Do these 5 things BEFORE you drive your WLToys 124019, 124017, 144001

These 5 steps should be done before you take your new rc out for a rip. it will save you time money and headache in the future. and it will run way better.
Buy it here: and use coupon code BGAFF10OFF
www.banggood.com/Wltoys-12401...

[@krashkingrc9715]

Great job definitely something all companies seem to hit and miss some you win some you lose

[@RCVOODOO]

no doubt, better safe than sorry

[@theclickbaitdetective9196]

Man i can’t wait till this bad boy comes in the mail. More excited to take it apart and do all this then i am driving it somehow, ha!

[@RCVOODOO]

That's part of the fun!

[@TonysRcTechboom]

I always check my Diffs before a good Use , had to do it with the 144001 and check my Nuts 🤪 anyway fantastic Tips and How to Video bro , its sounds butter Smooth ,👍 I really enjoyed it 👍😉👍

[@RCVOODOO]

Thanks bud. Always enjoy reading comments from you. BOOM! 💪

[@jasonmorgan661]

I didnt have grease so i used peanut butter. Threw jelly in my shocks. Put the damb thing on bread and ate my Traxxis all up!. Ill read the instructions next time.🤔

[@RCVOODOO]

Jelly shocks FTW

[@jasonmorgan661]

@@RCVOODOO im Damaged goods🤕

[@chriscraft77022]

i just got into RC.. i bought a bunch of WL toys.. your videos are the best.. no lie... im going to be doing videos on my other channel.. ill hit you up.. i subbed, thanks

[@RCVOODOO]

Thanks bud. Appreciate it👍

[@sinisterrc9618]

I just ordered the 124019 thanks for the tips.

[@RCVOODOO]

No problem. Have fun

[@PERTHWESTOZRC]

Good advice brother and yep they skimped on the grease alright, mine was basically bone dry, and the oil was topped up to the top on the shocks, I made a video on it a few days back. Definitely have to check these cars before taking em out

[@RCVOODOO]

For sure pays to give them the once over pre bash

[@Cpt_Nathan]

Swap the wheel nut for the shock nut and then you will have nylon thread locking nut on your wheels where it should already be.

[@RCVOODOO]

Very good 👍

[@norcalrc]

Good knowledge being shared here. Thx bro

[@RCVOODOO]

You bet!

[@rctrooper7261]

That's great advice buddy. That's also why I prefer kits over Ready to runs. Great video as always buddy.

[@RCVOODOO]

yea when you gotta basically rebuild it anyway haha unfortunately they dont offer these as kits

[@3dman875]

Great video and a lot of good information that you for making it even those i don't have one

[@RCVOODOO]

no problem bud, thanks for watching!

[@ShenRC]

Good tips! boy they really skimped out on the grease!

[@RCVOODOO]

yep and overfilled the oil lol

[@KurtsRCs]

Nice video with great tips

[@RCVOODOO]

thanks bud

[@metaljew4456]

Great video! I just SUB’d. I have that exact WLTOYS on order. Can’t wait till it gets here!

[@RCVOODOO]

Thanks for watching👍

[@RcNickster709]

Yeah I am not surprised the gears are dry like that. Unfortunately it happens. But it gives us something to do when we tear them down to inspect.. ;) I gear udder butter is pretty good.. I typically go with what ever marine grease I happen have.. ;) Oh and very true on the loc-tite .. A little DOES go a long way. All great tips bud. I am sure this will be very helpful to lots.. Thanks for doing it

[@RCVOODOO]

thanks for watching bud appreciate it

[@bobaque70]

Good advice Voodoo

[@RCVOODOO]

thanks bud

[@rcsnapon2132]

Awesome video buddy

[@RCVOODOO]

Thanks for the visit

[@AdventureTimeRC]

Had to re watch the video i got mine in the mail finally 😀

[@RCVOODOO]

Nice👍 thanks bud

[@LindenRc215]

Great info 👍🏾

[@RCVOODOO]

Thanks; 👍

[@DestructionRC]

great tips man

[@RCVOODOO]

Thanks bud 👍

[@zechariahstephens5683]

Good advice

[@RCVOODOO]

:)

[@williamtrapani5941]

Thanks for the tips! Just got mine and I can't wait to run it after I correct these issues. Question for you, is the shock tower the same as the 144001? Great video! Thanks

[@RCVOODOO]

Everything is exactly the same as the 144001 except for drive shaft, the upper deck brace and chassis plate

[@irf888]

Hi. Excellent video. Many thanks for making it. Regards.

[@RCVOODOO]

thanks for watching

[@irf888]

@@RCVOODOO Was a pleasure, thanks again.

[@dannywalker6279]

Nice video mines on it's way, would you recommend white lithium grease in the diffs it is that too light

[@RCVOODOO]

Ive Never tried that couldn't hurt to try

[@sjoervanderploeg4340]

Nail polish works as well!

[@RCVOODOO]

good tip 👍

[@CallMeAdam2023]

I cant believe they are still even making RCs with Philips screws. I hope the 1/10 version they finally use hex head screws. Thanks for the tip about the a-arm angle, I'm still waiting on my 124019 I imagine I wont get it till after the 1/10 version has been shipped.

[@RCVOODOO]

I'm not of a fan of the Phillips either but it is what it is I guess .

[@CallMeAdam2023]

@@RCVOODOO most of the people in the hobby probably arent

[@seansrcconstruction]

Cool tips

[@RCVOODOO]

thanks bud

[@yanusurya5542]

Have you ever tried to change the tower shock with the metal upgrade parts from 144001? Does any other upgrade parts from 144001 can be installed and fit in 124019?

[@RCVOODOO]

Almost all parts work. Besides the driveshaft top deck brace

[@Das-Veilchen-X]

Cool Video Bro 😎💪🏻

[@RCVOODOO]

Thanks bud

[@Das-Veilchen-X]

@@RCVOODOO I'm looking forward to mine but will not be shipped until November 28th although I ordered it beforehand from Banggood Wish you a nice Sunday. lg Max

[@RCVOODOO]

@@Das-Veilchen-X yea. The preorder was sold out the first day... Even if you ordered on the first day it had to be early to get in the first wave..

[@Das-Veilchen-X]

@@RCVOODOO ok thx for the Infos. Lg

[@bevinsracing]

Are these 12mm hex? I just ordered the 124019 want to put foams on it

[@RCVOODOO]

Yes

[@kallerapia9692]

Which battery setup i should To take? the car and 1 battery or car nd 3 battery es included? (wltoys 14019)

[@RCVOODOO]

More batttries is always better. More play time. Less waiting 😁

[@eduardomalcom2228]

Hello Great info... How can I tell that spreads are missing grease and require service, without opening them? Thank you in advance

[@RCVOODOO]

you can almost guarantee they are missing grease from the factory

[@eduardomalcom2228]

@@RCVOODOO That's how it is from the factory, they come empty, but I mean that having already filled them, how do you know what you need without opening them... Some tips.. Thank you

[@RCVOODOO]

@@eduardomalcom2228 maybe open and refill once a year. depending on how much you run it. it dont normally lose much at all

[@pestilizer4070]

Should i clean out the old grease from the diff before adding new stuff?

[@RCVOODOO]

it really doesnt matter there is no reason to unless you just want to

[@pestilizer4070]

@@RCVOODOO okay sweet! thanks for replying.

[@wintxrx4909]

it seems like such a headache to take it all apart

[@RCVOODOO]

Yes. But worth it. Plus you get the experience of learning your rc and how to replace something if you break a part. I do this regardless if it's really needed or not on all my rc's. Even crawlers

[@wintxrx4909]

@@RCVOODOO how long does it take?

[@magedmokhtar8678]

Is the 60 wt silicon oil shocks are good for the 124019 model?

[@RCVOODOO]

60 sounds a little thick to me but it is definitely usable

[@butchmeister80]

Lot of hassle having to do this before using it and looks fiddly problem is can’t get these in uk stores so warrant be an issue

[@RCVOODOO]

I guess it's the price you have to pay for cheap rc's.. The (lack of) quality control is where they save money. Once you get it lined out they are great little rc's

[@azazasiswoyo1810]

New to the hobby. I don't have any grease, but my buddy has 30k & 50k silicone oil.. label says 'differential' Can i apply those? Or it has to be that grease?

[@RCVOODOO]

Most oils will just leak out these diffs are not water tight. I would look for a grease

[@azazasiswoyo1810]

@@RCVOODOO alright, will do. Thanks for the response

[@xdecisiion1533]

Hi, I am struggeling to find the problem, maybe you can help me! If I drop the car, it does not come up all the way again, but the shocks stay down a bit, is it because there is too less shock oil inside? Thanks

[@RCVOODOO]

Shock oil only makes it come up slower. Sounds like the springs needed adjusted down with the adjustment rings on the shock. tighten the rings to make stronger springs. That would be my guess

[@Serial1977]

@@RCVOODOO I have a similar problem, front left shock gets stuck when I push it all the way down. I think maybe I bent it slightly? Can't really see it with the naked eye.

[@Serial1977]

Confirmed it was bent slightly. I unscrewed it bend it in place and now it doesnt get stuck anymore

[@chrisf5475]

I’m new to using rc car controllers (flown rc planes for years) can somebody tell me please, is it normal to have a delay with the motor changing direction going from forward to reverse? Is this because of braking... maybe it won’t let me go straight from forward to reverse at speed to protect the gears?

[@RCVOODOO]

that is normal and designed to save the gears from stripping the first trigger push forward is brakes the second push forward is reverse.

[@chrisf5475]

@@RCVOODOO thank you! I had a tamiya in the 90s but was using a normal twin stick controller and didn’t have braking. Used to just ram it in reverse as a handbrake haha. I’ll get used to it : )

[@RCVOODOO]

@@chrisf5475 no problem bud

[@M.TTT.]

If the RC hits/bounces when dropping, maybe it needs more oil?

[@RCVOODOO]

Its got to be tuned. if it bottoms out easy. Maybe go with thicker oil. The bouncing is usually because of not enough oil

[@M.TTT.]

@@RCVOODOO ah okay, thank you, I bought some thicker oil thinking it would help so that was a good call. I'll have to try it, on a 12428

[@JohnDiseranno1992]

Hi, there's something wrong with my RC car (the same as in the video). It will run normally but then it suddenly stops working. I think it could be the ESC that got a bit wet or overheated yesterday. What do you think?

[@RCVOODOO]

it could be many things thats a hard thing to figure out with only that much info. is the battery charged fully?

[@JohnDiseranno1992]

@@RCVOODOO yes, I had 2 batteries and both fully charged overnight. Yesterday I ran both of them out straight and I noticed the car quite hot. The car also went in the puddle

[@JohnDiseranno1992]

@@RCVOODOO and the LED light starts blinking

[@darkki94]

just got my 124018 and i think the rear shocks are underfilled , they feel really soft , a drop from 20cm bottoms them out

[@RCVOODOO]

You can adjust spring tensioner or check the oil.

[@darkki94]

@@RCVOODOO the pre load is at max and i bought a 700 cST oil and replaced the stock one , they still feel soft and bottoms out way to easy :(

[@JohnDiseranno1992]

Hi, can I fit a 3s battery straight from the box? I've seen people who did that and worked but I'm not sure

[@RCVOODOO]

Only if you got the version 1 first release long ago. 3s will fry the esc in everything after version 1

[@RCVOODOO]

You might get one run,you might get 3 or it will fry it instantly. Its not 3s rated

[@JohnDiseranno1992]

What upgrades do you recommend for a 3s battery?

[@RCVOODOO]

@@JohnDiseranno1992 the surpass hobby combo

[@jameswisecarver]

I dont loctite plastic unless it was previously stripped

[@RCVOODOO]

Loctite eats into plastic and can make it brittle. Youre better off using a small drop of super glue if it's going into plastic

[@bert1913]

If stripped, I use 3mm heli coils

[@argg.x]

why did you say to not pack it with grease? i watched a few vids and everyone does it differently

[@RCVOODOO]

If you pack it it causes the diff to be tight. Try it and see. The axle will not turn as smoothly and effortlessly. You can always take it back out. It Causes the motor to work harder with the diffs packed tight. More strain on the motor less efficient battery. Shorter motor life

[@mulberry8930]

Actually if you packed it with grease, it will be heavier to turn until you break in the grease. The excess grease will leak and the remaining will stay to butter your gears.

[@jamesjanssen3158]

Hey man, can i use 30k Hudy sillicone oil in my diffs? (124019)

[@RCVOODOO]

I'm not sure how thick that is. But it better be realllly thick or it will leak. These diffs aren't sealed

[@jamesjanssen3158]

@@RCVOODOO ok thx I think it's thick enough, so I'm gonna try. Thanks for you're reply!

[@creamontop6969]

@@RCVOODOO use universal multi lube grease (not oil = it leaked into difs) Peformance level : NLGL Grade 2, DIN 51 502, KP 2 K-30, MAN 283 Li- P 2

[@villedocvalle]

Hey man can I run a 6200mah 80c Lipo on this stock?

[@RCVOODOO]

Sure. As long as its 2s and fits. I doubt a 6200 will fit unless you are doing some mods,so Like adding wide battery tray

[@jasonmorgan661]

No you need 12s 200c 8000mah then as soon as you start just floor the throttle😁. Btw Dont do that 🌞

[@villedocvalle]

@@RCVOODOO I just removed the battery brackets and stood the battery on its side and secured to floor tray via the Velcro straps the battery shipped with

[@ntontosyt]

isnt it rtr?

[@RCVOODOO]

Yes but it needs some quality control from the factory.

[@rickortiz654]

Are the rear wheels wider than the front?

[@RCVOODOO]

yes a little wider maybe 1/8 inch

[@rickortiz654]

Cool. I’m looking for a cheap set of wheels for my Losi mini 8t

[@tobydyes]

half the time they seem to use Vaseline instead of real Greece

[@RCVOODOO]

thats what it looks like, and not much of that either

[@JoshJ12]

Sorry what is a loctite? New to the hobby

[@RCVOODOO]

thread locker

[@JoshJ12]

@@RCVOODOO Oh ok will applying it make it harder to repair any damages in the future.

[@RCVOODOO]

@@JoshJ12 no, just use it where screws go into metal it does nothing to help where screws go into plastic. never use red loctite you will never get the screws out of you do

[@JoshJ12]

@@RCVOODOO Ah ok thanks Mr. RC Voodo. I am a biologist in the making and just rediscovered RC (from childhood) three months ago and wanted to expand my "fleet" to a third car. Will have to buy this car since the sexy purple body made me tingle everywhere. I appreciate every help.

[@nickk8054]

It helps keep your screws in

[@cordialement4383]

The sad part is, I’ll never be able to do that. Far too complex for me... I wish I had seen this vid before buying it 😢

[@RCVOODOO]

why?

[@cordialement4383]

@@RCVOODOO I’m good in music and literacy , handiwork is beyond my abilities, plus I don’t have the tools. I bought it to play with my kid, it was supposed to be RTR

[@RCVOODOO]

@@cordialement4383 it is rtr. If it's just to play with kids you will be fine. Speed runs and hard bashing is where this is needed.

[@cordialement4383]

@@RCVOODOO oh 4 sure we gonna go full speed, there are two tracks near our house. I don’t get how they tell their workers « put too much oil in stocks and more important don’t grease diff ! ». So stupid

[@darkiee69]

@@cordialement4383 Ask someone at the track to give you a hand with these small things. The RC community is always ready to lend a hand.

[@mauritz1774]

Come on Bro buy an decend Screw driver from Wera or Garant. Your phillips driver jumps away it has Bad Handling or Grip.

[@RCVOODOO]

No one needs your opinion on my screwdriver. Are you that lonely that all you have to do is complain about a strangers tools? Come on now...

[@mauritz1774]

@@RCVOODOO I just heard mocking that the screwdriver flew on your hand twice. A German brand screwdriver would have flown less far. Because thanks to its ingenious handle design, it is suitable for clumsy hands. : D Haha

[@RCVOODOO]

@@mauritz1774 so you're just wanting to brag on German screwdrivers? I really don't understand what your point is

[@73rocksta]

German fan boys lol

[@stevemdelacruz5602]

Lots of rework

[@RCVOODOO]

what

[@jeffbryner5355]

What i did with mine was step 1 open the trash can lid. Step 2 throw the cheap chines knock off crap in the trash can. Step 3 close the lid on the trash can. Step 4 walk away. Step 5 go out and purchase a good quality rc with great parts support. I recommend losi/tlr, team associated, tekno, mugan,xray, and/or Traxxas.

[@RCVOODOO]

Well you suck. To bad you didn't know they are many parts support for this. basically all the lc racing parts are interchangeable.

[@philiplibby7536]

Parts are same as 144

[@RCVOODOO]

@@philiplibby7536 yep. But if you wanted more expensive parts the LC parts are mostly the same also

[@main_manny3226]

Lmao why did you buy one then💀

[@jeffbryner5355]

@@main_manny3226 lol oh I didn't. That was a joke. I will never buy a rc off of wish or banggood lol. I purchased a exceed terrain 10 from nitrorcx for nephew. Its the biggest pos i have bought. Traxxas or arrma is the lowest quality i will buy from now on.