After recieving my 2jz engine back from Miguel Harlaque aka Miggy Built, I noticed the motor was super dirty. Instead of putting it in, I decided to take it apart and have it checked. THIS IS WHAT I FOUND!!! My instagram: ...
Пікірлер: 1 200
@jesusgurrola70622 жыл бұрын
I’m here after hert’s engine blew as well😂😂
@Its_Mike_Myke2 жыл бұрын
Lol I warned him
@diceraww2 жыл бұрын
Yo this nigga blew up my homies s13 2j also!! We finna stomp him out we on his numper rn!
@804MRMAN Жыл бұрын
Yup, after seeing Hert deal with him and the engine failed I ran from his IG messages. Lol
@123Nclark2 жыл бұрын
At this point man just take all your builds to professionals, no more second chances to people that half does the job. everything needs to be done right!
@PontiacSpazz2 жыл бұрын
🙄🙄🙄
@joker210vvr2 жыл бұрын
Then we are gonna have those people be like “I hate seeing youtubers paying for their stuff instead of building it like they used to” they get annoying
@PontiacSpazz2 жыл бұрын
@@joker210vvr we been saying that that’s y we come to KZbin we ain’t come her to see all the aftermath
@mrmeadowsiscool2 жыл бұрын
He lost time not money with trying Miguel again. He gave him the chances and now he’s over it. Is what it is.
@lancemiller98662 жыл бұрын
100% rite no second chances for the crappy engine builder professionals from here on out
@TheJsheffield2 жыл бұрын
I think he’s stealing good/ Oem parts of everyone’s motor for his own and sending back rigged Frankenstein motors so ppl can keep coming back. Dudes a con artist. I’m sure he makes good motors that run perfect to finesse ppl to bring in more customers
@Ant6O72 жыл бұрын
He’s definitely stealing all the good parts and giving people the beat up shit
@AlphaMachina2 жыл бұрын
That's what this shit looks like.
@KeepItReal20242 жыл бұрын
@Almost A Boomer 🤡
@rotarynut272 жыл бұрын
@Almost A Boomer first thing i thought when i read the comment. Straight from Hennessy and Farrell playbook
@lbanks1soldier2 жыл бұрын
My last shop did the same shit. Stole alot of my parts and put them on other cars. fuckin hate scammers
@tracymoniz53522 жыл бұрын
Crazy how people still trying to defend him bro all the facts are out in the open
@devon50782 жыл бұрын
dude been getting torn apart for years in every jz forum, been had a shit reputation
@Ilovegirlfights22 жыл бұрын
They have of guys who they don’t fuck over. The people who do a lot of business with them that use as a smoke screen.
@da9pauly2 жыл бұрын
Too many people don’t want to be held accountable for what they do nowadays!! Thanks for keeping it straight!!!
@Kinganytime2 жыл бұрын
Awww nawww cuz !!!
@Its_Mike_Myke2 жыл бұрын
Yo boy Hert next on the list for a blown motor lol
@elyasrasti89432 жыл бұрын
Piggy Built
@ilack46112 жыл бұрын
Lmao😭
@drivenstreetillusions96622 жыл бұрын
Lol get ya boy right lol need to donate to the build and get this engine right lol
@RoninJay4082 жыл бұрын
#shittybuilt
@Zosh2 жыл бұрын
That’s so trash dawg. Smfh
@shotsbychinooo51332 жыл бұрын
A goat 🤟🏼 supporting a goat amazing 🤟🏼
@renlo7502 жыл бұрын
Anytime a dude spells tomorrow as “tomoroew” you shouldn’t trust anything from them 🤣🤣🤣🤣
@Gone7022 жыл бұрын
😭💯
@VicinalElk441042 жыл бұрын
Now that depends. There are people who dropped out of school and became mechanics and could do literally anything when it comes to a car, and there are others that are well educated but use their intelligence to con people in the auto industry. That is very prevalent in dealerships and such, where the head technician will con you out of stuff your car doesn't actually need to bring the prices up,, and then never actually replace the stuff, just clean it up a bit. Whereas you'll find a mechanic working out of his backyard shop in the middle of nowhere that can barely spell his own name, but will have your car right in record time, charge you less than most other places around, and will even hook you up on small, quick jobs for free. Old head mechanics are like that. They didn't bother to graduate because working and making money was more important. They can't tell you the capitals of all 50 states, but they can tell you exactly how thick of a shim you need to put in to set the contact patch up for your ring and pinion gear just by eyeballing it, can tune a carburetor to near-perfect by ear, can fix stuff they've never even worked on before like they've dealt with that car for years, and can build a car from crap in a junkyard and make you baffled at how well it turned out. I've personally witnessed that last one. Dude came into said mechanic's shop with a Toyota camry that was rear ended pretty bad. The trunk was pushed up all the way to the rear seat. The mechanic got a junk car of the same year that was wrecked in the front for a couple hundred bucks. Wasn't even the same color. He cut both cars right at the rear floor board, welded the junk yard rear portion onto the rear ended car's front portion. The car measured absolutely perfect as far as wheelbase length and everything. He brought it to get an alignment in case it wasn't quite right, and the alignment machine brought up zeroes. The car had a perfect alignment. All that was left was the paint. He went and got the paint code for the original car, and painted the back half to match in his own backyard. The only way you can tell, to this day, that anything happened to the car, is if you look underneath the car and see part of the bead, as well as a little slag because he couldn't hide that portion for the customer, because it was in a gap and couldn't be sanded or covered. Trust me when I say the story about the mechanic is true, as that mechanic is actually my grandfather, and I was working for him when it happened. I'm actually the one who welded the car, and he cut the car where it needed to be cut beforehand and painted it afterwards. I know that story can be a bit unbelievable, especially in a car that had a unibody, but I swear on my own life it is true.
@buddyrebel_Garcia2 жыл бұрын
Maybe it was typo! You’re so perfect all the time right?
@renlo7502 жыл бұрын
@@buddyrebel_Garcia you don’t have to be perfect to proof read before you hit send….
@buddyrebel_Garcia2 жыл бұрын
@@renlo750 ninja please
@txuj_tseeb31592 жыл бұрын
U plan on taking any legal actions towards him? He literally destroyed your motor and u basically paid him to destroy your motor
@2wheeleddemon9992 жыл бұрын
I would
@superduty45562 жыл бұрын
@@2wheeleddemon999 cost more than he'd get back.
@Jay-dx9fi2 жыл бұрын
take that same money you were gonna spend on the legal process and give it to the homies. Watch shit get done real quick
@howabouthetruth21572 жыл бұрын
@@superduty4556 Ya don't need an attorney to sue over this. You use the engine & parts, plus the testimonies of professional techs/mechanics. The judge will make the crook pay for ALL costs, including court costs, the costs to the witnesses also. Trust me. I've seen it done multiple times. NO crook or his attorney can beat physical evidence plus the testimonies of professionals. He also has the phone texts.
@superduty45562 жыл бұрын
@@howabouthetruth2157 making someone pay is very difficult, outside of garnishment.
@anestossmith96872 жыл бұрын
Anyone that knows about building an engine knows that everything we just saw on this video is a no no when assembling a motor.All that scoring on the cam journals are a sign of disaster to come,just a matter of time.Respect Mike because know people know about this dude
@ehsivtec38852 жыл бұрын
ALC takes care of their costumers.. I’ve been taking my motors here for years and never had any problems… they are honest people… 👍🏼👍🏼👍🏼👍🏼
@alltorque4152 жыл бұрын
Who ever thought mike was lien is tripn, you can easily tell who be real about it. Ya should look at ya own selfs and see what ya doing wrong. Mike a real one that is out here giving us motivation
@Edward3jr2 жыл бұрын
I’m not a fan of blasting people, but sometimes people need to be held accountable. this was a very expensive lesson and sadly in this game this won’t be the last lesson you learn. You did the right thing taking it to a reputable local machine shop. I bet those guys will have that head back to you by next week.
@mrnice88x2 жыл бұрын
I used to think like that, but remember, every action has a reaction.
@ItsJustCams2 жыл бұрын
Lesson learned Fam, don’t risk quality builds and parts with folks that don’t have quality business under their belt.
@Daniel_Aviles2 жыл бұрын
Hope ALC saves your 2J, I think you handled it well, I mean you gave him a chance to right the the first motor. Plus people pretend like you don’t praise good work, support WorkCustoms Sacs Speed shop White Aaron like you pay your respects. No reason for you to not be able to speak on a bad experience, especially considering it cost thousands…
@capttj242 жыл бұрын
Where's Alc located
@itz_redmist20392 жыл бұрын
Show granny some love for us! We need another intro Granny! Much love Mike
@wrlok67542 жыл бұрын
He literally got the motor, stole some of your bolts and valve covers and then sent it back 🤬
@e30sdontrun862 жыл бұрын
“Stole some of your bolts.” Has me weak 💀
@s13intheworks2 жыл бұрын
Always send a tap through the holes for oil pan bolts to get all the silicone out or the block will chip like that every single time. It’s always a good idea to run the bolts through a die as well.
@superduty45562 жыл бұрын
Wire wheel threads at the very least.
@censordat2 жыл бұрын
Miguel don't build 2jz engines, he builds finessin' schemes LOL
@801kyle2 жыл бұрын
Sorry you gotta deal with shady people man! But we all know they can’t keep you down and the new 2JZ will be fire🔥
@internalcombustion87442 жыл бұрын
is your photo a vrx lancer ? n/a 2.4L ?
@801kyle2 жыл бұрын
@@internalcombustion8744 2006 Lancer Ralliart! N/A 2.4l with a 5 speed manual.
@JuiceDraticZ2 жыл бұрын
Very Glad you caught everything! This is why I build my own engine every time, unless something has to be machined that's the only time it change's hand's. That's the most shady shit I've seen in quite a while and definitely constitutes a ass whopping of some sort. But in the long run, he will lose mad amount of business just off this right here.
@tomcat1142 жыл бұрын
Nobody cares more about your engine then you will period.
@A1Aquatics2042 жыл бұрын
Truth
@eyecandyquartz84942 жыл бұрын
Hell man i had a methanol injection system installed by my tuner..they didnt put a relay on the boost controller to cut boost if theres a error on the meth injection didnt intal the solenoid valve that prevents siphoning an left the cap off the meth..tune was good but def shoulda just did it myself
@joed92692 жыл бұрын
Facts
@erisgh0sted9612 жыл бұрын
Homeboy earned a srs case of the beats. Fuck Miggy Broke It.
@PDNW2 жыл бұрын
13:28 Look at the screenshot. Dude knew he skimped out. He was trying so hard to over sell and get the motor in just so it could blow again and all the work he didn't do could be overlooked. The more confident someone is in their work the less they'll try to sell it to you. They'll just show you what they can do and let you be the judge.
@joshc98462 жыл бұрын
"The same way it came is the way it's leaving." ://
@GusGus-xu5vs2 жыл бұрын
The dislikes will be from Miguel and his homies lol
@castiland10002 жыл бұрын
Hopefully he’s giving them a cut from the ppl he ducking over
@mitch24562 жыл бұрын
No more dislikes button :(
@Clutch_Gameplays2 жыл бұрын
This is appalling, letting someone who’s supposed to be a top engine builder disrespecting such a beautiful platform. When I start my shop, I will not let shoddy workmanship fly. I’m so sorry this happened to your 2J, Mike.
@ilack46112 жыл бұрын
The more obstacles you overcome, the more mental strength you have! Just keep going Mike! I hope you can find reliable people to work with soon. I like your content🤙
@shakotanengineering60492 жыл бұрын
as an aspirng engine builder, this is heartbreaking.real passionate car enthusiast know our car community is small and networking is all we have.all bad apples must be thrown out so the bunch isn't contaminated. Ill never understand people who practice this unprofessional in their organization.lots of engine builders deal with engines for the first time and still wont rip you off.its all about the mentality of the builder. Keep your head up!
@LSMykie2 жыл бұрын
If I could pay for the “best shops’ to build my 427 ls3 I would shouts out to those that can but this is the reason my C6 Corvette is in pieces.. I honestly hate this part of this industry. Shout out to Mike for exposing one of many janky shops n engine builders
@TheJsheffield2 жыл бұрын
Didn’t Sac speed shop build all mikes ls3s
@LSMykie2 жыл бұрын
@@TheJsheffield sac building mike’s vettes. I’m talking about my 427 LS3
@TheJsheffield2 жыл бұрын
@@LSMykie have you tried Texas speed
@LSMykie2 жыл бұрын
@@TheJsheffield Mike Henson from Street Outlaws is machining my block in Oklahoma. TSP wants 4k for the setup I want and that’s only the block. For the entire motor it’s 12k. I don’t want to cut any corners but I don’t want to sell my left nut and right arm too 😂
@TheJsheffield2 жыл бұрын
@@LSMykie 😂
@obeewon15982 жыл бұрын
Just shaking my head through this whole video. Wanted Miggy to redeem himself. Damn.
@Its_Mike_Myke2 жыл бұрын
Man super trash
@thegoldway32342 жыл бұрын
If more people that made car content made these type of honest videos showing how messed up shops are and pointed everyone in a better direction it would be a completely different car community for the better frfr
@Its_Mike_Myke2 жыл бұрын
This is 100% facts… people be to scared to speak up about things. The problem with that is people shoutout people out and have everybody thinking it’s good to use them people, but then they silently stop working with them. I refuse to shout you out publicly and diss you silently… if I can help somebody avoid going through what I went through, I’m good with airing the facts out.
@devilxkizr15932 жыл бұрын
@@Its_Mike_Myke facts
@jackmagnium61152 жыл бұрын
@@Its_Mike_Myke thats true. but it also paints yourself as a bounty target so be careful. the last thing you want is to get robbed or screwed up big time as in losing everything
@kyleyates50782 жыл бұрын
Definitely made the right call to look at it before you did the install! Thanks for the video brother!
@kyleyates50782 жыл бұрын
Please let Granny know we love her and we pray for yal!
@emorej49352 жыл бұрын
Please do some work with the SC300 mean time, body work, colour, rims etc so when the engine is finish. It's straight road. Thanks.
@thekoupekid2 жыл бұрын
Bruh that was one of the worst engine builds I’ve ever seen. Just put some oil in it and start it. 🤦♂️😂
@bucugorillagaming2 жыл бұрын
That dude knew damn well he ain't did shit to that motor. Then has the nerve to talk shit about you for calling him out on it. Bad business
@verdict11092 жыл бұрын
Should send it to real street performance or powerhouse racing. I'm in New Zealand but both real and powerhouse have been tops with their work and service even though I'm on the opposite end of the world. I highly recommend them!
@Doughboaaa2 жыл бұрын
It be the most genuine people gettin used the most 🤦🏽♂️keep ya head up myke karma is real and god sees that this shouldn’t be happening to you time will tell brotha thank you for always uplifting me with the dope content!
@fourleafcloveer50112 жыл бұрын
He's be genuine if he built it himself.
@iTzDeXx_Dc52 жыл бұрын
@@fourleafcloveer5011 He's not an engine builder.. that like saying you'd be more genuine if you built your own house
@fourleafcloveer50112 жыл бұрын
@@iTzDeXx_Dc5 please elaborate, one needs contractors, and the other needs one single person with a chilton. How is that even close? There are no "house" fan boiz. So yeah, please elaborate
@zerberus25252 жыл бұрын
Nah just idiots that dont know shiat gettin it 👌🍻 open ya eyes use ur brain nd mind...
@fourleafcloveer50112 жыл бұрын
@@zerberus2525 Can't trust nobody bro. they will lie and cut corners so what you do is: Build your own shit. I know mikemyke can do it. And if he did it himself, ain't nobody can tell him nothin. He the man right? So step it up and get on the build your own engine, level. It's not hard. And don't race and beat on a car if you're not willing to have that cylinder head off and back on within an hour.
@victormontanez83932 жыл бұрын
Man I completely understand what your going through. I had saved up for 3 years just to build my engine properly. The local "engine builder" took my money. Said he installed "forged" pistons, rods, cams, arp everything. Well turns out nothing was done except for power washing the block which the block was cleaned beforehand. O also added cheap paint which rubbed off. Needless to say my engine blew at the dyno. When I tore it down myself. I discovered nothing was done. Dude took my money and took flight. I am now currently saving up again and hopefully I will have something I'm proud of within 2 years. Fingers crossed. Good luck with your build and God bless brotha.
@Chaos4Eva12 жыл бұрын
Damn man... That is insane
@937MIK32 жыл бұрын
Buddy didn’t do nothing but put a new pick up tube in it lost hardware in the process then kept the valve covers and sent it back 🤦♂️
@matthewcgomez2 жыл бұрын
dam i feel your pain, my dad just screwed out of 2 race motors he had built by Rick Faucet. at least you got yours back, we got no $ and no motors back. the scammers are real these days smh
@ORego-em8yf2 жыл бұрын
So sorry Matt, I sent him over 800 dollars for stuff and no show! Lesson learned, never again! I had almost forgotten about it till I read your post.
@j.sargent91722 жыл бұрын
Glad youre getting it fixed before trying to run it, wouldve grenaded fast
@TeamUnfairBear2 жыл бұрын
100% every time i have helped someone try to build their names. they screwed me so hard.
@carlbutler20802 жыл бұрын
I personally think you can still use this jz once they clean everything and get it done the right way…
@AnEvilpancake2 жыл бұрын
Shiiiiit is it time to take him to court?? Seems like a chunk of change to fix all that.
@khoalu35002 жыл бұрын
I'm glad you decided to take it apart.
@allancooper38652 жыл бұрын
Bro he obviously had to know , that you were going to go over it , and find all this bull she it 😑🙄🤢, homeboy is either high on some shit , or he really is trying to make you flip out so he can destroy what you’ve built , and must feel some type of way about your relationship and took something personal , cause apparently this was purposely done or he just wanted to jack up your engine , and this was his big “ F “you , 🤷🏻♂️ thx for sharing this PSA on this crook
@RpChris7072 жыл бұрын
Man did he even do anything. Looks exactly the same as when you sent it in before.
@gregorygolden12962 жыл бұрын
I feel for you, I had a racing engine builder burn me good. When you put a lot of hard earned money into a engine that ends up not being what you paid for, really sucks. He got me and a couple others also. I learned....the hard way.
@Que_JZ2 жыл бұрын
Shout out to mike for keeping the positive vibes I would be mad
@michaelolson27572 жыл бұрын
You need to find a good engine builder. They are out there,it just takes time. I found a very good honest guy 30 years ago you dose a phenomenal job!
@StylenFlow12 жыл бұрын
If you gave dude money you need to sue his ass at this point smh
@Itz_ZVNZCY2 жыл бұрын
Myke mike that cat was really minding his business yet you go chase it🤣🤣🤣🤣shit was funny yo
@bigbosha52702 жыл бұрын
Shooooooo!!!!! Shes a little rough for a fresh build... I've had this happen before and I wish I could reach a large group of people like you can to share my experiences with people. It isn't about making someone look bad, it's about making sure our little family gets the things that they pay for. And work so damn hard for. Love that message at the end too man. I don't want my brothers and sisters in this community suffering like that. We're all in this together. Ban low performance drivers/builders, not high performance cars
@MrSupra88turbo2 жыл бұрын
The price of 2jzgte parts nowadays too! Dam that sucks. Props to you for keeping your composure. A real review of the work done to your engine. I hope you are able to salvage most of those parts.
@caribshogun97722 жыл бұрын
Mike that's your hard earned money. Either do the actual build yourself or go through an experienced engine builder.
@frantzalvarez85512 жыл бұрын
I’ve never been this disappointed in an “engine builder’s “ work I could’ve done bad on my own
@mikemart84752 жыл бұрын
Wen u pay for a professional service u expect quality work.
@clayboyXx2 жыл бұрын
Oh hell yeah! Mike myke always posting at the most clutch times 🔥🔥
@triggersnob97222 жыл бұрын
Man, your alot calmer than I would be, nobody deserves to be burned,this guy didn't even put the manifold gaskets in, shit was missing ARP shit missing..... I know this wasn't cheap, sucks hopefully you can get it fixed 🤞
@jaystrongsgarage39132 жыл бұрын
Soon as i clocked out of lunch👌🏽
@ilack46112 жыл бұрын
Same
@BC2FITTY2 жыл бұрын
I honestly would have lost it bro , i commend you for keeping your composure and not lighting ol boy up !
@deejayy64482 жыл бұрын
12:04 you can just hear the frustration in that breathe smh. Gave miggs the benefit of doubt until you guys took it apart and damn the lazyness is beyond me.
@luisuribe54322 жыл бұрын
That engine was horrible
@spumaticcarz2 жыл бұрын
Damn so messed up!! I’m glad you check the motor before putting it in
@TrillMurray2 жыл бұрын
Bro you said in your last video that you've already had 2 builds from homie die. This is on you honestly. Sounds like dude provides a consistent product and you keep coming back for more.
@limelightperformance2 жыл бұрын
I recommend justracing in Las Vegas Nevada. Internal balancing, line boring , cnc honing , proper 2jz machining for high horsepower 2jz’s and other platforms.
@nx2kdet2 жыл бұрын
WoooooW. Not gonna line when I first heard about this story I still had some skepticism because I didn't know the whole story. Talked to the miguel guy once about possibly doing some work but after watching the full breakdown of the motor, sheesh. Sucks man.
@powpow50cal242 жыл бұрын
Good service isn't cheap, cheap service isn't good. This has been my Ted talk, thank you.
@coreyhickman90822 жыл бұрын
Sorry you have to deal with this Mike, this build is just gonna be that much more!!!!
@chrisej2072 жыл бұрын
Oh you are the one posting on the JZ groups about this guy. I had a GE mani and dp fabbed by him. This video solidifies my thoughts on having a local shop that does the building and tuning all in house.
@yrrrrrrrrrrrrrrrrrrrrrrrrrrrrr2 жыл бұрын
mike is to great of a person to be dealing with this shit lmao
@motoman22atgmail2 жыл бұрын
You were very fair and patient and gave him every opportunity to get it right. Hope it works out for you in the end.
@pappabear21192 жыл бұрын
Damn man I’m sorry you have to go through this and with the market the way it is those motors specially the GTE ones have gone up in price. Who ever is saying your doing this for attention really don’t know mechanics, hopefully everything works out in your favor man
@meanmarcvetted9522 жыл бұрын
Watching this got me heated like it’s my motor!!
@michael551162 жыл бұрын
Damn...I had a machine shop not do the porting on my head fully. They assumed I didn't know what I want and did a basic porting..which was choking the motor due to the cams. When I went back with the dyno chart..they told me up front..ok we didn't go as far cause the guy assumed it was going to not be for what I said was going in. I will say that when I brought the cnc heads with the new parts, they did take care of the work due to their error. Hopefully dude mans up on his bs.
@austincooper5662 жыл бұрын
Daamn Mike Mike that man got over on you hard!! I'd be trying to get my money back for sure. Sorry that happened to you
@TheFluffy20132 жыл бұрын
Don’t worry mike this only means the 2JZ will come back even stronger and crazier!!! Can’t wait to see the finished product from professionals that actually take pride in their work!
@acedrifts2 жыл бұрын
What I don't understand is if he wanted to hide stuff from you and cheap out on things, He could have done that and still have the engine at least be able to start up and run OK. But from the way he put together that engine it was guaranteed from the getgo to not run at all and blow up, And he knew this, Any good engine builder would have known that that engine was completely garbage from the beginning, But he went ahead and sent it out to anyways and he had to have known that it would have tarnished his name and got him a lot of hate. so why sent out a engine in that condition knowing it's gonna ruin your name??
@jackmagnium61152 жыл бұрын
for a quick buck thats why
@_Hani_262 жыл бұрын
Very often people don’t realize how much time it takes to just clean all the components during a build. That includes from the tear down to machining to then mock assembly to check clearances and final assembly. You get what you pay for. Also I refused to run a customers powder coated valve cover on an engine i built for him because of how much sand and paint powder was in it. I had him sign a waiver that said if he runs that and not a new valve cover I’m not responsible for the damage. I can’t guarantee someone else work.
@kurtjago21972 жыл бұрын
What a mess bro, sorry to see this shit happen, lesson learnt I guess if anything. Be safe 🙏
@MV-ri7zu2 жыл бұрын
Should have been learnt the first time is all im saying, but yeah sucks to see this happen.
@mikedeguzman31432 жыл бұрын
You stayed very humble mad respect 🙏 that guy has no business working on others vehicles period
@rattletrapfox10012 жыл бұрын
Wow! Checked him out on insta and he took no responsibility for what happened. Dudes put him on blast for how he anchored the block via fuel lines/injector and he danced around that shit. He’s up to no good and didn’t even own up to it. Some people man….
@elijahc92932 жыл бұрын
Wtf was dude thinking sending the motor back in the same condition it came 😂
@goforbroke22 жыл бұрын
Coming from someone who used to work in the industry. A 1000Hp build that runs Reliably is not going to be cheap to build, you get what you pay for in this industry like many things in life.
@cjcox14802 жыл бұрын
Dawg he kept your nice shit and gave you back all the original stuff. He’s got a brand new block and head.
@itsjames19692 жыл бұрын
That's a MAJOR BEAT DOWN. He rep has dropped so much after this video. Trust your gut/instinct from now on.
@Plumber11112 жыл бұрын
I'm a air craft machinist. Everything has to be perfect and look new from the factory. That is up there with the shotty work I've ever seen. I don't know about cars. But we have a agency called the FAA certification board that we can report issues like this too and revoke their machine shop license.
@FreelyRoam2 жыл бұрын
Looks like you got the "ima take yo parts and use it on my build, u take all the scrap laying around the shop, all cleaned up" treatment. Sadly and typical... you will win in court. I've taken a man's whole life due to something like this.
@quietcool48842 жыл бұрын
as soon as I heard "shit bouta look gooood" i would have ran away full speed lmfao !
@jimmyharris92612 жыл бұрын
Thats some straight talk....I would feel tha same way bro, that was some bold shit for him to do....I wouldn't handle and feel no different.....you spoke straight facts my guy....
@doritotito48872 жыл бұрын
Damn bro can hear and feel the pain in your voice! Hope things start to look up soon brother 💯❤️
@thekaotyk2 жыл бұрын
He legit just took it apart, took your parts and half a jobbed built your engine with his parts. This dude played you for a fool bro, I would go show him your not.
@r1learner1782 жыл бұрын
If you wanted to see if they did the caps up right get a beam type torque wrench (old style and cheap) because they measure both ways and you can see the breakaway torque. New type torque wrenches might do this also - you would have to check if they do but. Looks like they cleaned the inside of the oil pan but not the outside.
@thecheshirecat2992 жыл бұрын
He didn’t even spray it down with “Break clean” before giving it to u lol
@emorej49352 жыл бұрын
What about the Toyota Supra MK5? Waiting on that also.
@stratosphere12 жыл бұрын
“The same way it came in is the same way it’s leaving”. Damn he wasn’t lying!
@josearellano61552 жыл бұрын
If you guys were in mike myke shoes paying for all ur stuff to get properly fixed and get it done right and it comes out bad then you guys would be feeling the same way he’s feeling right now. I hope everything works out with the engine! Keep ur head up.
@lvpheno70252 жыл бұрын
When we pull motor apart we clean everything in a solvent tank. Then a hot tank for two or three cycles then back to a clean solvent tank and then on engine stand and we you a air gun that has a siphon hose put the siphon hose in dish soap and water mix and blow soapy water through every single water and oil galley in the block and clean everything then rinse with water then blow everything off with the high powered air compressor then when is fully dry we wrap it in bags until ready to be built. Then before being built we clean it all again
@tejay94162 жыл бұрын
been one of your IG followers for a long time todays the first day I came across your YT channel youre dope man! keep up the mint work 🙏🙏
@johnright5282 жыл бұрын
Like a wise man once said to me if we want something done we have to do it ourselves.... Time and money are life and eather one can be replaced.... I hope we Get to see this BEAST running soon dude. 😁👍👍👍👍
@calebmichie28542 жыл бұрын
I work at a machine shop. We don't put the tin on motors. ( Won't put on valve covers or timing covers oil pans intake, ect ect.) Because one. People can complain about leaks when it isn't. That's fair. But what I've realized too is people can see in the motor. See it's clean. Next time don't let them put your tin on. So you can see more of the motor.
@RobHTech2 жыл бұрын
That is some shoddy work. Dang. Hope he gets his money back. A lot of pro engine builders blueprint the engines and keep paper work on them for their records. That's one way I have shaved through phonies.
@kieljiro49812 жыл бұрын
Nahh you gotta call him out harder. Cuz he’s gonna keep doing this. No matter what.