DJI Remote Not Connecting To Drone [Fixed]

[@mountainsearch9510]

An hour on DJI tech support and they could not solve the problem. But your 4 minute video did. Thank You so much

[@Tips2Fix]

Wow Im happy to hear this, thank you for sharing this comment , if you can share this video with your friends will be helpful for tips2fix , Blessings.

[@AJ-ku7nm]

Thank you. After a few goes this worked for me. Had the drone 8 years and this is the first time this has ever happened who knows why? But all fixed and flying again now.

[@jenniferbroomhall7400]

Finally, after much searching on forums you have given clear instructions and I am flying again after tearing my hair out for weeks. Thank you

[@Bobi-ow6ou]

This saved me hundreds of repair cost, I flew my drone without problem then I took out SD card to download photos and videos the next day my drone couldn't connect to controller, luckily enough I came across this video followed all the steps and boom my drone is back in the Sky again.

[@Tips2Fix]

Im happy my friend that you like this video, and was helpuf for you. Thank you for your comment sharing with us your experience .

[@parsanaeimipoor5569]

Thank you so much , this helped me after 2 years of not using my MavicPro , i emailed DJI and they didn't respond but thank you my friend you really made my day ALOT better

[@Tips2Fix]

Wow how is possible they did not respond , wired! i'm happy to hear that this video was helpful for you. Please subscribe the channel and share if you can , this should be helpful for us to Grow Thanks 😊

[@mdubault]

I just got mine back from DJI service for a left rear arm repair. Knowing that they had flight tested the unit I figured I would have to go through the BIND process again. Your video was spot on. Thanks much

[@Tips2Fix]

Thanks for sharing

[@ilovetucson]

This has been very helpful. The tablet sees the camera however the controller still says trying to connect.

[@stevenlindgren3314]

Awesome video, I'll have to try this out after I recharge my remote. I recently had a crash and discovered that my drone is no longer connecting to my remote. Thank you for making this video easy to understand.

[@Tips2Fix]

yes im happy that i was helpful for you , let me know if everything works well now

[@kriswilhelm36]

this did not work for me. I don't get that "primary" / "secondary" option. Mine just says "linking remote controller and then pops up and says "link to RC" and after I click it then it does nothing.

[@gelosoriano]

I haven't been using my Mavic Pro for quite some time and tried using it today and had issues connecting. Thanks for your video - very helpful! 𝕊𝕒𝕝𝕒𝕞𝕒𝕥 from the Philippines!! 💗

[@Tips2Fix]

Im happy to hear that this video it was helpful for you , and thank you for sharing your comment with us

[@SaltWaterSalmon]

Excellent instruction. Quick, easy, effective. Let's go flying!

[@Tips2Fix]

Enjoy Bro , thank you for watching

[@aalapparmar1]

easy short simple way to explaining a big issue. thanks a bunch mate

[@Tips2Fix]

Yes , you're welcome

[@booneymoonrock3152]

Thanks man that really helped me out. All the way in Lexington Kentucky 💯

[@PedroMacedovideos]

Thanks man, this video really help i thought i was going to have to purchase another drone

[@Tips2Fix]

Glad I could help! And save some money 😃 If you can share the video as a post in fb it will be helpful for tips2fix

[@mjnojemar9759]

Merci pour la vidéo...cela m'a permis de ressoudre le problème que j'ai eu hier.... après 2h de déplacement je n'ai pas pu décoller avec mon drone.. Merci pour la vidéo

[@peterhewitson71]

Thankyou so much you saved my drone , I had to change controllers and it would not connect . Again you are a champion

[@byrdhouse2105]

Just got gimbal replaced and controller wasn't recognizing drone. This video helped quickly get it back connected, thanks 😚

[@hacketstown8]

Top man, sorted in 5 minutes. Thank you 🙏

[@Tips2Fix]

Thank you for your comment bro

[@harristeins3776]

hate to say it but my German Shepherd found the original RC delicious so I got a replacement from a friend and your video allowed me to link them and fly again.

[@winsmediagh]

You just got a new subscriber for this very helpful video.

[@Friscone]

Thank you my friend.THANK YOU VERY MUCH FOR YOUR HELP

[@Tips2Fix]

You are welcome

[@Tumish74]

Really thanks dude for your hint. Appreciated it and definitely time saver 👌

[@Tips2Fix]

Happy to hear that , don't forget to subscribe 😃

[@andrashorvath8753]

Thank you, very quick and useful!

[@Tips2Fix]

Glad it helped!

[@billsstudio2528]

Another, thing to check, although obvious. On Mavic Pro 3 Classic, make sure your wifi is connected by double swiping DOWN and accessing WI SETUP and Other critical items.

[@Tips2Fix]

Thank you for contributing to help others , thank you for sharing :)

[@PajaD25]

Hello. Thank you very much for the step by step tutorial.

[@Tips2Fix]

Im happy to hear that , your'e welcome :)

[@krsavchik9654]

2:05 and if the red LED is on and flashing slowly where is the WI FI and RC switch

[@paulrawstron3170]

Great help thanks. My drone away for repair and when I got it back would not connect to controller. Now sorted. Cheers !!

[@Tips2Fix]

Great 👍

[@kaidkyoung4298]

which app are you using on you Ipad? I can't find any related APPs in Google App Store

[@puangpambudi]

Very Helpful.... Thanks for your video

[@Kofipong]

After 2 years and this is useful! Thank you!

[@chadkaloy9161]

can u do one for the DJI Spark?

[@Tips2Fix]

Good idea

[@vedantawachar6969]

Thanks man ❤ you saved my life

[@Tips2Fix]

I'm so glad to hear that my video was helpful to you! It's comments like yours that motivate me to create more content. Take care!

[@vishalp.chaliha6723]

Thanks a lot for the solution. It worked for me! Subscribed your channel too👍

[@Tips2Fix]

Thanks for the sub

[@kreativekraal]

THank you so much my brother

[@Tips2Fix]

You are welcome

[@markgil7681]

is this possible with DJI MINI 2? can't find that button in MINI 2. please notice my comment🙏🏻

[@adrijonskas6103]

2:56 what button you have to press?

[@Tips2Fix]

sorry for delay answering we didnt see this comment , its a small button reset button , did you fixed yet?

[@nettojd1666]

press the linking remote Controller button to startlinking Remote controller is linking. Linking will timeout after

[@vehicleobsessed3389]

Thanks! Your video helped me.

[@rizjani405]

Thanks .. U r a life saver

[@IkonicLionProductions]

Fantastic instructions. Cheers!

[@klastorps]

Do you know is Mavic mini has a button to?

[@Jimrogalski]

You saved the day! Thank You!

[@scandinaviatrip8328]

Bro thank you very much for your explanation and help.That worked perfectly 👍

[@Btalks1]

How to it with mavic air

[@dbtech6272]

thanks a lot bro, this is very helpful

[@darrinanddonna]

Great tutorial, looking for a cheap second hand Mavic with problems like these. Subbed 😀

[@Tips2Fix]

Thank you for sub :D

[@antonioefalate]

thx bro you video very helpful

[@kiran.vedula]

Thank youuuu!!!

[@marcaobilly]

Obrigadoooo. Parabéns , inscrito no canal!

[@MRBATTISTA1]

thank you.....got it working !!!

[@mahmoudbamarni3803]

good night. how can I contact new controller to mavicair2

[@joshhouston7682]

Thank you bro! You've saved me

[@Tips2Fix]

You're welcome Bro, enjoy flighting your Dron :)

[@iolanisjourney4828]

Thank you! Super helpful!!

[@Fonz19]

Thank you I'm up and working now

[@Tips2Fix]

Supper , enjoy piloting the drone

[@aharleyguy]

Using a very small screwdriver, i could not get the button pushed to change the light back to red? What can I do next?

[@christopherseymour7044]

After pressing "Link remote controller" button, mine doesn't give an option to click "Primary remote controller" Instead, mine says "Confirm controller frequency?" And I can only click "Ok" or "Cancel" Whats the issue with mine, whys it different?

[@damienbowerman8636]

THANK YOU! Saved me!

[@Tips2Fix]

Glad it helped!

[@yigitc1887]

Nice video!

[@chrh2929]

Big help bro !

[@davidscottblacksmith]

Thank you for helping me 😊

[@bryceeckert4200]

Many thanks

[@SpiritualStuntman]

Thanks 🙏🏽

[@eroextha2952]

when i click linking remote control it says link RC? with cancel and OK option but nothing happens . .. plz help . , i m using i phone

[@asiazri7754]

ME TOO. Did you fix it I really need help I’ve been trying to fix it for THREE years. Please help

[@SamJewel]

Hey thank you for that I have been going bonkers but it still did not find the drone just kept saying "binding" on the controller and beeping with no connection. I got the drone to go red on the little light and all the rest but no connection. Can you help?

[@Ale_-bx6jb]

Same problem have u solved ?

[@SamJewel]

@@Ale_-bx6jb i think i sold it and bought a new model that one just would not match with my phone

[@derrinrguitar8011]

Thank you!

[@fbijaguar1194]

What's the app called

[@Tips2Fix]

DJI GO 4

[@ugolovniyrozysk]

Worked. Thanks!

[@randycrocker114]

Someone help me? My drone is doing the exact same thing not wanting too connect too the drone and the camera is going crazy and couldn't get it too connect what should I do?!

[@dvstudio7521]

Thanks

[@adiwijayakusuma6970]

I tried but failed, after I checked the dreadlocks camera problem, .... what should be replaced sir

[@yahoolyafool]

It didn't work for me; remote still says connecting, and the camera footage will not appear on my device (tried with two separate phones). Did the whole remote link to no effect. I am able to make the drone take off, but without being able to record or see what I'm doing, it makes it very pointless. Ugh, this issue has caused me to waste so much of my holiday time just looking and trying solutions.

[@Ale_-bx6jb]

Have u found a solution got problems too

[@itsmecharlie100]

When I click on link remote controller, it says confirm frequency settings. I clicked that and nothing happens. Help.

[@juancamilobastidasaponte1588]

It didn't work for me: after push the small button, I needed do it several to turn it red, and once red, it didn't connected. Any other idea?

[@filipesilva1395]

I have the same problem.

[@v0lkmaster252]

My sh1t just says. Ready to fly then disconnected and back and forth. I bind the controller and drone and I don't even see the camera mode

[@frankconsidine5989]

Did not work for me controller does not connect with app at all. Also controller shutdown after 3 seconds. Any help would be appreciated. Just got three days ago

[@miguelito6915]

Mine still won't connect and no camera view either plus on power on of drone one motor doesn't move and lights are solid red

[@charleshall2942]

ok so my Mavic Pro turns on but I get no bilking yellow light. also no light in small door next to button. it also won't connect to assistant 2 to do a factory reset on drone or controller. need help please.

[@Tips2Fix]

did you fixed yet? Try Hard reset. Now open the DJI Assistant 2 application on your computer, then plug your drone to your computer via USB cable. Afterward, click on the Mavic Pro icon to select it. Then click on the Firmware Update. Now click on the Factory Reset button in order to restore the device to Factory Settings.

[@tahaatl3449]

hello, did you solve the problem, i have the same problem

[@nenavathdharma4238]

Super bro drone

[@abedimathias9424]

aider moi svp, j'ai tout essayer; je n'arrive plus a synchroniser mon drone dji mini 2 avec la télécommande; j'ai tout essayer mais ca ne marche pas, aidew moi svp

[@BeudohChannel]

where the button in mavic 3 ?

[@windsongdj]

I have done this 15 times I can't connect

[@bobbyheising4094]

mine connects but doesn't connect the camera and won't let me fly

[@Tips2Fix]

can you try to reset your drone?

[@studio47piracicaba]

Obrigado pela ajuda! 👏🏼👏🏼🙏🏼

[@lsantos79]

Not letting me to activate it

[@Tips2Fix]

why does it says anything ?

[@pilot4hire]

When I push the reset the light continues green but the remote never sees the camera. I can not reset... can you help please.

[@jake24680]

Just to make sure you're ISO didn't get turned way up (or down) try to reset your camera settings. See if that brings video back to visible. The screen on my mavic pro was completely black when i first turned it on. I set camera to auto and the picture came back. ISO had been turned way down by previous owner, for very sunny day conditions.

[@12POLIO]

I have this same problem, did you figure it out? My light stays green after pressing and my remote never connects

[@v0lkmaster252]

Nope didn't work for me still blinks ready then disconnected ready and disconnected. I tried multiple wires and different ports

[@_CONBOY_]

Mine won’t pair need help bad

[@aharleyguy]

Ok, Still having some issues here, Followed your video, Until I tried to reset the button on the drone, the light was green and I tried to push the button. not sure the button would push in or any indication that it did. The light did not change to red as in your video. so

[@RFT2112]

Not Linking times out everytime.

[@Tips2Fix]

Try to reset it all, maybe you need to firmware upgrade your drone

[@Legionnairemonfrere]

thx u bro !!!

[@tracymefford8162]

The light won't come on

[@Kemal655]

Dont work on my mavic :(

[@Tips2Fix]

why did you click that reset button? what is your situation?

[@v0lkmaster252]

Mine freaking blinking from ready to fly and disconnect damn annoying

[@CollinCabral]

It doesn’t work

[@Kevin-rs7uk]

Didnt work

[@nenavathdharma4238]

Phantom 4 pro drone cost bro give me

[@AnabolicPopcorn]

why is everyone fast forwarding the actuall stuff people want to se.. show the 100% process.

[@georgioantoine4194]

what App is being utilized?

[@Tips2Fix]

As i remeber , it was the offical app Djj mavic pro app

[@glennmarron]

Very useful. Thank you!

[@swagsurfer05]

Thanks man, it worded immediately

[@Tips2Fix]

Supper im happy that you found this video helpful