BUILDING a "LINDE" HYDRAULIC FORKLIFT - "PRESSURE SYSTEM" - LESU ALL Metal KIT PT 4 | RC ADVENTURES

ASTOUNDING is a word that comes to mind when I think of this kit. This build continues to test my skill level and blow my mind! This radio controlled LESU Forklift is the first "affordable" Hydraulic Forklift I could get in the studio, and it is so much more than I ever could have hoped for. Everything is fitting together so well, and the instructions - although can be a little misleading are easy to figure out and read.
As you can see - this small challenge has been paying off in dividends if I am referring to fun and time spent building. I thought this was easily going to be built in a few hours. I was incorrect. Now, granted - filming the entire process takes a long time .. but there are lots of little details that take some "paying attention to".
In this video, I am finally able to install the drive motor, transmission and the steering assembly. THEN - I went FULL ON - and tackled the hydraulic system in a way that ANYONE WATCHING should understand! I am amazed at the engineering that went into this design. Someone sure put a lot of though time and effort into this model - and I can tell that by all of the brass tubing. The fitment of it is on point. Lesu will sell many of these machines. As they should.
This model is about $1000.00 USD depending on where you find them.. so they are a heavy price for a seemingly heavy machine. Time and use will tell if they are worth the money. So, Ill put it to work as soon as I am done building...
For more information about LESU products visit their Facebook page here: / lesurcchina
CHECK OUT THIS USA LESU Distributor! semijoerctruck...
SUBSCRiBE & “Ring the Bell" ► bit.ly/JOovvU
"1 Million Views Club": bit.ly/2AYVrAF
RCSPARKS Shirts & MERCH: shop.spreadshi...
RC ADVENTURES™/ RCSparks Studio™ © 2019 Medic Media Productions Inc. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without the prior written consent of Medic Media Productions Inc.

[@TheRealRCSparks]

This is easily one of the most amazing pieces of engineering I have ever had the pleasure of putting together...

[@ghst1536]

bro what do you think is a good rc car that is fast on the road and dirt that costs less than 50 bucks

[@ignKenny]

TheiPadKid _ I would recommend the ECX AMP MT it’s $139 I have it and like it but you will need a bigger battery and servo to do grass well but it’s a great kit would recommend

[@michaeldeering798]

I love watching your builds, I would watch every minute if you posted it, ' worry about blocking shot, if the videos long enough we will get to see all angles eventually anyway.

[@reaperofsouls7700]

could you do a full step by step build video in real time some time later rc sparks,plus what is your real name man eh?

[@jefferymuir8456]

That thing looks amazing, I love loading wars can’t wait to see it in action

[@jamesgensamer6912]

Lol. Yes, I watch almost all of your videos to the end including this one. I am a novice to all these “modern” RCs not having done anything RC since 1997. You do a great job explaining everything without being boring. That is true talent!!

[@GraemeSalvage]

I like watching the smaller details being made

[@mikewood7946]

And I enjoy seeing you fight with putting and working all all of these wonderful rcs that we all love to work on shows us that it's not just us that fight with them

[@austinwhitmire9377]

Your build series on all of the scx10s and rc4wd is what hooked me in the beginning

[@danielcampbell3686]

That little forklift is a thing of beauty, Your mates will be fighting over who gets to run it on loading wars

[@michaelwalker88]

true

[@joejohnson-feeney3410]

I honestly love seeing every detail step by step

[@shortbusecv49]

I’m still watching and whatever works easiest for you sir. I will watch whatever you provide us. Keep up the amazing work sir.

[@TRKISH324]

Dude, you caught me with your mud courses in your backyard of the townhouse (rowhouse, whatever), you kept me going with fast and high jumps, now I watch your well built RC course (I love the muddy parts still), mining, building videos, loading wars, TTC, your boats fast ass boats up the dam, unboxing.....everything! You keep doing your building (assembly) videos any way you want, we are hooked man!

[@TRKISH324]

And the Mo-ments spent with those you love, everyone having fun.

[@hansottevanger4112]

Wow I think my fingers would end tided up in knots with that kit, it really is a beautiful,compact work of art!!

[@rookie101_]

Those hydraulic lines are an absolute work of art !

[@scottharris6423]

At 06:30, yes I still watching, to the end as always! You do find job of showing & explaining how items go together!

[@LuxxyHD]

I’m amazed on the quality and detail of even the smallest objects even if you can’t see it from the outside just hoping that the hydraulics work

[@vitalej00]

That is unbelievable forklift. Can't wait to see it in use. I personally enjoy your build videos with detail.

[@kennethdent1662]

Your excavator build was by far the best for me! Keep on building on!

[@rowan2128]

I have to agree with you that is the most amazing build next to the excavator build!! I am loving this build!! I can’t wait to see it moving and lifting things!!

[@Godzilla032]

I like seeing each step of the build. Its satisfying to watch it come together. Keep up the great work!

[@bakerredrum]

That hydraulic design is really technical. That took some talent to make.

[@russellswinehammer772]

Man that is a friggin cool build!!! I can't wait till its finished and hauling pallets around the ware house!!

[@semperatis]

That forklift is unbelievable Aaron....good job on getting this far.

[@jwhitevlog]

Of course we are still watching. I have never been a fan of the magic of TV, I like all the dirty details.

[@lifestylebyav5683]

Piece of art is this machine...Medic, u make such complex builds look so easy & we all know how meticulously and painstakingly u make vdos for us. Tons n Tons of respect for ur hard work and bringing such amazing content 👍🤘🤘🤘

[@kurtguy4336]

That’s totally amazing like the craftsmanship in the tubing is well worth the price of the forklift. Hopefully you’ll having it working on the next episode

[@rcdreaming5460]

I watch every second, more detail better. Your builds are awesome.

[@ericviger4984]

Been a while since I commented. This ones been really cool to watch, as always thank you for everything you and your family do in this hobby in order to entertain us. Great job!!

[@Agibs90]

I love your detailed build videos medic. I cant afford the kits and electronics so watching you build these rigs lets me live it through you.

[@novavroomvroom2979]

I'm watching to the end.... you're doing it right... keep doing what you're doing...!!!!!

[@renterp]

For sure still watching, and I like seeing it built. That’s a lot of time consuming work. Show it off with pride. Keep up the great work bud!

[@kendrickh91]

I love every second of each build. Keep them coming!!

[@paulquintoa8348]

I definitely like seeing the build and how it’s done, but I do understand skipping through a few things.

[@jonasnorberg2293]

Font forget the pressure valve. And I love the color, it's a little Swedish theme over it.

[@mrsaizo0000]

I love the blue and yellow colors!

[@gechelem23]

I like the detailed videos personally. This thing is awesome. I really like the brazed look as well. Keep up the great content

[@mrphonephreak]

Looking awesome. Can’t wait to see it move!

[@Kalimac]

A. Yes I'm still here B. I enjoy seeing how it all goes together

[@jairavelino8369]

To acompanhando do BRASIL. CADA CAPITULO DESSA MAQUINA. 😁

[@caseybinion806]

Omg that a masterpiece insane how small can’t wait to see it working !!!

[@ratlme]

Another awesome build. That is going to be an a great Forklift.

[@jlane158]

Its looking good. Cant wait to see it finished

[@thedumpydustman6088]

Wow defo beyond my skill and patience levels! Nice work buddy!

[@STEVOD313]

LOL The Jesus clips! Man I love building kits but the e-clips is not my favorite part, most guys will agree. Its looking so kewl broski n love watching it come together n how it all works n seeing how it was designed

[@STEVOD313]

I do like watching each step but have done building videos before I know how much more time n extra effort it takes to explain n record every single step

[@optimusdude]

Wow man, I just cant express how much I love this build. Such awesome design features and incredible craftsmanship on the Lesu kits. Cant wait to see where the brushed and brushless escs are gonna go as well as the sound kit and battery lol. Looks pretty limited on space. Bravo buddy

[@weldorman8495]

Considering all the hydraulic piping, hydraulics and general apparent quality of the components, I'd say, for the price, that this little guy is probably undervalued.

[@gwpattrick]

I like seeing everything you build that way you can either skip or rewind the video. And i have been watching your videos from 6 or so years ago. You guys had to piece them trucks together to make them work. I feel spoiled from the rtr trucks that i have. ill have to build one, to truly get to know them. Thanks

[@christophereng815]

I like the way you show the steps currently.

[@Handicapkilla94]

Defiantly watching still and either or step works for me as long as you explain what you’ve done which you always do so it does not matter lol

[@Teton30000]

You know what you haven't done in a long while we need a studio walk through there are so many new viewers

[@alinit8982]

Wow bro that valve block is amazing

[@roadie5872]

Colors are good, this build is awesome

[@kingsummit5310]

You should consider getting a 3D printer to print RC parts like new servo horns. And maybe you could do a build series where you put together 3D printed RC cars.

[@brandoncaldwell95]

He has built a 3d printed rc. Also his snow blowers are 3D printed.

[@tylerarndt1667]

Yes!

[@HairySteveUK]

I'm building a couple of 3D printed diggers, it's a pity I live in the UK otherwise I could use them in an episode of KZbin Gold :) I was joking with a couple of guys I know who do R/C trucks that we could get a load of us together with diggers and tippers and do a series called KZbin Mud :)

[@cb01ttr]

Brilliant, thank you for showing this. I need to build one of these!!!

[@GanpaK]

I like to see every detail of the build. Even if hands get in the way.

[@Onyxtinct]

Loved the mario underground theme cover. Truly a classic.

[@johnehammondjr.678]

Keep the videos coming cuz I like to watch them

[@jamesglenn2006]

Its definitely one of your coolest builds, cant wait to see the red one. I say red/charcoal 🙂 Your builds are always Epic, LESU is helping you make it next level x 10 these last couple. Great work Medic 👍👍 Hydraulics 😮😁

[@justinchmelnyk6255]

Amazing little machine I like haw the spindles are welded not just all cast. And the way u do ur vids is perfect I think.

[@theminion2771]

I love loading wars. Wish there was something like it locally. And that forklift looks amazing

[@chiccorocker]

Yes, still watching and it looks great! I think you know better if it's the case of showing off all the little steps (or not because all we can see are your hands eheheh), or use the magic of TV. I would say you judge case by case, what you like more :D

This is a really cool Forklift and looks very high quality......thumbs up Bro👍👍

[@alwheeler8302]

Great, fun little build, for sure.

[@wolffin100]

Love this build , looking forward to seeing more and it's debut on loading Wars

[@timtraverthediecastcollect6482]

I just had one of my friends of mine told me about this channel, I also I trying get into RC Cars/Trucks, I totally love y'all, I enjoying the Loading War show alot, My favorite person on there Krazy Joe

[@mikey6918]

Looking good . I'm excited for loading wars .

[@boudreaubear9201]

Man I was weary of the price but it's 100 percent worth it. What an amazing piece of machinery. Loading wars

[@Stoner_Inc.]

i cant see anyone complaining about the cost of this RC watch tell the end and you'll see why i say that! So beautiful Aaron!

[@scottharris6423]

I dig this build. I finally could understand how the servos & hydraulic block goes together & works, why? Because the you explained & demonstrated! Thxs!

[@rockinrc4146]

Awesome Medic. Thanks for sharing

[@henriknordeng]

Color is awsome. Really cool build

[@stressedlacky42]

This is looking amazing!

[@billlynn316]

Your show is awesome.

[@williamhobaugh5088]

Yes it's awesome and that's why I have been watching for the last 10 years or so

[@steveley4198]

Dude your videos are awesome and I believe that if you show the steps , people will understand more about what's going on ...my favorite ride you have is your k5 blazer so badass

[@desertfun4all650]

I'm loving these building videos. But the suspense is killing me. Lol. Keep up the great work and amazing videos. God bless my friend.

[@adamtebben9512]

The more details you can show, the better!!!

[@fabianbisson4459]

Omg so cool. Can't wait to see it being used in loading wars.

[@nickel2346]

That is a hecka cool forklift. It will most certanly take loading wars by storm

[@projectrc4610]

I like the detailed videos it's almost like rc school lol I get ideas every time I watch love all the content from adventures to reboot to the ttc it's all good stuff.

[@skylermusavlogs3888]

I don't own a rc but I love your videos keep it up man!!!👍

[@streamylc]

You'd fall in love with the contour of gunsmithing flathead drivers for that tiny hardware. Its taken me until this installment to "absorb" the color scheme ;-P... BUT, I can totally dig it now... especially considering its a rig for a game show where the "sides" are very much differentiated by color (i.e.- "Innnn the RED corner!!!!").... also the vibrant color on the rims is gonna be sick helping the eye focus on those close up maneuvers & penalties.

[@BrothrBob]

Medic, I enjoy your videos very much my friend.

[@smack2006]

Your builds are awesome!

[@troyroquette261]

Badass little forklift

[@spartan-fpv6936]

Gday Medic, nice job mate i enjoy the building part of the hobby thats how i started in rc cars as soon as you learn to build you know how to repair your rc's so i watch all the building on the show mate, you have to build another one and paint it red.👍🚑🇦🇺

[@rossgross7497]

Dang that is a complex build . Love it

[@jzink6797]

Dude i have been looking forward to this every time i see i have notifications about your ch. Awesome !

[@allanrichards6448]

As you say this is an insane build, just like your excavator. I think for $1000 its very good value. In the first video I thought this was the first off kit so where there are issues or mistakes in the instructions you need to put this in an email to the company for them to rectify things.As an experienced builder yourself you get around problems and issue easily but others may struggle.

[@alinit8982]

It's critical in a build to show step by step but as for the struggle it's gotta be hard on you to try and show it going together especially when trying to keep your fingers out the way lol I love it either way bro keep up the good work

[@christianmarleton1333]

You should try to visit the Lesu factory in future videos. Would be so cool to see how it’s made.

[@DMSparky]

Amazingly awesome!

[@michaelhoyle2665]

I like seeing all the steps, or at least the highlights of the steps. You do a great job editing. Enjoying this build regardless of the size of the nuts. Lol. Fingers crossed you don’t have any issues with the hydraulics like the excavator.

[@scottledin8210]

Man your hilarious! Cool build. I think I need to buy one of those!

[@rcdudes6365]

Man! That is one really cool build. But I think the excavator was cooler. More to do. But keep the awesome videos coming. Love the commentary . 👍

[@robertedmondson175]

Love it man.. it's look sharp,.

[@typical_nite8688]

I love your videos rcsparks

[@doughty1967]

Charge the camera battery and get back to work! very cool piece, can't wait to see it working on the dock.

[@rcmcguyver7561]

That's awesome medic amazingly small hydraulic system

[@ejs6097]

6:00 Seriously dude? Making me pause the video to tell you how much i love you...?!? Cheeses and Crackers, the things a guy has to do... : D All jokes and mad love my dude! I personally am 1 who really appreciates the details. I think you work in a nice balance of what may need to be seen by builders, and always what is appealing to be seen to the everyday viewers. Thank you for everything you do, and the way you do it brother! You Tube GOLD all the time! : )

[@andyrichey1192]

Yeah that's a piece of art

[@Iwaswrong578]

Dude I love when you put it all in. If you want to please everyone. Right at the beginning put in a “skip too” menu with times so people can fast forward if they want too. I’d rather you film it all and be able to skip ahead, then not be able to choose. Love the videos either way medic as always brother! 👊😬👍 *Edit* Now that I’ve watched the whole video I absolutely love everything about that build and all your builds brother. The intricacy in that little R/C is incredible! Back to back hydraulic builds, thank you very much!!!

[@Gavin-xm2bg]

Sick forklift can’t wait for season III

[@travis4man]

that thing is awesomeness!!!