Here i will explain how DLP projector works, we will have a look at the stuck DMD Mirrors, and replace DMD Chip
Пікірлер: 54
@ts_lauraven215510 ай бұрын
Thank you very much for this tutorial, I can repair my videoprojector with success ! Keep it up the great job :D
@playgirlcha2977 ай бұрын
The video I've been looking for 😭😭😭😭
@metanoian9658 ай бұрын
very interesting. good. very helpful. takes the mystery out the toy, and DIY saves $$
@shamielwilkinson1950 Жыл бұрын
Very informative
@nabilaboshady7528 Жыл бұрын
very good👌👍
@joshuamungasia45293 жыл бұрын
hi I have LG projector model Bs275 stuck on standby,checked logic board by applying external 12v and 5v it comes on ,but power supply only gives 5 v ,missing 385v and 12v,tried to check components everything seems to be okay, could you be having schematic? how can you advice?
@joshuamungasia45293 жыл бұрын
thank you from Nairobi Kenya
@MaxELECTRONICS3 жыл бұрын
Unfortunately KZbin must have removed your comment. Can you post again?
@joshuamungasia45293 жыл бұрын
@@MaxELECTRONICS hi I have LG projector model Bs275 stuck on standby,checked logic board by applying external 12v and 5v it comes on ,but power supply only gives 5 v ,missing 385v and 12v,tried to check components everything seems to be okay, could you be having schematic? how can you advice?
@joshuamungasia45293 жыл бұрын
This is the request I had
@MaxELECTRONICS3 жыл бұрын
I haven’t got schematic for it, they usually dual power supply so there’s one for standby power and secondary for the rest of the circuit. Check secondary power supply, cold me smps chip on power supply or check diodes , those power supply’s very similar to computer power supply’s
@Pemikat_Sangkar_Jebak2 жыл бұрын
I like this channel
@robinshen75762 жыл бұрын
Thanks very much for your video, it's very good repairment video. For the flickery in the video, is this a drawback for DLD projector? I think the 3-LCD system hasn't such kind of flickery, is it good to eye?
@MaxELECTRONICS2 жыл бұрын
Yes all DLP projectors are flickery due to the rotating colour wheel. LCD don’t have that flicker.
@nileriversoftware40702 жыл бұрын
I thought the new DMD still had dead pixels, but I was just looking at my own dead pixels.
@exorbis98802 жыл бұрын
What type of TIM (Thermal Interface Material) did you use for the heat sink installation ? and what thickness ?
@MaxELECTRONICS2 жыл бұрын
Hi, I used the one that was included with the DMD Chip.
@BrodyOdieOdie11 ай бұрын
How would I go about finding the proper chip for my projector? I have an Optoma HD146X DLP Projector.
@MaxELECTRONICS11 ай бұрын
You’d have to remove the DMD from your projector, on the back of DMD you’ll find the number, simply go to AliExpress and search that number, you’ll find the DMD replacements.
@marcobernal2493 жыл бұрын
Hi, May I ask if there is any chance to fix LED projector with the same problem?
@MaxELECTRONICS3 жыл бұрын
Yes, if it’s a DLP LED projector, LED is just a light source, the random dots on the screen are caused by DMD chip, I suggest taking the DMD out just like in my video and have a look at the surface of the DMD, if it has random tiny dots then you need to replace it, if it’s perfect like a mirror then DMD is good, you’ll need to look through magnifying glass.
@charlyshomestead92012 жыл бұрын
Hi I have a NP115 NEC DLP projector with similar issue. Do you know how to find the DMD Chip ? How much does it cost ?
@MaxELECTRONICS2 жыл бұрын
Hi, you need to open the projector and remove the old DMD chip, it will have the number on it something like “8060-6038B”. You can take this number and ether Google it or search on eBay, they cost anywhere from $60-$100 AUD.
@vehiculeselectriques Жыл бұрын
Hello, thanks for sharing, do you tried to repair the DMD chip as you said ? (testing hot, cold, chocs)
@MaxELECTRONICS Жыл бұрын
Yes I have, no luck at all, not a single change in any mirrors, the only way is to buy new DMD.
@vehiculeselectriques Жыл бұрын
@@MaxELECTRONICS thanks for your feedback, may i ask a tech question please: i trying to rejuvenate a W1070 after OEM lamp explosion, all cleaned good and in good place, color wheel turn and start ok, 385V at ballast, unfortunately i only have cheap no name lamp (200Mohms). Image is flickering like creasy with a blurry out of focus range aspect, menu is unreadable, i can distinguish Music note menu, etc. and the menu lines but impossible to read text inside as there was nothing. do you think poor lamp capable of that problem? Thanks
@MaxELECTRONICS Жыл бұрын
Yes that’s possible, Is the Lamp itself flickering? I’d check the lamp and ballast if the lamp is flickering.check that all connections to the lamp are good.(while powered off)
@vehiculeselectriques Жыл бұрын
@@MaxELECTRONICSthanks for your answer. just image lamp is not flickering but it is now dead (1mn usage show 9Mohms instead of infinite resistance) so it's not accepted anymore LAMP RED flashing wich is a good thing for ballast protection. When lamp was lighting BENQ menu was apearing and disapearing from blue to some sort of white screen. Will test with OSRAM lamp with fingers crossed
@MaxELECTRONICS Жыл бұрын
Sounds like a bad connection between board and DMD chip , also check strobe sensor on colour wheel (it’s a black line that rotates pass optical sensor on colour wheel rotor)
@aleks18034 ай бұрын
can I use camera lens cleaning kits to clean the dmd chip 😊
@MaxELECTRONICS4 ай бұрын
Yes you can
@Batatascozidas2 ай бұрын
Hi, i cannot find any replacement for my dmd chip as it is a projector with just a few units sold (Anker Mars) Does a video or imagine pattern can help un stuck rhe mirrors? At least make it better? Thank you
@Batatascozidas2 ай бұрын
Anker answered that there is no replacement chip for this device, it does not appear to be repairable 😢
@sentrydadefiant96072 жыл бұрын
I have some black pixels how would that be fixed is it the same dmd chip problem as yours ? I have the uhd50 optoma
@MaxELECTRONICS2 жыл бұрын
Get the old one out of the projector and there will be number on the DMD chip, search it in AliExpress. You could also try eBay but I find it more expensive there.
@sentrydadefiant96072 жыл бұрын
@@MaxELECTRONICS thx
@playab0yyy Жыл бұрын
Did you repair your UHD50? I have the same projector with a white dead pixel. I assume I need to replace the DMD chip.
@MaxELECTRONICS Жыл бұрын
Yes, you’d need new DMD, pixels can be ether white or black, depending in which position the mirror got stuck in.
@smolbodybuilder16024 ай бұрын
where can I find a dmd chip replacement for my BenQ W1070? on top it says 5166857 1910-6039E and on the bottom 59Z1QWA 190905E
@MaxELECTRONICS4 ай бұрын
Just search those numbers on AliExpress, they sell them.
@smolbodybuilder16024 ай бұрын
@@MaxELECTRONICS those specifically can‘t be found
@MaxELECTRONICS4 ай бұрын
@smolbodybuilder1602 see if numbers closely match and they’re same pin configuration and same resolution and look the same. Sometimes numbers slightly different as it could be newer version
@BARUtubbig Жыл бұрын
The face looks like someone wearing a crown, like the holy grail
@TechandDoc6 ай бұрын
Do you offer this as a service? I trust you far more than any manufacturer technician.
@MaxELECTRONICS6 ай бұрын
I am but local only, it’s actually very simple to replace the DMD. You can do this yourself.
@TechandDoc6 ай бұрын
@@MaxELECTRONICS I guess I will find out! I just ordered a new replacement DMD for my JVC LX-NZ3W. Hopefully i can find a teardown of that or use your vids to best-guess my way through DLP disassembly 😅
@MaxELECTRONICS6 ай бұрын
@TechandDoc it’s pretty simple, they usually more or less the same construction.
@tibbified4 ай бұрын
How did it go? I have a customer with an NZ3 that is only about 2 years old. They started getting spots in the corner. If it went well, where did you get your chip from? @@TechandDoc
@michaeldasilva210083 Жыл бұрын
Where can one purchase these chips?
@MaxELECTRONICS Жыл бұрын
AliExpress or eBay
@user-vt3on1vq2f5 ай бұрын
А вольт молчит
@rajzoo1 Жыл бұрын
Hi I have a NP200 NEC DLP projector with similar issue. Do you know how to find the DMD Chip? How much does it cost?
@MaxELECTRONICS Жыл бұрын
You can find them easily on AliExpress, when you get the old DMD out, you’ll find a number on the back of it, search for that number on AliExpress, they usually around $70-80