I got everything hooked up. I turned the power on and there is video feed but the gimbal is limp. It doesn't move at all on start up or anytime. There is video feed though. Any thoughts anyone? Thank you.

[@jothabastos]

Thanks!! Great job!!

[@OLCtv]

how did you know the camera would still work, I don't want to buy the parts and the camera isn't working?!!!!

[@alvinkevinalfonso4326]

after the crash every thing is okay? i mean movement gps hold or something,, i crash my phantom 3 standard .. shell is broken and the gimbal holder ,, im afraid if the rotor is broken to :(

[@tonzray]

how many drop pins should be used 2,3,or 4

[@robbarats5090]

Can you please help me with roll arm bracket replacement? I crashed my p3s and snapped the metal ring on the gimbal roll arm bracket.

[@1508lukaz]

have been watching your videos andcthey were very helpful, i just want to ask about my p3s. it is slightly tilted to the left. what could be the possible problem? i tried gimbal and IMU calibration, still nothing nothing happened. hope you could help me on this. thanks. :)

[@brianosborne7157]

where do i get a replacment fan for top of gimble?camr?

[@gerbenposthumus8878]

How can i order that gimbal gard (the link please) and can i pay with PayPal ?.Greetings from Gerben.

[@ernestobranca]

were i find the plastic guard for the gimbal?

[@tannerscherer2877]

Where did you end up finding one? Mine is totally cracked.

[@benbrignol803]

Any link to where I can get the motor?

[@2012cervantes]

Aliexpress

[@CWBDRONE]

Hello ! I have a Phantom 3 Standard and Gimbal this problems it is turning to all sides without stopping. Warm engines really do not know what can be. You could give me a hint to solve this problem? Thank you for your attention. I am sending you the video with gimbal working better or not working ! drive.google.com/file/d/0B7gHx51LL5DsMFVXRTZtUnNVd2c/view

[@BobsPetStopVideos]

I;m back, you did a great job helping me last time, I may need to send my Phantom 3 standard to you. motors won't start manually and after using auto start, it was flying completely bizzare, up was down front was back and very fast irregular fast movement. Bob

[@Asad.Mackie]

Man I just don't know how to loop the ribbon cable around the camera shaft at the end it just keeps getting twisted and caught

[@littlepigization]

Can you tell me where you got the electric screwdriver? I have looked around and can't find one.

[@x8vc94c2de]

H my friend, i make the replace of cable flat, is ok, but only image dont have, only black, but others information is ok, do you help me?

[@jeeplibertyinstall10]

thanks this helped a lot although my camera to my gimbal is not vertically stable as well as the motor is very hot. can you help plz? thanks

[@claragurley4329]

N

[@alainsabum]

you my friend, deserve my subscription. I replaced my flex cable watching this video although my camera is not horizontally stable. could you make a video on adjusting the camera?

[@LukeMaximoBell1]

You'll probably need to realign the motor shaft

[@feelingrandomgames6642]

what size are the screws for the camera back plate?

[@stevenfiler1590]

I have a Phantom 3 Advanced. I have replaced the Yaw arm, the roll arm and the flex cable. When I started the drone the camera is rocking all over the place. What have I done wrong???

[@RobbieDickinson]

I just fixed mine and have the exact same problem. Did you find a solution?

[@MrTB68]

great video.. while watching you, I was able to successfully repair my flex ribbon cable. thanks!!

[@tommasobonetti6593]

HI. Thanks for the video. I followed u to replace the arm for the same reason :). But... I had to replace the roll arm and motor too. Arm and motor bought joined.. But now, the drone camera looks like crazy. Do u know why and how to fix this behavior? I've tried by IMU one time, but nothing.. and then the drone started also to lose the connection with the app, it works for few seconds. Now I can't try again IMU or other calibrations... What's happened? O.o I hope u can help me.. Thanks.

[@PolecatCreekGarage]

The damage looks EXACTLY LIKE MINE. I also bought the same parts too!!!!

[@xonsightx]

I own a small repair shop and service some drones, mostly racing and freestyle quads. So when this job came into my shop I looked at a few different videos to see how it goes back together considering my customer brought it to me all the way tore down and screws in bags lol. Thanks to your video I was able to piece ti back together. The other videos here on KZbin where not as good as yours. Thanks man!!

[@moto35]

I do step by step but i had overload message can you tell me if i can send to you to repair. Where are you located thanks

[@BillyBanana75]

thanks for the vid, I had almost the same damage. I reassembled it all with the new parts and ribbon but I have no motion from the camera and no picture. Any ideas? The little red light blinks that is on the side of the logic board and what seems to be a green light on inside the camera itself but that is it.

[@edgarsan4976]

Todo se ve bien hasta que la mano se sale del vídeo y no se observa nada mas que tu reloj y no se observa el como integraste el flex en el segundo motor del gimbal, verifiquen que este encuadrado el vídeo, seria excelente su vídeo si no se salieran de cuadro.

[@DJISoest]

I'v fixed this on my H32D Gimbal without watchin' any tutorial and I fixed! I used same kind of wire what u use!, anyway intresting video sir

[@gregfurnival2448]

This is a fantastic video for how it all goes together: with one problem he put the wire on in the wrong order. You need to start at the camera and work back to the gimbal base.

[@DaveCook]

This is the best video for replacing the DJI P3S Camera Ribbon Cable. Thank you so much!!!

[@ez2946]

Where can I buy the gimbal gaurd? You said link was in the description but its not

[@loubrad1605]

Thanks so much, great vid, was able to follow it and put ours back together haha

[@BigerBoy]

What is the name of the screwdriver? Nice vid.

[@mesooners1]

You have no parts for the phantom 3 standard.

[@cuauhtemoccortes4747]

HELLO GOOD AFTERNOON LIVE HERE IN MEXICO AND I CAN NOT GET THAT PART ALSO BROKE ME, WHERE CAN I GET

[@montemahler6766]

cuauhtemoc cortes you can get these things at the fstop labs website

[@StephenPurington]

nice repair work , Peace

[@KoolKyle_Adventures]

Saved my life!!! Thank you!!!

[@FelMaBo]

good thanks

[@squarefile6111]

Great video! Thx

[@markweaver1012]

My drone had almost the same damage as the one in the video, and I was able to successfully replace the arm and ribbon cable. I can't try fly today due to rain, but the camera and gimbal seem to work fine when moving the drone by hand, so I think things are back to normal. Thanks a lot for the help.

[@bmontevilla]

Thanks!

[@poerik]

;-) any link for that superduper screwdriver ? great vid

[@Imazdadrags]

Check his website...