Dodge Journey Rear Door Glass installation

Quick video On how to get glass in door

[@Eyeamfather]

You don’t have to take all that off. Steps 1. Remove panel 2. Remove small channel with the T15 screws 3. Slide the glass in at angle, like in this video. (May need to play around with it a little) 4. Raise glass up 5. Reattach the channel with the T15 screws 6. Put it all back together. You’re welcome

[@curedham2963]

yea this dude removed every damn thing on the door 😂😂

[@dccr1234]

You can leave the latch attached just take the mini channel out with T15 and rotate the window just like in the video

[@Nigel_Tberry]

I was actually able to get the glass in with just removing the lower run channel via 2 small t20 screws. That gave me enough clearance to twist it in from the top just as you did

[@danielwarren8210]

No you don’t only have to unplug window but and the most up plug and sag the panel. There to star bolts to unhook bracket and that holds glass in closest to door handle on inside and should be able to drop window right in

[@williamloeper4868]

What a Super Awesome Technician

[@bdads332]

Still helpful!

[@mikehlad9775]

Many thanks friend. Most helpfull.

[@edinbbs22]

Tanks guys 🎉 from Germany

[@slavomirgreno7910]

Many thanks. Most helpfull.

[@clintonhill9992]

Cant hear nothing...im still stuck

[@alexkocefas5241]

Looking for a video to get the entire inner door panel out …. You skip that part not helpful to me

[@williamloeper4868]

Have to unplug everything, get Regulator out of the way, remove lock, install glass, reassemble in reverse order.

[@cesarready]

Do you have some video for do that?

[@20Williamsmith]

Man I don’t miss safelite lol

[@Frank-cj5vv]

are you serious you open the whole door panel and regulator toke it out for just to put door glass inside the door , back door glass we do it in 15 mint without take anythink out ,just door panel

[@jonathanbenderman6406]

How do you take subpanel off? Is there an existing video for this?

[@dennisstephens1547]

Wrong just have to remove the small window Chanel held by two screws.

[@DubyasUFCAnalytics]

Lies it’s all one piece, well two pieces of metal welded together with black vinyl like material to cover paint.

[@dennisstephens1547]

@@DubyasUFCAnalytics guess I will have to post a video to prove it!

[@tiredaf1]

Yea o with I installed it just removing that Chanel no need to remove everything

[@tiredaf1]

Or at least loosen it up