Do you think your Yaesu FTDX10 sounds good? He can do better, find out how with EQ V.7 DSP!

[@VoiceofNH]

Excellent, what a dynamic presentation. Especially near the end when you go back to regular hand mic. That hand mic sounded fine at first, but after listening to the processed audio, now it sounds almost muffled without your processor. Very good my friend, 73

[@prepr8725]

great product i recommend getting it very happy with the purchase 😊

[@JbirdlLester]

Het Sergey. I got the ur6qw 8 band for my icom 7300 and really like it. i was wondering Sergey does the PIGTAIL you have in the video that goes from 8 pin to 8 pin Rj-45 come with it? Thanks 73

[@GroundControl204]

Another great video Sergey. 73

[@M7BRI]

I have one for my Yaesu 991A found the Roger does nothing but on icoms the beep works. just a mention. has anyone else found this problem

[@prepr8725]

ordered the product for my dx 10. thx

[@mr_bartender73]

Where do they sell them ?

[@slinginlead6647]

Do you have to have a wide banded radio for this to work and sound good? Thank you

[@ur6qw]

Any radio

[@АлексейПетрофф-с9ф]

@@ur6qw какая цена в рублях такой коробочки? И в Россию отправляете?

[@mirongrinev3295]

Hi Sergey! Do you have info for Heil HC6 mic?

[@musicM0VESme]

Hope you are safe. All the best

[@ronedwards8239]

Sounds good.

[@imscalak]

Where is the new firmware for v7 available?

[@derMichl]

Work this with the 891 from Yaesu?

[@ur6qw]

Dear friend. You write me commect about soft, I will not answer them, as it is not relevant to this video. We are testing the new firmware and have identified some instabilities in its work. Therefore, do not program the device, use the device with standard sofl that is installed on it. We are working on updates as soon as they are ready we will inform about this on my site

[@Pull_It_Apart_Paul_Ham_CB]

When are you going to resolve the problems and provide updates to those who have already bought your product? NOT HAPPY 😡

[@GroundControl204]

I’ve been using V6 and v7 versions on a lot of different equipment and never have any issues. Maybe you should go back to the drawing board instead of blaming the product.✅

[@bybykserg]

What problems did you mean?

[@javaman3765]

I have the V7 connected to my ftdx3000 in 4K with an audio technica AT-2035 and it sounds stellar. Loads of compliments, and articulation to the hills with the condenser mic. Beats w2ihy gear hands down and no rf in audio issues. These are very well engineered with very good build quality at a very fare price. Updating firmware is a breeze. To the guy above complaining about problems. Spell them out here. Let’s hear it as I have had none and maybe we can get you on the right track. Or contact Serge…he’s a great guy and responds quickly in support. No I don’t know him and I paid for all my gear from him V6 and V7 now. Great gear.

[@davidjeanpierre2358]

I’ve seen your video in this and after watching I was under the impression that it wasn’t the eq that was the problem. Looking at your meters and the eq as well as listening to your audio you were way over modulated and your audio was clipping badly.I run the same eq in a semi truck setup, but properly setup I get compliments on my audio on a regular basis. My environment is about 95db due to road noise and straight pipes but people can’t tell I’m in a mobile unless I say it. The noise gate works very well on this product And I haven’t had Rf in my audio. Not busting your balls or anything, but based on your video your problem isn’t the eq.

[@ur6qw]

@@davidjeanpierre2358 Studio microphones usually have a high signal-to-noise ratio and a directional diagram, so they don't pick up ambient noise in the room. There is no need to use a Noise Gate here. In this video, the goal was to demonstrate high-quality audio with a studio microphone and Yaesu FTDX10 a transceiver. There was no purpose to demonstrate how the Noise Gate worked, so it was turned off. You know, depending on the Gate settings, the background noise can be either reduced or completely cut out and the EQ V.7 does it just perfect. The Noise Gate should be used where it is needed, for example as you in road with a high noise level that will tire the listeners.

[@IZ2TXQ-daniele]

II have v.6 for my yaesu ft dx 5000 mp .... fantastic