DODGE JOURNEY PCM TCM RELAY LOCATION ENGINE COMPUTER TRANSMISSION MODULE RELAY LOCATION

[@ElectricalCarRepairLIVE]

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzbin.info/door/k_lcDzEWLs5fVRYceK3-9Q ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

[@c_mac7773]

You guys make great videos but all of the location videos I wish you would add some symptoms the vehicle would be having where you would need to find and replace whatever you are locating

[@leftreview806]

Yes

[@tarekarobinson3054]

I have a question? I have a 2010 dodge journey and I have my abs esp/bas ect. And I had took it to the shop and he said there wasnt anything wrong with anything and he said it's the computer board ect. How would I get it fix without take it too the dealership?

[@whattab7569]

i have a dodge charger r/t 2012 i have a problem with my transmission it bump or its like pushing at once while shifting between 1-2 and 2-3 gears so how to solve this? can i solve it by resetting the pcm or tcm? and how to reset? thank you guyz and your videos are really helpful but please help me with this because no one knows my problem and how to fix it

[@LubaLuba1]

Need to know where alternator relay for 2011 town and country mini van can you help?

[@OGMOKS]

Does this also work for fixing limp mode?

[@kostyantynminkin8447]

Hi, I watch your videos and they really help me to fix the issues with my car. Now I have a problem with Bluetooth in my Journey 2012, 3.6L - it stopped working. Could you please advise what the reason can be. Thanks in advance. All the best!

[@LoadScreenYT]

bad fuse , remove it (its under the glove box inside the car , passenger side)

[@helpisnear]

Thank you for hard work in developing videos to help save money. my 2010 DJ is stuck in reverse. I have removed the console. prior to the shifter stick it became difficult to shift. I have move the pink lever this still does not allow me to shift I have pushed the coil that the pink lever moves still no movement to the transmission.. also the key fob will not pull out of the ignition. can any one help me trouble shoot?

[@richardburnett9382]

2:14 18 dodge journey sxt v6 coil relay location

[@jonathanfranklin63]

do you know where the flasher relay is located on 2016 dodge journey crossroad

[@jerg5713]

Hi I watched your video on tcm removal and mine is not in same place I have a 2013 Dodge Journey 3.6L V6 can u help me out please

[@achap3604]

My 2014 journey a/c doesn’t work dealer states over and power distribution box need replacement can u teach us how to diagnose this issue? All fuses are good no power on distribution box a/c fuse

[@bobbobb7244]

P0883 Transmission controller receiving wrong voltage from TIPM. TIPM is brain of the car located inside the fuses box close to 12v battery. TRANSMISSION CONTROLLER large box located between wheel shell and bumper from driver side and has 4 plugs. Look under bumper and you will see it. Car worked perfect 2011 Dodge Caravan until I washed under hood. Drops of water sucked through the wires into TIPM. (White and Red sockets). Immediately after washing transmission start work very rough, relays in the fuse box started clicking, lights blinked, indicators says front door is open, fan radiator malfunction, brakes malfunction and etc. I saw Christmas lights in the car, very strange things and bunch of additional check engine trouble codes on OBD ii. How to fix : STOP and disconnect 12v battery wires as soon as possible. Disconnect TIPM BOX but DO NOT disassemble TIPM and fuses. Check wire sockets for drops of water. Probably you will not see water. Water can be inside TIPM. Use strong vacuum to suck water from all sockets / connectors, over fuses, over relays AND from wires plugs. Warm hot like 80°C / 200°F whole TIPM plastic box with hair dryer or heater. Vacuum it again untl it becomes cold. Repeat steps about 5 times total 1-2 hours. USE VACUUM do not blow inside! Vacuum will remove all little drops of water. Connect TIPM Connect battery wires Turn on switch to second click when lights on for 12 seconds (no run engine) Turn off switch Now turn on engine If transmission shifting very soft to D position you are win!!! Check engine trouble codes should disappear after TIPM will test them. 😁 If TIPM and wires vacuuming didn't help than repeat steps with transmission controller. Let the car dry under hood probably 2 weeks or more (depends from weather). It doesnt want to dry itself inside connectors or TIPM . Disconnect battery and open all connectors. DO NOT USE transmission when it works rough. Conclusion: yes everyone like clean car but do not wash under hood. 2ND REASON OF P0883 Bad alternator. You want to check voltage by Oscilloscope on low headlight bulb wire. If voltage jumping or you can see headlight is little blinking in night you alternator should be changed. Wrong voltage from alternator doing all electric parts work incorrectly and transmission will work incorrectly and rough.

[@justinomunoz6379]

I have a 2010 DODGE JOURNEY v6 3.5 can you please tell me where is the tcm on ???

[@jamesa1682]

Hey do you know the 2013 dodge journey torque converter clutch solenoid location if so can you send me the info please

[@Mantequilla-jw5me]

P1005 Dodge Journey 2009

[@cyurdacan]

What year is this van ?

[@tendajiakili7136]

Its a truck

[@JorgeGonzalez-vq8fv]

🇵🇷👍🚘🙏